Search results for "L-ASPARTAMIDE"
showing 10 items of 34 documents
Pegylated nanoparticles based on a polyaspartamide. Preparation, physico-chemical characterization and intracellular uptake
2006
Nanoparticles with different surface PEGylation degree were prepared by using as starting material alpha,beta-poly(N-2-hydroxyethyl)-d,l-aspartamide (PHEA). PHEA was functionalized with a PEG amino-derivative for obtaining PHEA-PEG(2000) copolymer. Both PHEA and PHEA-PEG(2000) were derivatized with methacrylic anhydride (MA) for obtaining poly(hydroxyethylaspartamide methacrylated) (PHM) and poly(hydroxyethylaspartamide methacrylated)-PEGylated (PHM-PEG(2000)), respectively. Nanoparticles were obtained by UV irradiation of an inverse microemulsion, using as internal phase an aqueous solution of PHM alone or of the PHM/PHM-PEG(2000) mixture at different weight ratio and as external phase a m…
SYNTHESIS, PHYSICO-CHEMICAL AND BIOLOGICAL CHARACTERIZATION OF A PACLITAXEL MACROMOLECULAR PRODRUG
2004
Paclitaxel was attached to poly(hydroxyethylaspartamide) via a succinic spacer arm by a two-step protocol: (1) synthesis of 2'-O-succinyl-paclitaxel; (2) synthesis of PHEA-2'-O-succinyl-paclitaxel. The 2'-O-succinyl-paclitaxel derivative and the macromolecular conjugate were characterized by UV, IR, NMR and mass spectrometry analysis. The reaction yields were over 95% and the purity of products over 98%. Paclitaxel release and degradation from 2'-O-succinyl-paclitaxel occurred at a faster rate at pH 5.5 than 7.4. After 30 h of incubation at pH 5.5 and 7.4 the released free paclitaxel was about 40 and 20%, respectively. In plasma both drug release and degradation were found to occur at a hig…
NANOPARTICLES BASED ON NOVEL AMPHIPHILIC POLYASPARTAMIDE COPOLYMERS
2010
In this article, the synthesis of two amphiphilic polyaspartamide copolymers, useful to obtain polymeric nanoparticles without using surfactants or stabilizing agents, is described. These copolymers were obtained starting from α,β-poly-(N-2-hydroxyethyl)-dl-aspartamide (PHEA) by following a novel synthetic strategy. In particular, PHEA and its pegylated derivative (PHEA-PEG2000) were functionalized with poly(lactic acid) (PLA) through 1,1′-carbonyldiimidazole (CDI) activation to obtain PHEA–PLA and PHEA-PEG2000–PLA graft copolymers, respectively. These copolymers were properly purified and characterized by 1H-NMR, FT-IR, and Size Exclusion Chromatography (SEC) analyses, which confirmed that…
Mucus and Cell-Penetrating Nanoparticles Embedded in Nano-into-Micro Formulations for Pulmonary Delivery of Ivacaftor in Patients with Cystic Fibrosis
2017
Here, mucus-penetrating nanoparticles (NPs) for pulmonary administration of ivacaftor in patients with cystic fibrosis (CF) were produced with the dual aim of enhancing ivacaftor delivery to the airway epithelial cells, by rapid diffusion through the mucus barrier, and at the same time, promoting ivacaftor lung cellular uptake. Pegylated and Tat-decorated fluorescent nanoparticles (FNPs) were produced by nanoprecipitation, starting from two synthetic copolymers, and showed nanometric sizes (∼70 nm), a slightly negative ζ potential, and high cytocompatibility toward human bronchial epithelium cells. After having showed the significant presence of poly(ethylene glycol) chains and Tat protein …
Polyaspartamide-based nanoparticles loaded with fluticasone propionate and the in vitro evaluation towards cigarette smoke effects
2017
This paper describes the evaluation of polymeric nanoparticles (NPs) as a potential carrier for lung administration of fluticasone propionate (FP). The chosen polymeric material to produce NPs was a copolymer based on α,β-poly(N-2-hydroxyethyl)-d,l-aspartamide (PHEA) whose backbone was derivatised with different molecules, such as poly(lactic acid) (PLA) and polyethylenglycol (PEG). The chosen method to produce NPs from PHEA-PLA-PEG2000 was the method based on high-pressure homogenization and subsequent solvent evaporation by adding Pluronic F68 during the process and trehalose before lyophilisation. Obtained colloidal FP-loaded NPs showed a slightly negative surface charge and nanometric d…
Evaluation of biodegradability on polyaspartamide-polylactic acid based nanoparticles by chemical hydrolysis studies
2015
Here, the synthesis of two graft copolymers based on ?,?-poly(N-2-hydroxyethyl)-D,L-aspartamide (PHEA) and poly(lactic acid) (PLA), the O-(2-aminoethyl)-O'-galactosyl polyethylene glycol (GAL-PEG-NH2) or the methoxypolyethylene glycol amine (H2N-PEG-OCH3) is described. Starting from the obtained PHEA-PLA-PEG-GAL and PHEA-PLA-PEG copolymers, polymeric nanoparticles were prepared by high pressure homogenization-solvent evaporation method. To demonstrate their biodegradability as a function of the matrix composition, a chemical stability study was carried out until 21 days by incubating systems in two media mimicking physiological compartments (pH 7.4 and pH 5.5). The degradability of both nan…
Hepatocyte-targeted fluorescent nanoparticles based on a polyaspartamide for potential theranostic applications
2015
Abstract Here, the synthesis of a galactosylated amphiphilic copolymer bearing rhodamine (RhB) moieties and its use for the preparation of polymeric fluorescent nanoparticles for potential applications in therapy and diagnosis are described. To do this, firstly, a fluorescent derivative of α,β-poly( N -2-hydroxyethyl)- d , l -aspartamide (PHEA) was synthesized by chemical reaction with RhB, and with polylactic acid (PLA), to obtain PHEA-RhB-PLA. Then, the derivatization of PHEA-RhB-PLA with GAL-PEG-NH 2 allows obtaining PHEA-RhB-PLA-PEG-GAL copolymer, with derivatization degrees in -PLA and -PEG-GAL equal to 1.9 mol% and 4.5 mol%, respectively. Starting from this copolymer, liver-targeted f…
Production of polymeric micro- and nanostructures with tunable properties as pharmaceutical delivery systems
2020
Abstract The production of novel graft copolymers based on poly-e-caprolactone (PCL) and polyaspartamide are useful to realize structures for potential biomedical applications. Here, the synthesis of pegylated PCL/polyhydroxyethyl aspartamide (PHEA) graft copolymers (PHEA-g-SUCC-PCL-g-PEG) with tunable composition, was achieved by followpling a synthetic strategy that involved first the grafting of preformed PCL on PHEA backbone, then polyethylen glycol (PEG), by using 1,1′-carbonyldiimidazole (CDI) to speed up the condensation reaction. Graft copolymers with a Derivatization Degree (DD) in PCL ranging between 1.1 and 4.4 mol% were obtained, and processable with different technologies for t…
Margination of Fluorescent Polylactic Acid-Polyaspartamide based Nanoparticles in Microcapillaries In Vitro: the Effect of Hematocrit and Pressure.
2017
The last decade has seen the emergence of vascular-targeted drug delivery systems as a promising approach for the treatment of many diseases, such as cardiovascular diseases and cancer. In this field, one of the major challenges is carrier margination propensity (i.e., particle migration from blood flow to vessel walls); indeed, binding of these particles to targeted cells and tissues is only possible if there is direct carrier–wall interaction. Here, a microfluidic system mimicking the hydrodynamic conditions of human microcirculation in vitro is used to investigate the effect of red blood cells (RBCs) on a carrier margination in relation to RBC concentration (hematocrit) and pressure drop…
PEGYLATED POLYASPARTAMIDE–POLYLACTIDE BASED NANOPARTICLES PENETRATING CYSTIC FIBROSIS ARTIFICIAL MUCUS
2016
Here, the preparation of mucus-penetrating nanoparticles for pulmonary administration of ibuprofen in patients with cystic fibrosis is described. A fluorescent derivative of α,β-poly(N-2-hydroxyethyl)-D,L-aspartamide is synthesized by derivatization with rhodamine, polylactide, and poly(ethylene glycol), to obtain polyaspartamide− polylactide derivatives with different degrees of pegylation. Starting from these copolymers, fluorescent nanoparticles with different poly(ethylene glycol) content, empty and loaded with ibuprofen, showed spherical shape, colloidal size, slightly negative ζ potential, and biocompatibility toward human bronchial epithelial cells. The high surface poly(ethylene gly…