Search results for "Diode"
showing 10 items of 469 documents
Hybrid LEDs based on ZnO nanowire structures
2017
Abstract This paper summarized the research, development, and state of the art of hybrid ZnO nanowire LEDs, in which electroluminescence is generated at the junction between n-type doped ZnO nanowire structures and specific p-type doped polymers (in particular PEDOT, PEDOT:PSS, or PFO). Different device architectures will be reviewed and discussed with a particular emphasis on the electronic transport through the hybrid structures and the microscopic processes of light emission. Finally, a gas-phase deposition technique for conductive polymers will be presented which might help improve the performance of hybrid ZnO nanowire LEDs in the future.
The Role of Emission Layer Morphology on the Enhanced Performance of Light-Emitting Diodes Based on Quantum Dot-Semiconducting Polymer Hybrids
2016
The influence of the morphology of quantum dot (QD)-semiconducting polymer hybrid emission layers on the performance of quantum dot-based light emitting diodes (QLEDs) is systematically investigated. Chemically grafted QD-semiconducting polymer hybrids are fabricated by the ligand exchange procedure between CdSe/CdxZn1−xS QDs and a new block copolymer consisting of a carbazole-based electroactive block with a low highest occupied molecular orbital level and a disulfide-based anchor block. The performance of QLEDs with hybrid emission layers is compared with QLEDs utilizing QD-only and physically mixed QD/polymer emission layers. It is shown that only in the emission layers formed by chemica…
Mixed Iodide-Bromide Methylammonium Lead Perovskite-based Diodes for Light Emission and Photovoltaics.
2015
Vacuum deposition techniques are used to prepare mixed iodide–bromide methylammonium lead perovskite diodes via an intermediate double layer of the pure iodide and bromide perovskites. The diodes lead to bright electroluminescence, whose emission spectra maxima shift from the infrared toward the visible with increasing bromide content. When illuminated with AM1.5 simulated sunlight the devices function as efficient solar cells with power conversion efficiencies as high as 12.9%.
Combined thermal evaporated and solution processed organic light emitting diodes
2011
Abstract Highly efficient, partly solution processed phosphorescent red, green and white organic light emitting diodes with small molecular weight host materials are prepared from commercially available starting compounds. Starting from an evaporated reference device, layers are stepwise replaced by solution processed layers. Replacing the evaporated hole transport layer by a solution processed polymer interlayer does not affect the performance and allows spincoating of the emissive layer after annealing of the polymer. Devices with, next to the spincoated hole injection and transport layer, a solution processed emission layer show similar characteristics and efficiencies as the reference d…
A new cross-linkable 9,10-diphenylanthracene derivative as a wide bandgap host for solution-processed organic light-emitting diodes
2018
Efficient organic light-emitting diodes (OLEDs) can be obtained using multilayered architectures where the processes of charge injection, transport and recombination are separated and optimized in each layer. Processing these structures from solution requires strategies to avoid redissolution or damage of the previously deposited layers. Several reports have demonstrated the development of cross-linkable hole transport materials, while less literature describes the synthesis and applications of such wide bandgap host materials for multilayered OLEDs. In this work we introduce a cross-linkable derivative of 9-(4-(10-phenylanthracene-9-yl)phenyl)-9H-carbazole incorporating styrene moieties (S…
Effect of conductivity of hole injection layer on the performance of a blue light emitting solution processable OLED
2005
The performance of blue emitting OLED devices, using a polyspiro as blue light emitting polymer, were studied as a function of the conductivity of a novel hybrid hole injection material. The hole injection material is based on a polyarylamine using a molecular magnet as oxidant. The charge density and the luminance of the devices changed considerably with increasing conductivity of the hole injection layer. The change in device performance can be attributed to a change from a hole limited device to a balanced charge carrier device and eventually to an electron limited device. The performance of the optimized device configuration is significantly improved with respect to a device making use …
Efficient photovoltaic and electroluminescent perovskite devices.
2015
Planar diode structures employing hybrid organic–inorganic methylammonium lead iodide perovskites lead to multifunctional devices exhibiting both a high photovoltaic efficiency and good electroluminescence. The electroluminescence strongly improves at higher current density applied using a pulsed driving method.
Perimeter leakage current in polymer light emitting diodes
2009
Observation of leakage current paths through the device perimeter in standard poly(phenylene vinylene)-based light-emitting devices is reported. Perimeter leakage currents govern the diode performance in reverse and low positive bias and exhibit an ohmic character. Current density correlates with the perimeter-to-area ratio thus indicating that leakage currents are mainly confined on polymer regions in the vicinity of metallic contact limits (device perimeter). © 2008 Elsevier B.V. All rights reserved.
Ionically Assisted Charge Injection in Hybrid Organic−Inorganic Light-Emitting Diodes
2010
We have developed hybrid organic−inorganic light-emitting diodes (HyLEDs) featuring a buffer layer of a conjugated polyelectrolyte (CPE) sandwiched between a light emitting polymer (LEP) film and a ZnO electron injection layer. Efficacies exceeding 5 cd/A and the possibility of employing various LEPs are demonstrated. These improvements, compared to HyLEDs without any interlayer, are attributed to the redistribution of ions in the CPE film, causing hole accumulation at the CPE/LEP interfaces and enhanced electron injection from the ZnO into the electroluminescent polymer. The intrinsic air-stability of the electrodes used in HyLEDs, together with the solution processability of the ZnO/CPE/L…
Morphology control in biphasic hybrid systems of semiconducting materials.
2015
Simple blends of inorganic nanocrystals and organic (semiconducting) polymers usually lead to macroscopic segregation. Thus, such blends typically exhibit inferior properties than expected. To overcome the problem of segregation, polymer coated nanocrystals (nanocomposites) have been developed. Such nanocomposites are highly miscible within the polymer matrix. In this Review, a summary of synthetic approaches to achieve stable nanocomposites in a semiconducting polymer matrix is presented. Furthermore, a theoretical background as well as an overview concerning morphology control of inorganic NCs in polymer matrices are provided. In addition, the morphologic behavior of highly anisotropic na…