Search results for "Contact angle"
showing 10 items of 138 documents
Nonporous, Strong, Stretchable, and Transparent Electrospun Aromatic Polyurea Nanocomposites as Potential Anticorrosion Coating Films
2021
This study, for the first time, focused on the fabrication of nonporous polyurea thin films (~200 microns) using the electrospinning method as a novel approach for coating applications. Multi-walled carbon nanotubes (MWCNTs) and hydrophilic-fumed nanosilica (HFNS) were added separately into electrospun polyurea films as nano-reinforcing fillers for the enhancement of properties. Neat polyurea films demonstrated a tensile strength of 14 MPa with an elongation of 360%. At a loading of 0.2% of MWCNTs, the highest tensile strength of 21 MPa and elongation of 402% were obtained, while the water contact angle remained almost unchanged (89°). Surface morphology analysis indicated that the producti…
Wettability and compositional analysis of hydroxyapatite films modified by low and high energy ion irradiation
2008
Abstract Hydroxyapatite-like thin films on silicon substrate were deposited using atomic layer deposition and were subjected to irradiation with Ar ions accelerated through 0.6–1.2 kV as well as 2 MeV 16 O + ions. After low energy Ar irradiation a significant reduction in contact angle was observed. However, the Ca/P atomic ratio remained unchanged. No reduction in contact angle was seen for high energy 16 O + irradiation. Atomic force microscopy showed the enhancement of floral-like pattern after low energy Ar bombardment while high energy oxygen irradiation lead to raised islands on as-deposited films.
Surface investigation of plasma HMDSO membranes post-treated by CF4/Ar plasma
2002
Fluorination treatment has been performed on polysiloxane membranes using a plasma glow discharge of a gases mixture CF4 and argon (plasma enhanced chemical vapor deposition). Atomic force microscopy, XPS analyses and contact angle measurements have been undertaken to explain the surface transformation and behavior, which strongly depend on the morphology, the composition and the hydrophilic/hydrophobic character of the plasma-polymerized initial membranes. Main result is that fluorination, which leads to hydrophobic membranes, has a more relevant effect on amorphous silica-like membranes than on polymer-like ones, according to their chemical composition whereas the plasma surface reaction …
Halloysite nanotubes with fluorinated cavity: an innovative consolidant for paper treatment
2016
AbstractHybrid material based on halloysite nanotubes (HNTs) and sodium perfluorooctanoate (NaPF8) was used as a consolidant for paper treatment. The consolidation efficiency was determined by thermogravimetry as well as by paper grammage determination. Morphological analysis of the treated paper was performed by means of scanning electron microscopy while the effect of modified HNTs on the thermal behaviour of the cellulose fibres was investigated by differential scanning calorimetry which determined the combustion enthalpy of the paper.Water contact angle measurements were performed to study the paper wettability. The physico-chemical properties investigated (mesoscopic structure, thermal…
Effect of Morphology and Size of Halloysite Nanotubes on Functional Pectin Bionanocomposites for Food Packaging Applications
2017
Pectin bionanocomposite films filled with various concentrations of two different types of halloysite nanotubes were prepared and characterized in this study as potential films for food packaging applications. The two types of halloysite nanotubes were long and thin (patch) (200-30 000 nm length) and short and stubby (Matauri Bay) (50-3000 nm length) with different morphological, physical, and dispersibility properties. Both matrix (pectin) and reinforcer (halloysite nanotubes) used in this study are considered as biocompatible, natural, and low-cost materials. Various characterization tests including Fourier transform infrared spectroscopy, field emission scanning electron microscopy, rele…
Self-assembled monolayers on a ferromagnetic permalloy surface.
2015
Self-assembled monolayers (SAMs) are nowadays broadly used as surface protectors or modifiers and play a key role in many technological applications. This has motivated the study of their formation in all kind of materials; however, and despite the current interest in molecular spintronics, the study of SAMs on ferromagnetic surfaces remains almost unexplored. In this paper, we report for the first time a methodology for the formation of SAMs of n-alkylphosphonic acids on permalloy in ambient conditions. The formed monolayers have been fully characterized by means of contact angle measurements, atomic force microscopy, X-ray photoelectron spectroscopy, matrix assisted laser desorption ioniz…
Propolis-Based Nanofiber Patches to Repair Corneal Microbial Keratitis
2021
In this research, polyvinyl-alcohol (PVA)/gelatin (GEL)/propolis (Ps) biocompatible nanofiber patches were fabricated via electrospinning technique. The controlled release of Propolis, surface wettability behaviors, antimicrobial activities against the S. aureus and P. aeruginosa, and biocompatibility properties with the mesenchymal stem cells (MSCs) were investigated in detail. By adding 0.5, 1, and 3 wt.% GEL into the 13 wt.% PVA, the morphological and mechanical results suggested that 13 wt.% PVA/0.5 wt.% GEL patch can be an ideal matrix for 3 and 5 wt.% propolis addition. Morphological results revealed that the diameters of the electrospun nanofiber patches were increased with GEL (from…
When does Wenzel's extension of Young's equation for the contact angle of droplets apply? A density functional study.
2020
he contact angle of a liquid droplet on a surface under partial wetting conditions differs for a nanoscopically rough or periodically corrugated surface from its value for a perfectly flat surface. Wenzel's relation attributes this difference simply to the geometric magnification of the surface area (by a factor $r_{\rm w}$), but the validity of this idea is controversial. We elucidate this problem by model calculations for a sinusoidal corrugation of the form $z_{\rm wall}(y) = \Delta\cos(2\pi y/\lambda)$ , for a potential of short range $\sigma_{\rm w}$ acting from the wall on the fluid particles. When the vapor phase is an ideal gas, the change of the wall-vapor surface tension can be co…
Monte Carlo Test of the Classical Theory for Heterogeneous Nucleation Barriers
2010
Flat walls facilitate the condensation of a supersaturated vapor: Classical theory of heterogeneous nucleation predicts that the free energy barrier $\Delta F_{\rm het}^*$ which needs to be overcome for the formation of sphere-cap shaped nucleation seeds is smaller than the barrier $\Delta F^*_{\rm hom}$ for spherical droplets in the bulk by a factor $0<f(\theta)<1$, which only depends on the contact angle $\theta$. In this letter we compute both $\Delta F^*_{\rm hom}$ and $\Delta F^*_{\rm het}$ from Monte Carlo simulations and test the theory for the lattice gas model (for which $\theta$ can be readily controlled). Even though the theory is only based on macroscopic arguments, it is shown …
Modification of carboxyl groups of poly(ethylene-co-acrylic acid) via facile wet chemistry method: A kinetic study
2010
Abstract In this work, we present the results of a kinetic study of the surface modification of the carboxyl group of poly(ethylene-co-acrylic acid) into acyl chloride. Reaction temperature and time, concentration of the reactants, kind of agitation have been changed in order to understand their effect on the conversion. A study on the penetration of the reaction inside the sample bulk was also performed. The results indicate that, when short reaction times are adopted, the reaction limits to the outer layers of the samples and, in this case, on increasing the temperature, the concentration of the reactants and the stirring allows having a faster kinetic. At longer reaction times, the react…