Search results for "Mechanical engineering"
showing 10 items of 4245 documents
Magnetic and structural study of (Fe1−Co )62 Nb8B30 bulk amorphous alloys
2004
Abstract The electric and magnetic properties of rapidly quenched (Fe 1− x Co x ) 62 Nb 8 B 30 bulk metallic glasses were studied with x =0, 0.33 and 0.50. The Curie temperature in the amorphous state was found to be about 245 °C for the Co-free alloy, 290 °C for x =0.33 and 201 °C for x =0.50, while the crystallization temperature is varying within 15° only around 600 °C. The change in T C correlates with the change in Mossbauer parameters. An interesting flattening effect of annealing on the hysteresis loop was observed which increases with the Co content. The resistivity could not be improved above 152 μΩ cm, which limits the high frequency applications of these alloys.
A procedure to calculate the I–V characteristics of thin-film photovoltaic modules using an explicit rational form
2015
Abstract Accurate models of the electrical behaviour of photovoltaic modules are effective tools for system design. One or two diode equivalent circuits have been widely used even though some mathematical difficulties were found dealing with implicit equations. In this paper, a new model based on a simple rational function, which does not contain any implicit exponential form, is presented. The model was conceived in order to be used with thin-film photovoltaic modules, whose current–voltage curves are characterised by very smooth shapes. The parameters of the model are evaluated by means of the derivatives of the issued characteristics in the short circuit and open circuit points at standa…
An accurate one-diode model suited to represent the current-voltage characteristics of crystalline and thin-film photovoltaic modules
2020
Abstract In this paper a new one-diode model, conceived in order to be used to represent the current-voltage curves of both crystalline and thin-film photovoltaic modules, is presented. The model parameters are calculated from the information contained in the datasheets issued by manufactures by means of simple iterative procedures that do not require the assumption of simplifying hypotheses. Some innovative relations describing the dependence of the parameters from the solar irradiance and cell temperature are adopted in order to permit the model to reliably simulate the electrical behaviour of photovoltaic devices operating in real conditions. The ability of the model to calculate the cur…
Three-dimensional photonic crystal intermediate reflectors for enhanced light-trapping in tandem solar cells
2011
A three-dimensional photonic crystal intermediate reflector for enhanced light trapping in tandem solar cells is presented. The intermediate reflector consists of a transparent and conductive ZnO:Al inverted opal sandwiched in between the top amorphous silicon and bottom microcrystalline silicon cell.
Electroluminescence and transport properties in amorphous silicon nanostructures
2006
We report the results of a detailed study on the structural, electrical and optical properties of light emitting devices based on amorphous Si nanostructures. Amorphous nanostructures may constitute an interesting system for the monolithic integration of optical and electrical functions in Si ULSI technology. In fact, they exhibit an intense room temperature electroluminescence (EL), with the advantage of being formed at a temperature of 900 °C, while at least 1100 °C is needed for the formation of Si nanocrystals. Optical and electrical properties of amorphous Si nanocluster devices have been studied in the temperature range between 30 and 300 K. The EL is seen to have a bell-shaped trend …
Immobilization of functionalized lipids in a random poly(methacrylate) copolymer monolayer
1995
It is shown that a monolayer of random poly(methacrylate) copolymer with a hydrophobic and a hydrophilic substituent exhibits a transition from the fluid to amorphous state. Above this transition any amphiphilic molecules mixed with the monolayer are immobile. Furthermore, such functionalized lipids are immobilized in the monolayer during the Langmuir-Blodgett transfer. The hydrophilic head-groups of the biotin-lipids remain on the formerly water-adjacent side of the monolayer, even if this side is exposed to air
Application of the Dang‐Van criterion for life determination under uniaxial random tension–compression with different mean values
2004
In this paper the experimental fatigue lives of specimens made of 10HNAP steel with the lives calculated with the Goodman and Gerber methods of cycle amplitude transformation and the Dang Van criterion for uniaxial loading are compared. Cycles were counted with the rain flow algorithm and damage was accumulated according to the Palmgren-Miner hypothesis. This paper includes comparison of the results for constant amplitude loading with a non-zero mean value and for random loading with zero or non-zero mean values. It has been shown that for 10HNAP steel the algorithm of fatigue life calculations using the Dang Van criterion gives satisfactory results.
Development and application of an alternative modelling approach for the thermo-mechanical analysis of a DEMO water-cooled lithium lead breeding blan…
2022
In the frame of the EUROfusion research activities devoted to the design of the DEMO breeding blanket (BB), the Water-Cooled Lithium-Lead BB (WCLL) concept is one of the candidates currently assessed in EU. To this end, an intense research campaign is ongoing to develop a robust geometric configuration for the WCLL BB Central Outboard Segment (COB). Since the current reference design of the WCLL COB segment is not mature enough to allow a full thermal-hydraulic assessment, an alternative procedure aimed at obtaining a thermal field for the whole segment without performing its complete thermal-hydraulic analysis is presented and applied in this work. The scope of the work is to obtain a ther…
Zero Viscosity Limit for Analytic Solutions of the Primitive Equations
2016
The aim of this paper is to prove that the solutions of the primitive equations converge, in the zero viscosity limit, to the solutions of the hydrostatic Euler equations. We construct the solution of the primitive equations through a matched asymptotic expansion involving the solution of the hydrostatic Euler equation and boundary layer correctors as the first order term, and an error that we show to be \({O(\sqrt{\nu})}\). The main assumption is spatial analyticity of the initial datum.
Affinity Sensors for the Diagnosis of COVID-19
2021
The coronavirus disease 2019 (COVID-19) outbreak caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) was proclaimed a global pandemic in March 2020. Reducing the dissemination rate, in particular by tracking the infected people and their contacts, is the main instrument against infection spreading. Therefore, the creation and implementation of fast, reliable and responsive methods suitable for the diagnosis of COVID-19 are required. These needs can be fulfilled using affinity sensors, which differ in applied detection methods and markers that are generating analytical signals. Recently, nucleic acid hybridization, antigen-antibody interaction, and change of reactive oxyge…