Search results for "Electron microscope"
showing 10 items of 784 documents
Flexible mats as promising antimicrobial systems via integration of Thymus capitatus (L.) essential oil into PLA
2020
Aim: To develop electrospun mats loaded with Thymus capitatus (L.) essential oil ( ThymEO) and to study their morpho-mechanical and antimicrobial properties. Materials & methods: Poly(lactic acid) (PLA) mats containing ThymEO were prepared by electrospinning. The effect of ThymEO on the morpho-mechanical properties of fibers was assayed by scanning electron microscopy and dynamometer measurements. The antimicrobial activity of ThymEO delivered either in liquid or vapor phase was assessed through killing curves and invert Petri dishes method. The cytotoxicity was also investigated. Results: The mechanical properties were enhanced by integrating ThymEO into PLA. Both liquid and vapors of…
Gelation behavior of 5-chloro-8-hydroxyquinoline, an antituberculosis agent, in aqueous alcohol solutions
2012
It was shown that 5-chloro-8-hydroxyquinoline, an antituberculosis agent, gels aqueous alcohol solutions efficiently. Thermal stability and gel-to-sol transition temperature of 1% gel in CD3OD/D2O (2:1) was studied by 1H-NMR. Fibrous structures of four xerogels have been characterized by scanning electron microscope. peerReviewed
Structural characterization of original 3D gallium structures grown by LP‐MOCVD
2004
This study is concerned with the growth and characterization of metallic gallium 3D structures, obtained with a single growth step, by the LP-MOCVD technique on various substrates. Commercial organo-metallic is used as gallium precursor and nitrogen as carrier gas. The growth temperature and the reactor pressure are ranking between 500 and 700 °C, and between 150 and 700 torr, respectively. Depending on the elaboration conditions, different 3D structures are obtained such as droplets, cauliflowers, aggregates or thin stems, with micrometer sizes. The morphology, substrate surface density and thermal stability are studied by optical and scanning electron microscopy. At last, X-ray microanaly…
Surface roughness, porosity, and texture as modifiers of cellular adhesion.
2009
Substrate topography in the micrometer range is reviewed as a modifier of the response of cultured cells and of biocompatibility when implanted into tissues. Characterization methods for substrate topography are discussed, including scanning electron microscopy, profilometry, laser scanning, and confocal microscopy. Because of the current technical limitations in reproducing micron-level topographic details, only one method, ion-beam etching, has been found suitable for texturing substrates on nonplanar surfaces.
Oil-Water Interface Templating of Mesoporous Macroscale Structures
1996
Ordered mesostructured porous silicas that are also macroscopically structured were created by control of the interface on two different length scales simultaneously. Micellar arrays controlled the nanometer-scale assembly, and at the static boundary between an aqueous phase and an organic phase, control was achieved on the micrometer to centimeter scale. Acid-prepared mesostructures of silica were made with the p6, Pm3n, and the P63/mmc structures in the form of porous fibers 50 to 1000 micrometers in length, hollow spheres with diameters of 1 to 100 micrometers, and thin sheets up to 10 centimeters in diameter and about 10 to 500 micrometers in thickness. These results might have implicat…
Bridgman growth of paratellurite single crystals
2004
Abstract The growth of paratellurite single crystals by the vertical-gradient freezing technique is reported for the first time. Boules of 120 mm long and 25 mm in diameter were obtained under a temperature gradient of 10°C cm −1 and translation rates lower than 0.6 mm h −1 . The spatial distribution of defects along the growth axis reveals a continuous evolution of the free convective fluid-flow regime as growth proceeds. Gas bubbles and dark inclusions rejected to the periphery in the upper part of the crystal are observed to lay preferentially in (1 0 0), (0 0 1), ( 1 1 ¯ 0 ) and (1 1 2) crystallographic planes. Among them, SEM and microprobe analyses evidenced the presence of metallic p…
Effects of an Er : YAG laser and the Vector® ultrasonic system on the biocompatibility of titanium implants in cultures of human osteoblast-like cells
2003
Abstract: The aim of the present study was to investigate the effects of an Er : YAG laser (ERL) and the Vector® ultrasonic system (VS) on the biocompatibility of titanium implants in cultures of human osteoblast-like cells (SAOS-2). One hundred and sixty-eight titanium discs with four different surfaces (sand-blasted and acid-etched, titanium plasma-sprayed, machine-polished, and hydroxyapatite-coated) were used to evaluate cell attachment. The samples were equally and randomly assigned to the following groups: (1) an ERL at an energy level of 100 mJ/pulse and 10 Hz using a special application tip, (2) the VS using carbon fibre tips, or (3) untreated control (C). The discs were placed in c…
Characterization of the nanocomposite laminate structure occurring in fish scales from Arapaima Gigas
2008
In the present paper, the nanocomposite laminate structure of scales from the Amazonian fish Arapaima Gigas is investigated. The structure and composition of the scales were assessed by means of X-ray diffraction (XRD) and Fourier Transform Infrared spectroscopy (FTIR). The theory of Fickian diffusion is used and discussed in order to rationalize the water absorption and desorption behavior of the scales. Morphology studies and fracture analysis of the native scales were carried out using Transmission Electron Microscopy (TEM), Light Optical Microscopy (LOM) and Scanning Electron Microscopy (SEM). A fibrous layer of collagen and a plywood-like structure were observed. In order to study the …
Effects of various hygiene procedures on the surface characteristics of titanium abutments.
1996
The use of cleaning instruments on titanium implants may cause undesired surface alterations. In a qualitative and quantitative assessment of these alterations, 5 titanium implant abutments were treated with a steel curet, a prototype pure titanium curet, an air abrasive polishing system, and an ultrasonic system. Custom-made polymer templates, used to secure the curet to a vertical guide bar and a spring scale to maintain a constant instrument pressure, guaranteed a standardized procedure and reproducible results. The ultrasonic and the air abrasive polishing method were also standardized. Evaluation by scanning electron microscopy (SEM) revealed surface alterations for all instruments and…
Electron Microscopy of Human Erythrocyte Catalase: New Two-Dimensional Crystal Forms
1993
Abstract Using the mica-spreading "negative staining-carbon film" procedure, human erythrocyte catalase has been shown to create a number of different periodic or crystalline two-dimensional (2-D) arrays which differ in the arrangement of molecules in the repeating units and the lattice type. Digital image processing has been performed with a 2-D array which contains regularly arranged "undulating" rows of molecules and also with a 2-D crystal form, exhibiting pgg (p22 1 2 1 ) symmetry and lattice parameters of a = 12.7 nm, b = 44 nm, and γ= 92°. The data are compared with our previous analysis of a different human erythrocyte catalase 2-D crystal, and the effect of partial-depth negative s…