Search results for "Conductor"
showing 10 items of 1270 documents
Trapping of three-dimensional electrons and transition to two-dimensional transport in the three-dimensional topological insulator Bi2Se3under high p…
2012
This paper reports an experimental and theoretical investigation on the electronic structure of bismuth selenide (Bi2Se3) up to 9 GPa. The optical gap of Bi2Se3 increases from 0.17 eV at ambient pressure to 0.45 eV at 8 GPa. The quenching of the Burstein-Moss effect in degenerate samples and the shift of the free-carrier plasma frequency to lower energies reveal a quick decrease of the bulk three-dimensional (3D) electron concentration under pressure. On increasing pressure the behavior of Hall electron concentration and mobility depends on the sample thickness, consistently with a gradual transition from mainly 3D transport at ambient pressure to mainly two-dimensional (2D) transport at hi…
Transport properties of nitrogen doped p‐gallium selenide single crystals
1996
Nitrogen doped gallium selenide single crystals are studied through Hall effect and photoluminescence measurements in the temperature ranges from 150 to 700 K and from 30 to 45 K, respectively. The doping effect of nitrogen is established and room temperature resistivities as low as 20 Ω cm are measured. The temperature dependence of the hole concentration can be explained through a single acceptor‐single donor model, the acceptor ionization energy being 210 meV, with a very low compensation rate. The high quality of nitrogen doped GaSe single crystals is confirmed by photoluminescence spectra exhibiting only exciton related peaks. Two phonon scattering mechanisms must be considered in orde…
Above-bandgap ordinary optical properties of GaSe single crystal
2009
We report above-bandgap ordinary optical properties of ε-phase GaSe single crystal. Reference-quality pseudodielectric function 〈ε(E)〉 = 〈ε1(E)〉+i〈ε2(E)〉 and pseudorefractive index 〈N(E)〉 = 〈n(E)〉+i〈k(E)〉 spectra were measured by spectroscopic ellipsometry from 0.73 to 6.45 eV at room temperature for the light polarization perpendicular to the optic axis (math⊥math). The 〈ε〉 spectrum exhibited several interband-transition critical-point structures. Analysis of second-energy derivatives calculated numerically from the measured data yielded the critical-point energy values. Carmen.Martinez-Tomas@uv.es
Neutron irradiation defects in gallium sulfide: Optical absorption measurements
1997
Gallium sulfide single crystals have been irradiated with different thermal neutron doses. Defects introduced by neutron irradiation turn out to be optically active, giving rise to absorption bands with energies ranging from 1.2 to 3.2 eV. Bands lying in the band-gap exhibit Gaussian shape. Their energies and widths are independent of the irradiation dose, but their intensities are proportional to it. Thermal annealing is completed in two stages, ending at around 500 and 720 K, respectively. Centers responsible for the absorption bands are proposed to be gallium-vacancy-galliuminterstitial complexes in which the distance between the vacancy (acceptor) and the interstitial (donor) determines…
TRANSIENT SEMICONDUCTOR DEVICE SIMULATION INCLUDING ENERGY BALANCE EQUATION
1992
An efficient numerical method for the solution of hot‐carrier transport equations describing transient processes in submicrometer semiconductor devices is proposed. The calculations of transient processes in submicrometer MOS transistor were carried out and compared with the results obtained by conventional drift‐diffusion model.
A DSP-Based Resolver-To-Digital Converter for High-Performance Electrical Drive Applications
2016
This paper presents a low cost, simple, and highly accurate resolver-to-digital converter (RDC) for electrical drive applications based on an integrated software approach, thus allowing a significant reduction of hardware components count with significant improvements in terms of reliability, reduction of fault rate, and susceptibility to electromagnetic interference (EMI). Particular attention has been addressed to cost which is 25% off over conventional RDC. Simulations and experimental tests confirm the high quality of the proposed system.
Currents Distribution During a Fault in an MV Network: Methods and Measurements
2016
When a single line to ground fault happens on the MV side of a HV/MV system, only a small portion of the fault current is injected into the ground by the ground-grid of the faulty substation. In fact the fault current is distributed between grounding electrodes and MV cables sheaths. In systems with isolated neutral or with resonant earthing this may be sufficient to provide safety from electric shock. Experimental measurements were performed on a real MV distribution network: a real single line to ground fault was made and fault currents were measured in the faulty substation and in four neighboring substations. In this paper the problem of fault current distribution is introduced, the tes…
Risk evaluation and creep in conventional conductors caused by high temperature operation
2008
The advent of electricity market deregulation, the increased operating and overload temperatures of transmission line conductors have caused concern among TSOs (Transmission System Operators) and DSOs (Distribution System Operators) about the effect of elevated temperatures on conventional bare conductors of existing line. Nowadays building new lines is very difficult cause of increased costs to obtain rights of way, public intervention, etc.... Cost and lead times required to place new lines into service are now increased and the business in electric market is reduced for the limited possibility of transmission. Therefore, utilities are attempting to gain as much capacity as possible modif…
Reliability Analysis of a Stand-Alone PV System for the Supply of a Remote Electric Load
2010
The work presents a reliability analysis of a stand-alone photovoltaic system for the supply of electric loads located in remote areas not easily reachable by the low voltage distribution network. The analysis is performed by characterizing the electric load behavior by means of a Montecarlo approach for taking into account the stochastic variability of the electrical energy demand. A Montecarlo approach is used also for evaluating the electricity production of the stand alone photovoltaic system as a function of the hourly solar irradiation of the installation site. The variability both of the load and of the energy production are correlated and the probability that the load can remain uns…
Novel test bed for induction heating power supplies
2006
Power supplies used in induction heating industrial applications must be entirely tested after its manufacturing in order to assure its security and reliability by means of a full power running test of several hours of duration. Nowadays this test is done with a dissipative load which implies a large waste of energy. This paper proposes a new high efficiency test system for induction heating generators. It incorporates a regenerative electronic load which allows an extraordinary improvement of the efficiency of this test with an important economical and ecological benefit.