Search results for "Full width at half maximum"

showing 10 items of 89 documents

Absolute crystallinity and photocatalytic activity of brookite TiO2 samples

2017

Abstract This study reports a method to determine the absolute crystallinity of partly crystalline brookite TiO2 photocatalysts. A natural, a commercial and various home-prepared brookite powders were characterized by X-ray diffraction analysis, Raman spectroscopy, scanning electron microscopy, UV–vis diffuse reflectance spectroscopy and nitrogen adsorption measurements. The absolute crystallinity was calculated from the ratio between the full width at half maximum intensity of the (121) X-ray diffraction peaks of the brookite samples and the (111) peak of CaF2 as internal standard. The photocatalytic activity of the powders was tested employing the photodegradation of 4-nitrophenol as well…

Materials scienceDiffuse reflectance infrared fourier transformScanning electron microscopeInorganic chemistry02 engineering and technology010402 general chemistry01 natural sciencesCatalysisCrystallinitysymbols.namesakePhotocatalysiBrookitePhotodegradationCrystallinityGeneral Environmental ScienceBrookiteProcess Chemistry and Technology021001 nanoscience & nanotechnology0104 chemical sciencesFull width at half maximumSettore ING-IND/22 - Scienza E Tecnologia Dei Materialivisual_artPhotocatalysisvisual_art.visual_art_mediumsymbolsCalcinationSettore CHIM/07 - Fondamenti Chimici Delle Tecnologie0210 nano-technologyRaman spectroscopyNuclear chemistry
researchProduct

Fabrication of long period fiber gratings of subnanometric bandwidth.

2017

This paper reports on the fabrication of long period fiber gratings having subnanometric bandwidth in the 1500 nm spectral region. Large gratings have been photo-inscribed in a high NA fiber, the grating pitch and the order of the HE cladding mode are optimized to produce gratings with a large number of periods and preventing the coupling to TE, TM or EH modes. Resonances with a FWHM of 0.83 nm and 0.68 nm have been achieved for gratings 15 and 20 cm long respectively, the free spectral range between transmission notches is 125 nm. The polarization effects and the sensitivity of the gratings to temperature and to strain variations are presented as well. © 2015 Optical Society of America Thi…

Materials scienceFabrication02 engineering and technologyGratingFiber optics01 natural sciencesMultiplexing010309 optics020210 optoelectronics & photonicsOptics0103 physical sciences0202 electrical engineering electronic engineering information engineeringFiber Bragg gratingsbusiness.industryFiber optics sensorsResonanceCladding modePolarization (waves)Atomic and Molecular Physics and OpticsUNESCO::FÍSICA::Óptica ::Fibras ópticasFull width at half maximum:FÍSICA::Óptica ::Fibras ópticas [UNESCO]Fourier optics and signal processingbusinessRefractive indexFree spectral rangeOptics letters
researchProduct

Optical absorption and electron paramagnetic resonance of theEα′center in amorphous silicon dioxide

2008

We report a combined study by optical absorption (OA) and electron paramagnetic resonance (EPR) spectroscopy on the E{sub {alpha}}{sup '} point defect in amorphous silicon dioxide (a-SiO{sub 2}). This defect has been studied in {beta}-ray irradiated and thermally treated oxygen-deficient a-SiO{sub 2} materials. Our results have pointed out that the E{sub {alpha}}{sup '} center is responsible for an OA Gaussian band peaked at {approx}5.8 eV and having a full width at half maximum of {approx}0.6 eV. The estimated oscillator strength of the related electronic transition is {approx}0.14. Furthermore, we have found that this OA band is quite similar to that of the E{sub {gamma}}{sup '} center in…

Materials scienceOscillator strengthCenter (category theory)Condensed Matter PhysicsCrystallographic defectMolecular electronic transitionElectronic Optical and Magnetic Materialslaw.inventionFull width at half maximumParamagnetismCrystallographylawAbsorption (logic)Atomic physicsElectron paramagnetic resonancePhysical Review B
researchProduct

The controlled growth of GaN microrods on Si(111) substrates by MOCVD

2015

Abstract In this paper, a selective area growth (SAG) approach for growing GaN microrods on patterned SiN x /Si(111) substrates by metal-organic chemical vapor deposition (MOCVD) is studied. The surface morphology, optical and structural properties of vertical GaN microrods terminated by pyramidal shaped facets (six { 10 1 ¯ 1 } planes) were characterized using scanning electron microscopy (SEM), room temperature photoluminescence (PL) and Raman spectroscopy, respectively. Measurements revealed high-quality GaN microcolumns grown with silane support. Characterized structures were grown nearly strain-free (central frequency of Raman peak of 567±1 cm −1 ) with crystal quality comparable to bu…

Materials sciencePhotoluminescenceScanning electron microscopebusiness.industryNanotechnologyChemical vapor depositionCondensed Matter PhysicsSilaneInorganic ChemistryCrystalFull width at half maximumsymbols.namesakechemistry.chemical_compoundchemistryMaterials ChemistrysymbolsOptoelectronicsMetalorganic vapour phase epitaxybusinessRaman spectroscopyJournal of Crystal Growth
researchProduct

Optical, structural, and morphological characterisation of epitaxial ZnO films grown by pulsed-laser deposition

2013

We report on ZnO epitaxial growth by pulsed-laser deposition (PLD) on different substrates, such as quartz, sapphire, and GaN template. Approximately 1 mu m-thick films were grown under different substrate temperatures and background oxygen conditions. X-ray diffraction analysis indicated preferential growth along the c-axis direction with a full-width at half maximum(FWHM) of the rocking curve as narrow as 230 arcs in the case of the GaN template. Low-temperature photoluminescence showed A-excitonic emission near 3.36 eV and a FWHM of (DXA)-X-0 emission as small as 2.89 meV at 9 K. Atomic force microscope measurements showed that roughness as low as 18 nm could be obtained. These results p…

Materials sciencePhotoluminescenceStructural propertiesbusiness.industryMetals and AlloysPulsed laser depositionSurfaces and InterfacesSubstrate (electronics)EpitaxySettore ING-INF/01 - ElettronicaSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsPulsed laser depositionFull width at half maximumCrystallinityOpticsSurface roughnessZinc oxidePulsed laser deposition Zinc oxide Photoluminescence Structural properties Surface roughness.Materials ChemistrySapphireOptoelectronicsLuminescencebusinessPhotoluminescence
researchProduct

Vacuum ultraviolet excitation of the 1.9-eV emission band related to nonbridging oxygen hole centers in silica

2004

Physical review / B 69, 153201 (2004). doi:10.1103/PhysRevB.69.153201

Materials scienceRelaxation (NMR)Center (category theory)Astrophysics::Cosmology and Extragalactic AstrophysicsAtmospheric temperature rangeCondensed Matter Physicsmedicine.disease_cause530Electronic Optical and Magnetic MaterialsFull width at half maximumExcited statemedicineAstrophysics::Solar and Stellar Astrophysicsddc:530Atomic physicsLuminescenceExcitationUltravioletPhysical Review B
researchProduct

Focusing of surface-acoustic-wave fields on (100) GaAs surfaces

2003

Focused surface-acoustic waves (SAWs) provide a way to reach intense acoustic fields for electro- and optoacoustic applications on semiconductors. We have investigated the focusing of SAWs by interdigital transducers (IDTs) deposited on (100)-oriented GaAs substrates. The focusing IDTs have curved fingers designed to account for the acoustic anisotropy of the substrate. Different factors that affect focusing, such as the aperture angle and the configuration of the IDT fingers, were systematically addressed. We show that the focusing performance can be considerably improved by appropriate choice of the IDT metal pads, which, under appropriate conditions, create an acoustic waveguide within t…

Materials sciencebusiness.industrySurface acoustic waveFísicaGeneral Physics and AstronomySubstrate (electronics)Ciència dels materialsCollimated lightFull width at half maximumOpticsSemiconductorTransducerVertical displacementbusinessAnisotropyJournal of Applied Physics
researchProduct

Optimization of dual-core and microstructure fiber geometries for dispersion compensation and large mode area

2009

We investigate dual concentric core and microstructure fiber geometries for dispersion compensation. Dispersion values as large as -59 000 ps/(nm km) are achieved, over a broad wavelength range with full width at half maximum exceeding 100 nm. The trade-off between large dispersion and mode area is studied. Geometries with an effective mode area of 30 microm2 and dispersion -19 000 ps/(nm km) and 80 microm2 with -1600 ps/(nm km) are proposed.

Mode volumeMaterials scienceOptical fiberbusiness.industryGraded-index fiberAtomic and Molecular Physics and Opticslaw.inventionCore (optical fiber)Full width at half maximumOpticslawDispersion (optics)Dispersion-shifted fiberbusinessPhotonic-crystal fiberOptics Express
researchProduct

Nuclear physics with ion traps at ISOLDE: present and future

1993

Nuclear physics experiments with ion traps started at the on-line separator ISOLDE/CERN, Geneva, with the installation of the tandem Penning trap mass spectrometer ISOLTRAP. With this device the massM of a stored ion is determined by measuring its cyclotron frequency θc=(q/M)B in a magnetic fieldB. Mass measurements with a resolving powerR=θc/Δθc(FWHM)≈1×106 and accuracies of δM/M≈10−7 were performed on more than sixty unstable isotopes of the elements Rb, Sr, Cs, Ba, Fr, and Ra.

Nuclear and High Energy PhysicsLarge Hadron ColliderIsotopeChemistryCyclotronCondensed Matter PhysicsPenning trapMass spectrometryISOLTRAPAtomic and Molecular Physics and Opticslaw.inventionIonNuclear physicsFull width at half maximumlawPhysical and Theoretical ChemistryAtomic physicsHyperfine Interactions
researchProduct

Recent advances in the development of high-resolution 3D cadmium-zinc-telluride drift strip detectors.

2020

In the last two decades, great efforts have been made in the development of 3D cadmium–zinc–telluride (CZT) detectors operating at room temperature for gamma-ray spectroscopic imaging. This work presents the spectroscopic performance of new high-resolution CZT drift strip detectors, recently developed at IMEM-CNR of Parma (Italy) in collaboration with due2lab (Italy). The detectors (19.4 mm × 19.4 mm × 6 mm) are organized into collecting anode strips (pitch of 1.6 mm) and drift strips (pitch of 0.4 mm) which are negatively biased to optimize electron charge collection. The cathode is divided into strips orthogonal to the anode strips with a pitch of 2 mm. Dedicated pulse processing analysis…

Nuclear and High Energy PhysicsMaterials sciencePhysics::Instrumentation and Detectors030303 biophysics3D CdZnTe detectorsSTRIPS01 natural sciencesElectric chargelaw.invention03 medical and health scienceschemistry.chemical_compounddrift strip detectorslaw0103 physical sciencesInstrumentation0303 health sciencesRadiation010308 nuclear & particles physicsbusiness.industryDetectorElectrostatic inductionSettore FIS/07 - Fisica Applicata(Beni Culturali Ambientali Biol.e Medicin)CathodeCadmium zinc tellurideAnodeFull width at half maximumX-ray and gamma-ray detectorschemistryX-ray and gamma-ray detectors; 3D CdZnTe detectors; drift strip detectors; spectroscopic X-ray and gamma-ray imagingOptoelectronicsbusinessspectroscopic X-ray and gamma-ray imagingJournal of synchrotron radiation
researchProduct