Search results for "Bimetal"

Compressibility and structural stability of ultra-incompressible bimetallic interstitial carbides and nitrides

2012

We have investigated by means of high-pressure x-ray diffraction the structural stability of Pd 2Mo 3N, Ni 2Mo 3C 0.52N 0.48, Co 3Mo 3C 0.62N 0.38, and Fe 3Mo 3C. We have found that they remain stable in their ambient-pressure cubic phase at least up to 48 GPa. All of them have a bulk modulus larger than 330 GPa, the least compressible material being Fe 3Mo 3C, B 0 = 374(3) GPa. In addition, apparently a reduction of compressibility is detected as the carbon content is increased. The equation of state for each material is determined. A comparison with other refractory materials indicates that interstitial nitrides and carbides behave as ultra-incompressible materials. © 2012 American Physic…

XPS study of pumice-supported palladium and platinum catalysts

1992

An XPS study has been performed on samples of monometallic of palladium and platinum and on bimetallic Pd-Pt catalysts supported on pumice. A negative shift of about 0.5 eV in the Pd 3d and Pt 4f binding energies of the catalysis relative to the energies of the same levels in the pure metals suggested an increase in the electron density in both metals. A quantitative XPS analysis indicated that the supported metals did not modify the surface atomic composition of pumice

Mechanical Properties of Deformed Interfaces in Bimetallic Joints

2003

MOF-Mediated Synthesis of Supported Fe-Doped Pd Nanoparticles under Mild Conditions for Magnetically Recoverable Catalysis**

2020

Metal–organic framework (MOF)-driven synthesis is considered as a promising alternative for the development of new catalytic materials with well-designed active sites. This synthetic approach is used here to gradually transform a new bimetallic MOF, with Pd and Fe as the metal components, by the in situ generation of aniline under mild conditions. This methodology results in a compositionally homogeneous nanocomposite formed by Fe-doped Pd nanoparticles that, in turn, are supported on iron oxide-doped carbon. The nanocomposite has been fully characterized by several techniques such as IR and Raman spectroscopy, TEM, XPS, and XAS. The performance of this nanocomposite as an heterogeneous cat…

Low Temperature Investigation of the Thermal and Magnetic Properties of 1-d Ferrimagnetic Systems

1987

The series of structurally ordered bimetallic chains formulated as MM′ (EDTA).6H2O, in short (MM′), provides the most versatile known example of 1-dimensional ferrimagnets, since on the same structural support many different magnetic ions (Mn, Co, Ni and Cu(II)) can be selectively accommodated.1 Consequently, many choices of alternating magnetic moments with Heisenberg or Ising exchange couplings can be investigated. Moreover, taking into account that the M-M′ distances along the chain are alternating, this series could show at the same time an alternation of the exchange parameter2.

Submicrometer CaCuO2 and Ca2CuO3 particles from bimetallic formate precursors

1992

Abstract CaCuO2 and Ca2CuO3 are readily obtained by thermal decomposition of two new calcium and copper formates, CaCu(HCOO)4 and Ca2Cu(HCOO)6. These chemical-precursor based syntheses, while overcoming problems related to the stoichiometry of the final products, involve very short diffusion path lengths. This, in turn, results in soft treatments yielding pure phases constituted by submicrometer (≈0.4 μm) homogeneous particles.

Ni-Based Catalysts for Low Temperature Methane Steam Reforming: Recent Results on Ni-Au and Comparison with Other Bi-Metallic Systems

2013

Steam reforming of light hydrocarbons provides a promising method for hydrogen production. Ni-based catalysts are so far the best and the most commonly used catalysts for steam reforming because of their acceptably high activity and significantly lower cost in comparison with alternative precious metal-based catalysts. However, nickel catalysts are susceptible to deactivation from the deposition of carbon, even when operating at steam-to-carbon ratios predicted to be thermodynamically outside of the carbon-forming regime. Reactivity and deactivation by carbon formation can be tuned by modifying Ni surfaces with a second metal, such as Au through alloy formation. In the present review, we su…

2.8NiO–H1.8Ni0.6(OH)MoO4—Novel nanocomposite material for the reactive adsorption of sulfur-containing molecules at moderate temperature

2011

Abstract It has been found that a poorly crystalline green precipitate that forms in boiling ammonia solution of Ni(NO 3 ) 2 and (NH 4 ) 6 Mo 7 O 24 yields on annealing a Ni-rich material (Ni/Mo = 3.4) containing slit shaped mesopores and exhibiting the BET surface area of 230 m 2 /g. Characterization of the material by TGA, XRD, TEM, SEM, and EXAFS allowed to determine that it is a nanocomposite consisting of Ni–Mo (hydro)oxide layers H 1.8 Ni 0.6 (OH)MoO 4 which are pillared by NiO nanoparticles ( D  = 3 nm). The structure of the layers appears to be similar to that found in the previously described crystalline molybdate (NH 4 )HNi 2 (OH) 2 (MoO 4 ) 2 prepared in the similar conditions. T…

Bonding behavior of Bi-metal-deposits produced by hybrid cold spray additive manufacturing

2022

Abstract Cold spraying (CS) is one of the most recently used additive manufacturing (AM) processes that allow forming large 3D objects efficiently without severe thermal effects. However, due to some limitations of the CSAM process, it is difficult to achieve the desired geometry with high precision. As a potential solution to this issue, CSAM process coupled machining, that is, hybrid addition and subtraction manufacturing, is proposed to achieve desired accuracy and reliable shape. Therefore, it is necessary to assess the mechanical reliability of multilayer deposits deposited by CSAM + machining processes before that. In this work, different bi-deposits were obtained via hybrid CSAM. The…

Pd2Mo3N: a new molybdenum bimetallic interstitial nitride

2001

The molybdenum bimetallic nitride Pd2Mo3N has been synthesized by ammonolysis of the stoichiometric mixture of low sized pure oxide crystallites (2PdO/3MoO3) as resulting from low temperature thermal decomposition of precursor powders obtained by freeze-drying of aqueous solutions of the appropriate metal salts. This compound has been characterized by elemental analysis, energy dispersive analysis of X-rays, X-ray diffraction, scanning electron microscopy (field emision) and thermogravimetry under oxygen atmosphere. Pd2Mo3N crystallizes in the cubic space group P4132 (no. 213) (Pd2Mo3N, a = 6.81770(3) A, Z = 4), and presents the unusual filled β-manganese structure. It is stable under oxyge…