Search results for "Iode"
showing 10 items of 1284 documents
Biodegradable Polymers for the Production of Nets for Agricultural Product Packaging
2021
It is well known that the need for more environmentally friendly materials concerns, among other fields, the food packaging industry. This regards also, for instance, nets used for agricultural product (e.g., citrus fruits, potatoes) packaging. These nets are typically manufactured by film blowing technique, with subsequent slicing of the films and cold drawing of the obtained strips, made from traditional, non-biodegradable polymer systems. In this work, two biodegradable polymer systems were characterized from rheological, processability, and mechanical points of view, in order to evaluate their suitability to replace polyethylene-based polymer systems typically used for agricultural prod…
Effect of cold drawing on mechanical properties of biodegradable fibers.
2016
Purpose Biodegradable polymers are currently gaining importance in several fields, because they allow mitigation of the impact on the environment related to disposal of traditional, nonbiodegradable polymers, as well as reducing the utilization of oil-based sources (when they also come from renewable resources). Fibers made of biodegradable polymers are of particular interest, though, it is not easy to obtain polymer fibers with suitable mechanical properties and to tailor these to the specific application. The main ways to tailor the mechanical properties of a given biodegradable polymer fiber are based on crystallinity and orientation control. However, crystallinity can only marginally be…
Millisecond radiative recombination in poly(phenylene vinylene)-based light-emitting diodes from transient electroluminescence
2007
The current and electroluminescence transient responses of standard poly phenylene vinylene -based light-emitting devices have been investigated. The electroluminescence time response is longer milliseconds scale than the current switch-off time by more than one order of magnitude, in the case of small area devices 0.1 cm2 . For large area devices 6 cm2 the electroluminescence decay time decreases from 1.45 ms to 100 s with increasing bias voltage. The fast current decay limits the electroluminescence decay at higher voltages. Several approaches are discussed to interpret the observed slow decrease of electroluminescence after turning off the bias. One relies upon the Langevin-type bimolecu…
Preparation, characterization and in vitro antimicrobial activity of ampicillin-loaded polyethylcyanoacrylate nanoparticles.
1998
In this paper, the experimental conditions for preparing ampicillin-loaded polyethylcyanoacrylate (PECA) nanoparticles are described. The effects of drug concentration and surfactant type in the polymerization medium on the particle size distribution and loading capacity were studied. The results of these studies show that only the type of surfactant has an impact on the nanoparticle dimensions. The release rate of ampicillin from PECA nanoparticles at pH 7.4 (extracellular value pH) performed either with and without esterases, show that the drug release is considerably increased in the presence of these exzymes. The results of drug release study at pH 1.1 (simulated gastric juice) are very…
Progress in Violet Light-Emitting Diodes Based on ZnO/GaN Heterojunction
2020
Progress in light-emitting diodes (LEDs) based on ZnO/GaN heterojunctions has run into several obstacles during the last twenty years. While both the energy bandgap and lattice parameter of the two semiconductors are favorable to the development of such devices, other features related to the electrical and structural properties of the GaN layer prevent an efficient radiative recombination. This work illustrates some advances made on ZnO/GaN-based LEDs, by using high-thickness GaN layers for the p-region of the device and an ad hoc device topology. Heterojunction LEDs consist of a quasicoalesced non-intentionally doped ZnO nanorod layer deposited by chemical bath deposition onto a metal&ndash
Capacitance-voltage characteristics of organic light-emitting diodes varying the cathode metal: Implications for interfacial states
2007
Capacitance-voltage $(C\text{\ensuremath{-}}V)$ characteristics of organic light-emitting diodes based on a polyphenylenevinylene have been measured by means of impedance spectroscopy. The effect of the metallic cathode (Au, Ag, Al, Mg, and Ba) was analyzed in the low-frequency region $(2\phantom{\rule{0.3em}{0ex}}\mathrm{Hz})$ of the capacitive response. The $C\text{\ensuremath{-}}V$ curves collapse into a single pattern in the low bias region, and exhibit a dependence on the cathode work function showing a crossover from positive to negative (inductive) values. The voltage corresponding to the onset of the inductive behavior shifts toward higher bias as the cathode work function increases…
<title>Changes in the temperature dependence of the dielectric constant in irradiated antiferroelectric thin films</title>
2003
A model describing the changes of the Curie-Weiss temperature in lead-zirconate thin films under neutron irradiation is proposed. The Curie-Weiss temperature in the irradiated material decreases which is connected to charges caused by neutron irradiation. The charges located near the surfaces due to Schottky effect and in the bulk of the film results in different rates of the Curie-Weiss temperature decreases with neutron fluence. However the influence of the Schottky layers seems to be more pronounced. Satisfactory agreement between the theoretical results and the experimental data is obtained for different neutron fluences.© (2003) COPYRIGHT SPIE--The International Society for Optical Eng…
High voltage vacuum-processed perovskite solar cells with organic semiconducting interlayers
2020
In perovskite solar cells, the choice of appropriate transport layers and electrodes is of great importance to guarantee efficient charge transport and collection, minimizing recombination losses. The possibility to sequentially process multiple layers by vacuum methods offers a tool to explore the effects of different materials and their combinations on the performance of optoelectronic devices. In this work, the effect of introducing interlayers and altering the electrode work function has been evaluated in fully vacuum-deposited perovskite solar cells. We compared the performance of solar cells employing common electron buffer layers such as bathocuproine (BCP), with other injection mate…
Cytotoxicity of Metal and Semiconductor Nanoparticles Indicated by Cellular Micromotility
2009
In the growing field of nanotechnology, there is an urgent need to sensitively determine the toxicity of nanoparticles since many technical and medical applications are based on controlled exposure to particles, that is, as contrast agents or for drug delivery. Before the in vivo implementation, in vitro cell experiments are required to achieve a detailed knowledge of toxicity and biodegradation as a function of the nanoparticles' physical and chemical properties. In this study, we show that the micromotility of animal cells as monitored by electrical cell-substrate impedance analysis (ECIS) is highly suitable to quantify in vitro cytotoxicity of semiconductor quantum dots and gold nanorods…
Design and realization of a portable multichannel continuous wave fNIRS
2014
A design and implementation of a portable functional Near InfraRed Spectroscopy embedded system prototype is described. In this theoretical and experimental work, we present an embedded system hosting 64 LED sources and 128 Silicon PhotoMultiplier detectors (SiPM). The elementary part of the structure is a flexible probe “leaf” consisting of 16 SiPMs, 4 couples of LEDs, each operating at two wavelengths, and a temperature sensor. The hardware system is based on an ARM main microcontroller that allows to perform both the switching time of LEDs and the acquisition of the SiPM outputs. The performed preliminary experimental tests achieved very promising results, thus demonstrating the effectiv…