Search results for "Halide"
showing 10 items of 324 documents
Humidity-Induced Grain Boundaries in MAPbI3 Perovskite Films
2016
Methylammonium lead halide perovskites (MAPbI3) are very sensitive to humid environments. We performed in situ scanning force microscopy and in situ X-ray diffraction measurements on MAPbI3 films to track changes in the film morphology and crystal structure upon repeated exposure to a high relative humidity environment (80%). We found that the appearance of monohydrate (MAPbI3·H2O) Bragg reflections coincided with the appearance of additional grain boundaries. Prolonging the exposure time to humidity induced more grain boundaries and steps in the MAPbI3 films, and the peak intensities of the monohydrate MAPbI3·H2O increased. The monohydrate was not stable under dry atmosphere and could be r…
Dual-source vacuum deposition of pure and mixed halide 2D perovskites: thin film characterization and processing guidelines
2020
The dual-source vacuum deposition of 2D perovskite films of the type PEA2PbX4, (PEA = phenethylammonium and X = I−, Br−, or a combination of both) is presented. Low-temperature deposited 2D perovskite films showed high crystallinity with the expected trend of bandgap as a function of halide type and concentration. Importantly, we observed an unavoidable halide cross-contamination among different deposition runs, as well as a strong dependence of the material quality on the type of halide precursors used. These findings should be taken into account in the development of vacuum processing for low-dimensional mixed halide perovskites.
Effect of the precursor's stoichiometry on the optoelectronic properties of methylammonium lead bromide perovskites
2017
International audience; Methylammonium lead bromide (MAPbBr 3) perovskites have been widely studied in applications such as lasers and light-emitting diodes, thanks to their favorable bandgap, efficient charge transport, and the possibility of processing by simple solution methods. The film morphology has a large impact on the optical and electronic properties of the material; hence the deposition methods and the type of precursors used are crucial in the preparation of efficient optoelectronic devices. Here we studied the effect of the precursor´s stoichiometry of solution processed MAPbBr 3 thin films on their optical and electronic properties. We found a drastic effect of the stoichiomet…
Efficient Wide-Bandgap Mixed-Cation and Mixed-Halide Perovskite Solar Cells by Vacuum Deposition
2021
Vacuum deposition methods are increasingly applied to the preparation of perovskite films and devices, in view of the possibility to prepare multilayer structures at low temperature. Vacuum-deposited, wide-bandgap solar cells based on mixed-cation and mixed-anion perovskites have been scarcely reported, due to the challenges associated with the multiple-source processing of perovskite thin films. In this work, we describe a four-source vacuum deposition process to prepare wide-bandgap perovskites of the type FA1-n Cs n Pb(I1-x Br x )3 with a tunable bandgap and controlled morphology, using FAI, CsI, PbI2, and PbBr2 as the precursors. The simultaneous sublimation of PbI2 and PbBr2 allows the…
Vacuum-Deposited Multication Tin-Lead Perovskite Solar Cells
2020
The use of a combination of tin and lead is the most promising approach to fabricate narrow bandgap metal halide perovskites. This work presents the development of reproducible tin and lead perovskites by vacuum co-deposition of the precursors, a solvent-free technique which can be easily implemented to form complex stacks. Crystallographic and optical characterization reveal the optimal film composition based on cesium and methylammonium monovalent cations. Device optimization makes use of the intrinsically additive nature of vacuum deposition, resulting in solar cells with 8.89% photovoltaic efficiency. The study of the devices by impedance spectroscopy identifies bulk recombination as on…
First-principles calculations of iodine-related point defects in CsPbI3
2019
Many thanks to A. Lushchik, A. Popov and R. Merkle for numerous fruitful discussions. This study was partly supported by the Latvian Council for Science (grant LZP-2018/1-0147 to EK). R.A.E acknowledges the assistance of the University Computer Center of Saint-Petersburg State University for high-performance computations.
Efficient Perovskite Light-Emitting Diodes: Effect of Composition, Morphology, and Transport Layers
2018
Organic-inorganic metal halide perovskites are emerging as novel materials for light-emitting applications due to their high color purity, band gap tunability, straightforward synthesis, and inexpensive precursors. In this work, we improve the performance of three-dimensional perovskite light-emitting diodes (PeLEDs) by tuning the emissive layer composition and thickness and by using small-molecule transport layers. Additionally, we correlate PeLED efficiencies to the perovskite structure and morphology. The results show that the PeLEDs containing perovskites with an excess of methylammonium bromide (MABr) to lead bromide (PbBr2) in a 2:1 ratio and a layer thickness of 80 nm have the highes…
Understanding the optical and bonding properties of hybrid metal-halide (C5H16NP) PbX4 (X = Cl, Br, I) perovskite: A density-functional theory study
2021
Abstract Hybrid perovskites have demonstrated high stability and a promising optoelectronic performance for solar-cells. The quest over their functionalities beyond photo-voltaic applications is currently an important challenge. In this work, we have used density-functional theory to study hybrid perovskites. In particular, we have explored how atomic substitution could be used to design their optoelectronic properties. Under this approach, we have investigated the effect of changing the halogen atom (X = Cl, Br, I) on the structural, electronic, and optical properties of (C5H16NP) PbX4 hybrid perovskites. The electronic properties have been computed using hybrid functionals including the …
Optical and Vibrational Spectra of CsCl-Enriched GeS2-Ga2S3 Glasses
2016
Optical and FTIR spectroscopy was employed to study the properties of 80GeS2-20Ga2S3-CsCl chalcohalide glasses with CsCl additives in a temperature range of 77–293 K. It is shown that CsCl content results in the shift of fundamental absorption edge in the visible region. Vibrational bands in FTIR spectra of (80GeS2-20Ga2S3)100 − х (СsCl) x (x = 5, 10, and 15) are identified near 2500 cm−1, 3700 cm−1,, around 1580 cm−1, and a feature at 1100 cm−1. Low energy shifts of vibrational frequencies in glasses with a higher amount of CsCl can be caused by possible thermal expansion of the lattice and nanovoid agglomeration formed by CsCl additives in the inner structure of the Ge-Ga-S glass.