Search results for "Energy engineering"

showing 10 items of 1099 documents

Comparison of Hybrid Blends for Solar Cell Application

2010

In blended hybrid systems distinct micro- or nanostructured materials can be formed by phase separation. Network structures of particles or rods in a polymer matrix can be developed via self-assembly. We use this blending approach to compare active materials for application in solar cell devices. Blends were fabricated from either poly(hexylthiophene) P3HT or poly(triphenylamine) PTPA mixed with nanocrystalline TiO 2 rods. In this manner, we compare two different hole conducting polymers in their performance in photovoltaic devices, while experimental conditions are kept identical. We find that the choice of solvent and photovoltaic characterization conducted in inert atmosphere is of impor…

Control and OptimizationMaterials scienceEnergy Engineering and Power TechnologyPTPATriphenylaminelcsh:TechnologyRodP3HTlaw.inventionjel:Q40chemistry.chemical_compoundlawjel:Qjel:Q43Solar celljel:Q42jel:Q41jel:Q48jel:Q47Electrical and Electronic EngineeringEngineering (miscellaneous)jel:Q49Conductive polymerchemistry.chemical_classificationhybrid solar celllcsh:TRenewable Energy Sustainability and the EnvironmentPhotovoltaic systemjel:Q0PolymerHybrid solar celljel:Q4Nanocrystalline materialhybrid solar cell; P3HT; PTPA; ambient conditionchemistryChemical engineeringambient conditionEnergy (miscellaneous)Energies
researchProduct

Conical Two-Phase Swirl Flow Atomizers—Numerical and Experimental Study

2021

This paper presents the results of numerical simulations for the developed and discussed conical two-phase atomizers with swirl flow, differing in the ratio of the height of the swirl chamber to its diameter. Experiments were carried out for SAN-1 with HS/DS = 1 and SAN-2 with HS/DS = 4 atomizers. The study was conducted over a range of Reynolds number for liquid ReL = (1400

Control and OptimizationMaterials scienceEulerian model020209 energyFlow (psychology)Energy Engineering and Power Technology02 engineering and technologyComputational fluid dynamics01 natural scienceslcsh:Technology010305 fluids & plasmasPhysics::Fluid Dynamicssymbols.namesakePhase (matter)0103 physical sciencesatomization0202 electrical engineering electronic engineering information engineeringFluid dynamicsElectrical and Electronic EngineeringEngineering (miscellaneous)conical swirl atomizerRenewable Energy Sustainability and the EnvironmentTurbulencebusiness.industrylcsh:TReynolds numberMechanicsConical surfaceVolumetric flow ratesymbolsbusinessCFDEnergy (miscellaneous)Energies
researchProduct

Eulerian two-fluid model of alkaline water electrolysis for hydrogen production

2020

Hydrogen storage is a promising technology for storage of renewable energy resources. Despite its high energy density potential, the development of hydrogen storage has been impeded, mainly due to its significant cost. Although its cost is governed mainly by electrical energy expense, especially for hydrogen produced with alkaline water electrolysis, it is also driven by the value of the cell tension. The most common means of electrolyzer improvement is the use of an electrocatalyst, which reduces the energy required for electrochemical reaction to take place. Another efficient means of electrolyzer improvement is to use the Computational Fluid Dynamics (CFD)-assisted design that allows the…

Control and OptimizationMaterials scienceHydrogen020209 energyNuclear engineeringBubbleEnergy Engineering and Power Technologychemistry.chemical_element02 engineering and technologylcsh:Technologylaw.inventionHydrogen storagelaw0202 electrical engineering electronic engineering information engineeringElectrical and Electronic EngineeringDiffusion (business)Engineering (miscellaneous)Hydrogen productionElectrolysislcsh:TRenewable Energy Sustainability and the EnvironmentElectric potential energyAlkaline water electrolysis021001 nanoscience & nanotechnologyTwo-phase processSettore ING-IND/23 - Chimica Fisica ApplicatachemistryHydrogen production0210 nano-technologyCFDTwo-phases flowAlkaline water electrolysishydrogen production; alkaline water electrolysis; two-phases flow; CFD; two-phase processEnergy (miscellaneous)
researchProduct

Nanostructured Ni Based Anode and Cathode for Alkaline Water Electrolyzers

2019

Owing to the progressive abandoning of the fossil fuels and the increase of atmospheric CO2 concentration, the use of renewable energies is strongly encouraged. The hydrogen economy provides a very interesting scenario. In fact, hydrogen is a valuable energy carrier and can act as a storage medium as well to balance the discontinuity of the renewable sources. In order to exploit the potential of hydrogen it must be made available in adequate quantities and at an affordable price. Both goals can be potentially achieved through the electrochemical water splitting, which is an environmentally friendly process as well as the electrons and water are the only reagents. However, these devices stil…

Control and OptimizationMaterials scienceNanostructureHydrogen020209 energyEnergy Engineering and Power Technologychemistry.chemical_elementNanotechnology02 engineering and technologyElectrocatalystElectrosynthesiselectrocatalystslcsh:Technologynickeliridium oxideHydrogen economySettore ING-IND/17 - Impianti Industriali Meccanicinanostructures0202 electrical engineering electronic engineering information engineeringalkaline electrolyzersElectrical and Electronic EngineeringEngineering (miscellaneous)Energy carrierRenewable Energy Sustainability and the Environmentbusiness.industrylcsh:TOxygen evolutionElectrocatalyst021001 nanoscience & nanotechnologypalladiumcobaltAnodeNanowireSettore ING-IND/23 - Chimica Fisica Applicatachemistrynanowiresni-alloyWater splitting0210 nano-technologybusinessAlkaline electrolyzerfoamEnergy (miscellaneous)Energies
researchProduct

The Membrane-Less Microbial Fuel Cell (ML-MFC) with Ni-Co and Cu-B Cathode Powered by the Process Wastewater from Yeast Production

2020

Research related to measurements of electricity production was combined with parallel wastewater parameter reduction in a membrane-less microbial fuel cell (ML-MFC) fed with industry process wastewater (from a yeast factory). Electrodes with Ni–Co and Cu–B catalysts were used as cathodes. A carbon electrode (carbon cloth) was used as a reference due to its widespread use. It was demonstrated that all analyzed electrodes could be employed as cathodes in ML-MFC fed with process wastewater from yeast production. Electricity measurements during ML-MFC operations indicated that power (6.19 mW) and current density (0.38 mA·cm−2) were the highest for Ni–Co electrodes. In addition, during the explo…

Control and OptimizationMicrobial fuel cellyeast wastewatermicrobial fuel cell; electricity production; oxygen electrode; Ni–Co cathode; Cu–B cathode; yeast wastewater; environmental engineeringEnergy Engineering and Power Technologychemistry.chemical_element02 engineering and technology010501 environmental sciences01 natural scienceslcsh:Technologylaw.inventionmicrobial fuel celllawElectrical and Electronic EngineeringEngineering (miscellaneous)Clark electrode0105 earth and related environmental sciencesenvironmental engineeringRenewable Energy Sustainability and the Environmentlcsh:TChemical oxygen demand021001 nanoscience & nanotechnologyPulp and paper industryCathodeCu–B cathodeWastewaterchemistryElectrodeoxygen electrodeelectricity productionAeration0210 nano-technologyNi–Co cathodeCarbonEnergy (miscellaneous)Energies
researchProduct

Improving angle stability by switching shunt reactors in mixed overhead cable lines. An Italian 400 kV case study

2019

Stringent environmental constraints make the construction of new transmission overhead lines more and more difficult. Alternatively, today it is possible to use cable lines for high (HV) and extra-high (EHV) voltage systems. The configuration of the so-called mixed lines can create some problems in the operation of the electrical system, both during steady-state and transient conditions. In particular, the system stability is one of the main concerns when analyzing the dynamic response of power systems. In this paper, the study of angular stability of a system containing a mixed line is presented: a specific control logic applied to the shunt reactors of the mixed line is proposed as improv…

Control and OptimizationMixed lineComputer scienceEnergy Engineering and Power Technologysystem stability; mixed line; cable; shunt reactor; switching; dynamic analysis; dynamic equivalent; Sicily; Italy; continental Europelcsh:TechnologyDynamic analysilaw.inventionElectric power systemSystem stabilitylawControl theoryElectrical and Electronic EngineeringControl logicEngineering (miscellaneous)SicilyDynamic equivalentlcsh:TRenewable Energy Sustainability and the EnvironmentContinental Europedynamic analysisSettore ING-IND/33 - Sistemi Elettrici Per L'EnergiaTransmission (mechanics)ItalyShunt reactorOverhead cableSwitchingShunt reactorShunt (electrical)Energy (miscellaneous)VoltageCable
researchProduct

Dynamic reconfiguration systems for PV plant: Technical and economic analysis

2020

Solar plants suffer of partial shading and mismatch problems. Without considering the generation of hot spots and the resulting security issues, a monitoring system for the health of a PV plant should be useful to drive a dynamic reconfiguration system (DRS) to solve bottlenecks due to different panels’ shading. Over the years different DRS architectures have been proposed, but no suggestions about costs and benefits have been provided. Starting from technical subjects such as differences of the topologies driving the hardware complexity and number of components, this paper identifies the cost of DRS and its lifetime, and based on these issues it provides an economic analysis for a 6 kWp PV…

Control and OptimizationMonitoringComputer science020209 energyEnergy Engineering and Power Technology02 engineering and technologySettore ING-IND/32 - Convertitori Macchine E Azionamenti ElettriciNetwork topologylcsh:TechnologySettore ING-INF/01 - Elettronica0202 electrical engineering electronic engineering information engineeringEconomic analysismedia_common.cataloged_instanceElectrical and Electronic EngineeringEuropean unionEngineering (miscellaneous)energy policies related to PV power plantsmedia_commonlcsh:TRenewable Energy Sustainability and the EnvironmentCase studieEnergy policies related to PV power plantmonitoring and case studiesEconomic analyseControl reconfiguration021001 nanoscience & nanotechnologyReliability engineeringSettore ING-IND/31 - Elettrotecnicaeconomic analysesenergy policies related to PV power plants; economic analyses; monitoring and case studiesShadingPv plant0210 nano-technologyEnergy (miscellaneous)Nominal power (photovoltaic)
researchProduct

An Environmental Analysis of the Effect of Energy Saving, Production and Recovery Measures on Water Supply Systems under Scarcity Conditions

2015

Water is one of the primary resources provided for maintaining quality of life and social status in urban areas. As potable water is considered to be a primary need, water service has usually been managed without examining the economic and environmental sustainability of supply processes. Currently, due to increases in energy costs and the growth of environment preservation policies, reducing water leakage, energy consumption and greenhouse gas (GHG) production have become primary objectives in reducing the environmental footprint of water service. The present paper suggests the implementation of some performance indicators that show the interdependence of water loss, energy consumption and…

Control and OptimizationNatural resource economicsleakageEnergy Engineering and Power TechnologyWater supplylcsh:Technologyjel:Q40Water conservationjel:Qjel:Q43jel:Q42jel:Q41jel:Q48jel:Q47Electrical and Electronic EngineeringEngineering (miscellaneous)jel:Q49Energy recoveryRenewable Energy Sustainability and the Environmentbusiness.industrylcsh:Twater supplyEnvironmental resource managementjel:Q0Energy consumptionperformance indicatorsjel:Q4Energy conservationGreenhouse gasSustainabilityEnvironmental sciencewater supply; energy; leakage; GHG; performance indicatorsGHGbusinessEnergy (miscellaneous)Efficient energy useenergyEnergies
researchProduct

A Simple Operating Strategy of Small-Scale Battery Energy Storages for Energy Arbitrage under Dynamic Pricing Tariffs

2015

Price arbitrage involves taking advantage of an electricity price difference, storing electricity during low-prices times, and selling it back to the grid during high-prices periods. This strategy can be exploited by customers in presence of dynamic pricing schemes, such as hourly electricity prices, where the customer electricity cost may vary at any hour of day, and power consumption can be managed in a more flexible and economical manner, taking advantage of the price differential. Instead of modifying their energy consumption, customers can install storage systems to reduce their electricity bill, shifting the energy consumption from on-peak to off-peak hours. This paper develops a deta…

Control and OptimizationOperations researchEnergy managementEnergy Engineering and Power Technologylcsh:TechnologyLoad profilePrice arbitrageMicroeconomicsEconomicsElectricity marketElectrical and Electronic EngineeringEngineering (miscellaneous)Hourly electricity pricelcsh:TRenewable Energy Sustainability and the Environmentbusiness.industryComputer Science (all)Energy managementEnergy consumptionOptimal operationRenewable energySettore ING-IND/33 - Sistemi Elettrici Per L'EnergiaStand-alone power systemhourly electricity pricesDynamic pricingprice arbitrage; battery energy storage system; optimal operation; hourly electricity prices; energy managementElectricitybusinessBattery energy storage systemEnergy (miscellaneous)Energies
researchProduct

Analysis of the Combustion Process in a Hydrogen-Fueled CFR Engine

2023

Green hydrogen, produced using renewable energy, is nowadays one of the most promising alternatives to fossil fuels for reducing pollutant emissions and in turn global warming. In particular, the use of hydrogen as fuel for internal combustion engines has been widely analyzed over the past few years. In this paper, the authors show the results of some experimental tests performed on a hydrogen-fueled CFR (Cooperative Fuel Research) engine, with particular reference to the combustion. Both the air/fuel (A/F) ratio and the engine compression ratio (CR) were varied in order to evaluate the influence of the two parameters on the combustion process. The combustion duration was divided in two par…

Control and OptimizationRenewable Energy Sustainability and the EnvironmentCFR engineEnergy Engineering and Power TechnologyBuilding and ConstructionElectrical and Electronic Engineeringknockingheat exchangesEngineering (miscellaneous)HydrogencombustionEnergy (miscellaneous)Energies
researchProduct