Search results for "Fourier Transform Infrared"
showing 10 items of 598 documents
Atomic layer deposition of polyimide thin films
2007
The atomic layer deposition (ALD) of different polyimide thin films has been studied. We have demonstrated self-limiting ALD deposition of PMDA–DAH, PMDA–EDA, PMDA–ODA and PMDA–PDA thin films at 160 °C. The maximum deposition rate of 5.8 A cycle−1 was obtained for the PMDA–DAH process. Although the deposition rate was high at 160 °C, a sudden decrease was observed when the temperature was increased. Regardless of the process studied, no film growth was obtained at 200 °C or above. Deposited polyimide films were analysed by FTIR, AFM and TOF-ERDA. According to the FTIR measurements, imide bonds were formed already in as-deposited films indicating polyimide formation without any additional th…
Cellulose‑copper as bio-supported recyclable catalyst for the clickable azide-alkyne [3 + 2] cycloaddition reaction in water.
2018
Abstract Naturally-occurring cellulose has been employed as a bio-support macromolecule for the immobilization of either copper(I) or copper(II) ions in order to click azide and alkyne derivatives in water. Under such a click regime, 1,4-disubstitued-1,2,3-triazoles were obtained regioselectively in excellent yields at room temperature. The reaction work-up is simple and the bio-heterogeneous catalyst that has been fully characterized by AAS, SEM, EDX and FT-IR can be easily separated and reused at least five times without any significant decrease in its activity and selectivity, particularly in the case of the very stable CuI-Cellulose.
Generic Method for Modular Surface Modification of Cellulosic Materials in Aqueous Medium by Sequential Click-Reaction and Adsorption
2012
A generic approach for heterogeneous surface modification of cellulosic materials in aqueous medium, applicable for a wide range of functionalizations, is presented. In the first step, carboxymethyl cellulose (CMC) modified with azide or alkyne functionality, was adsorbed on a cellulosic substrate, thus, providing reactive sites for azide–alkyne cycloaddition click reactions. In the second step, functional units with complementary click units were reacted on the cellulose surface, coated by the click-modified CMC. Selected model functionalizations on diverse cellulosic substrates are shown to demonstrate the generality of the approach. The concept by sequentially combining the robust physic…
A convenient route for the preparation of the monohydride catalyst trans-[RuCl(H)(dppe)2] (dppe=Ph2PCH2CH2PPh2): improved synthesis and crystal struc…
2013
Abstract A novel and improved room temperature synthesis of the monohydride catalyst trans-[RuCl(H)(dppe)2] complex (1, dppe (1,2-bis(diphenylphosphino)ethane) = Ph2PCH2CH2PPh2) proceeds through oxidation of methanol (the solvent) by the pentacoordinated cis-[RuCl(dppe)2][PF6] complex and t-BuOK as the base is described. Compound 1 was fully characterized by NMR (1H, 13C, 31P), ESI-MS(TOF +), FTIR and elemental analysis. The X-ray structure of 1 was reported for the first time and unambiguously confirms the trans-configuration of the complex.
Photocatalytic oxidation of gaseous toluene on polycrystalline TiO2: FT-IR investigation of surface reactivity of different types of catalysts
2000
Commercial TiO 2 Merck and TiO 2 Degussa P25 powders were employed as the catalysts for the photo-oxidation of toluene. By using TiO 2 Merck benzaldehyde was found in gas phase as the main product of the toluene partial oxidation. After an initial transient period, this catalyst exhibited a high stability in the presence of water vapour in the gaseous mixture, whereas the photoproduction of benzaldehyde sharply decreases after removal of H 2 O from the feed IR spectra of the used catalyst revealed that in the absence of water vapour benzaldehyde is molecularly held on the catalyst surface. This feature was confirmed by co-adsorbing benzaldehyde and water on the fresh catalyst. By contrast, …
Synthesis and characterisation of N-glycosyl amines from the reaction between 4,6-O-benzylidene-D-glucopyranose and substituted aromatic amines and a…
2001
Twelve N-glycosyl amines were synthesised using 4,6-O–benzylidene-D-glucopyranose and different substituted aromatic amines, including some diamines that resulted in bis-glycosyl amines. Another set of six N–glycosyl amines was synthesised using different hexoses and pentoses and 2–(o–aminophenyl)benzimidazole. All compounds were isolated as solid products and purified, their elemental compositions were established, and these were characterised by NMR (1H and 13C), UV–Vis, and FTIR spectroscopy, by FAB mass spectrometry (molecular-ion peaks gave molecular weights), and by their optical rotations. While the protected saccharide, 4,6-O-benzylidene-D-glucopyranose, exists as a mixture of β and…
Lactobacillus acidophilus La5 and Bifidobacterium lactis Bb12 cell surface hydrophobicity and survival of the cells under adverse environmental condi…
2012
Abstract Changes in the cell surface hydrophobicity (CSH) of probiotic bacteria Lactobacillus acidophilus La5 and Bifidobacterium lactis Bb12 and the survival of these cells were examined in response to varied cultivation conditions and adverse environmental conditions. An inverse linear relationship (P < 0.01) was detected between the CSH of intact L. acidophilus La5 and B. lactis Bb12 and survival of cells subjected to subsequent freezing/thawing, long-term storage or exposure to mineral and bile acids. The observed relationships were supported by significant correlations between the CSH and changes in composition of the cell envelopes (proteins, lipids and carbohydrates) of L. aci…
Solid state structural studies of five bile acid derivatives
2008
Five synthetically important bile acid derivatives have been characterized by 13 C CP-MAS, X-ray diffraction (both single crystal and powder), FTIR, and thermoanalytical (DSC and TG) methods. The crystallinity of all these derivatives is high, which can be deducted from the 13 C CP-MAS and powder X-ray diffraction data. Two of the compounds showed polymorphism, and one polymorph was structurally elucidated for both by comparing single crystal and powder X-ray diffraction data.
Film-forming process and biocide assessment of high-molecular-weight chitosan as determined by combined ATR-FTIR spectroscopy and antimicrobial assay…
2006
This pioneering study reported about the film-forming properties of high-molecular-weight chitosan as followed in situ by attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, and has implications in fields such as biomedical, pharmaceutical, packaging, and coating applications. From the results, it was observed that immediately after dissolution in an acetic acid aqueous solution and subsequent casting over the ATR crystal, the formed carboxylate antimicrobial (-NH3+ -OOCH) species are not stable in the film formulation and become reduced over time; further assays confirmed previous research, which suggested that the presence and stability of these groups is stron…
Design, characterization and in vitro evaluation of 5-aminosalicylic acid loaded N-succinyl-chitosan microparticles for colon specific delivery
2011
The objective of this study was to prepare NS-chitosan microparticles for the delivery of 5-aminosalicylic acid (5-ASA) to the colon. Microparticles can spread out over a large area of colon allowing a more effective local efficacy of 5-ASA. N-Succinyl-chitosan was chosen as carrier system because of its excellent pharmaceutical properties in colon drug targeting such as poor solubility in acid environment, biocompatibility, mucoadhesive properties, and low toxicity. It was prepared by introducing succinic group into chitosan N-terminals of the glucosamine units. 5-ASA loaded NS-chitosan microparticles were prepared using spray-drying. As a control, a matrix obtained by freeze-drying techni…