Search results for "CERAMICS"
showing 10 items of 1599 documents
Aurophilicity as a cofactor in crystal engineering. Dicyanoaurate(I) anion as a building block in a novel Co(II)–Au(I) bimetallic assembly
2002
A 2D grid-shaped cyanide-bridged Co(II)–Au(I) bimetallic coordination polymer, [Co(DMF)2{Au(CN)2}2], has been prepared from the [Au(CN)2]2 building block; sheets associate pair-wise by aurophilic interactions and the compound exhibits zeolite-like properties. Lloret Pastor, Francisco, Francisco.Lloret@uv.es
Understanding sigma-phase precipitation in a stabilized austenitic stainless steel (316Nb) through complementary CALPHAD-based and experimental inves…
2014
Abstract Sigma-phase precipitation in a 316Nb “stabilized” austenitic stainless steel was studied through complementary CALPHAD-based and dedicated experimental investigations. Thermokinetic calculations performed using Thermo-Calc (with the DICTRA module) and MatCalc software showed that the sigma phase (σ) precipitated directly at γ-austenite grain boundaries (GB) via a common solid-state reaction when carbon and nitrogen contents fell below a critical threshold. Residual δ ferrite was found to be more susceptible to σ-phase precipitation; this type of precipitation occurred via two mechanisms that depended on the concentration profiles of δ-ferrite stabilizing elements induced by previou…
Kinetics of Zn2+ complexation by a ditopic phenanthroline-azamacrocyclic scorpiand-like receptor.
2012
Coordination of Zn(2+) to a ditopic phenanthroline-macrocycle receptor takes place in three steps, the first one being the coordination to the phenanthroline, followed by the slow movement of the metal to the polyamine macrocycle and a final re-arrangement to coordinate the pendent arm.
Folate-targeted supramolecular vesicular aggregates based on polyaspartyl-hydrazide copolymers for the selective delivery of antitumoral drugs.
2010
Supramolecular vesicular aggregates (SVAs) have the advantage of combining the safe and biocompatible properties of colloidal vesicular carriers based on phospholipids with those of polymeric materials, i.e. polyaspartyl-hydrazide (PAHy) copolymers. To provide SVAs with a certain tumour selectivity, folate moieties were chemically conjugated to PAHy copolymers. Physicochemical properties (mean sizes, polydispersity index and zeta potential) of folate-targeted SVAs (FT-SVAs) loaded with gemcitabine were evaluated. The antiproliferative and anticancer activity of gemcitabine-loaded FT-SVAs was evaluated against two cancer cell lines, i.e. MCF-7 cells which over-express the folate receptor and…
The azido ligand: a useful tool in designing chain compounds exhibiting alternating ferro- and antiferro-magnetic interactions
1997
A one-pot reaction of NiII 1, CoII 2, FeII 3 and MnII 4 with 2,2A-bipyridine (bipy) and azide in water leads to [M(bipy)(N3)2]n chains where the metal ion is alternatively bridged by double end-on (EO) and end-to-end (EE) azido bridges; theoretical analysis of the variable-temperature magnetic susceptibility data of 1 and 4 reveals the occurrence of intrachain alternating ferro- (through EO) and antiferro-magnetic (through EE) interactions. Julve Olcina, Miguel, Miguel.Julve@uv.es ; Lloret Pastor, Francisco, Francisco.Lloret@uv.es ; Clemente Juan, Juan Modesto, Juan.M.Clemente@uv.es
Green composites based on biodegradable polymers and anchovy (Engraulis Encrasicolus) waste suitable for 3D printing applications
2022
Every day large amounts of fish waste are produced and grossly discarded in markets around the world causing environmental and hygiene issue. The use of these scraps for the production of materials with higher added value can definitely contributed to solve this problem. In this work, 10% and 20% of anchovy fishbone powder (EE), obtained by market waste, were microbiological and mechanical tested and subsequently added to polylactic acid (PLA) and to a commercial blend of biodegradable co-polyesters (Mater-Bi®). Rheological characterization suggests the potential printability of all prepared composites filaments. 10% EE filled composites showed outstanding printability. Morphological analys…
Effect of filler on the creep characteristics of epoxy and epoxy-based CFRPs containing multi-walled carbon nanotubes
2014
The aim of this work was to determine the effect of carbon nanotubes (CNTs) on the elastic and viscoelastic properties of an epoxy resin used in carbon fiber-reinforced plastics (CFRPs) in the matrix-dominated flexural testing mode. Neat and CNTs-containing (1. wt.%) epoxy resin and CFRP specimens were prepared and investigated. Three-point bending tests were carried out on nanocomposite (NC) and CFRP specimens at room temperature in quasi-static and cyclic creep regimes. The main effect of CNTs was observed in the reduction of creep compliance of epoxy (40%) and CFRP (30%), especially at higher stresses. The reduction of creep characteristics especially on viscoelastic and plastic strains …
Processing and characterization of highly oriented fibres of biodegradable nanocomposites
2015
Abstract Biodegradable polymeric materials are becoming day by day ever more important in packaging, agriculture, single-use cutleries and other large consumer applications. The major part of those materials is used under the form of film, i.e. subjected to elongational flow, but the main problem is that they often offer poor mechanical properties. Adding nanofillers, like Multi Walled Carbon Nanotubes (MWCNTs) may solve this problem but only if there is a full control of their orientation inside the material. Aim of this work is to investigate the processing-properties-morphology relationships for a system prepared under elongation flow of MaterBi and commercial MWCNTs. The materials were …
High performance composites containing perfluoropolyethers-functionalized carbon-based nanoparticles: Rheological behavior and wettability
2016
Abstract Ultra High Molecular Weight Polyethylene (UHMWPE) based composites filled with carbon nanotubes (CNTs) and carbon black (CB) modified by perfluoropolyethers (PFPE) have been formulated. All composites show a segregated morphology with nanofillers selectively localized at the polymer particle–particle interface. The composites rheological properties have been deeply investigated: the PFPE functionalities linked on CNTs facilitate the semi-3D nanofillers network formation in the composites that show a solid-like behaviour even at lower investigated filler contents, reaching the rheological percolation threshold at lower nanofiller content than bare CNTs filled composites. For composi…
Impedance investigation of BaCe0.85Y0.15O3-delta properties for hydrogen conductor in fuel cells
2012
International audience; The influence of the sintering conditions on the electrochemical properties of the proton conducting electrolyte BaCe0.85Y0.15O3-delta (BCY15) and Ni - based BCY15 cermet anode for application in high temperature proton conducting fuel cell are investigated by electrochemical impedance spectroscopy. The results show that at lower sintering temperatures due to the formation of parasitic Y2O3 phase an increase of both the electrolyte and electrode resistances is observed. This effect is strongly reduced by enhancement of the sintering temperature. The obtained BCY15 conductivity (sigma = 2.5x10(-2) S/cm at 700 degrees C) is comparable with that of the best proton condu…