Search results for "Microfluidics"
showing 10 items of 121 documents
The liquid state of FG-nucleoporins mimics permeability barrier properties of nuclear pore complexes
2019
Nuclear pore complexes form a permeability barrier in vivo that regulates nucleocytoplasmic transport. Here, the authors present a microfluidic device that couples rapid liquid–liquid phase separation of nucleoporins with direct optical interrogation. Freshly formed liquid nucleoporin droplets mimic permeability barrier properties of NPCs.
Towards micrometer sized core-shell actuators from liquid crystalline elastomers by a continuous flow synthesis
2012
We present here the successful preparation of liquid crystalline core-shell elastomers via a microfluidic double-emulsion process. The customized set-up allows for a temperature-controlled fabrication of the core-shell particles from a thermoresponsive mesogenic monomer. The nematic liquid crystalline shell is filled with a non-mesogenic core of silicone oil. To verify the core-shell structure with optical microscopy, we prepared particles with a colored core using a red dye. We were also able to micro-manipulate the particles and penetrate them with a small glass capillary to extract the liquid core.
Effects of confinement and external fields on structure and transport in colloidal dispersions in reduced dimensionality
2012
In this work, we focus on low-dimensional colloidal model systems, via simulation studies and also some complementary experiments, in order to elucidate the interplay between phase behavior, geometric structures and transport properties. In particular, we try to investigate the (nonlinear!) response of these very soft colloidal systems to various perturbations: uniform and uniaxial pressure, laser fields, shear due to moving boundaries and randomly quenched disorder.We study ordering phenomena on surfaces or in monolayers by Monte Carlo computer simulations of binary hard-disk mixtures, the influence of a substrate being modeled by an external potential. Weak external fields allow a control…
Artificial multiple criticality and phase equilibria: an investigation of the PC-SAFT approach
2005
The perturbed-chain statistical associating fluid theory (PC-SAFT) is studied for a wide range of temperature, T, pressure, p, and (effective) chain length, m, to establish the generic phase diagram of polymers according to this theory. In addition to the expected gas-liquid coexistence, two additional phase separations are found, termed "gas-gas" equilibrium (at very low densities) and "liquid-liquid" equilibrium (at densities where the system is expected to be solid already). These phase separations imply that in one-component polymer systems three critical points occur, as well as equilibria of three fluid phases at triple points. However, Monte Carlo simulations of the corresponding sys…
One-piece micropumps from liquid crystalline core-shell particles
2012
Responsive polymers are low-cost, light weight and flexible, and thus an attractive class of materials for the integration into micromechanical and lab-on-chip systems. Triggered by external stimuli, liquid crystalline elastomers are able to perform mechanical motion and can be utilized as microactuators. Here we present the fabrication of one-piece micropumps from liquid crystalline core-shell elastomer particles via a microfluidic double-emulsion process, the continuous nature of which enables a low-cost and rapid production. The liquid crystalline elastomer shell contains a liquid core, which is reversibly pumped into and out of the particle by actuation of the liquid crystalline shell i…
Asymmetric nanopore rectification for ion pumping, electrical power generation, and information processing applications
2011
Single-track, asymmetric nanopores can currently be functionalised with a spatially inhomogeneous distribution of fixed charges and a variety of pore tip shapes. Optimising the asymmetric nanopore characteristics is crucial for practical applications in nanofluidics. We have addressed here this question for three cases based on different input/output chemical and electrical signals: (i) ion pumping up a concentration gradient by means of a periodic, time-dependent bias potential, (ii) information processing with a single nanopore acting as the nanofluidic diode of a logic gate, and (iii) electrical energy harvesting using a nanopore that separates two solutions of different salt concentrati…
Production of polymeric micro- and nanostructures with tunable properties as pharmaceutical delivery systems
2020
Abstract The production of novel graft copolymers based on poly-e-caprolactone (PCL) and polyaspartamide are useful to realize structures for potential biomedical applications. Here, the synthesis of pegylated PCL/polyhydroxyethyl aspartamide (PHEA) graft copolymers (PHEA-g-SUCC-PCL-g-PEG) with tunable composition, was achieved by followpling a synthetic strategy that involved first the grafting of preformed PCL on PHEA backbone, then polyethylen glycol (PEG), by using 1,1′-carbonyldiimidazole (CDI) to speed up the condensation reaction. Graft copolymers with a Derivatization Degree (DD) in PCL ranging between 1.1 and 4.4 mol% were obtained, and processable with different technologies for t…
Neurohybrid Memristive CMOS-Integrated Systems for Biosensors and Neuroprosthetics
2020
Here we provide a perspective concept of neurohybrid memristive chip based on the combination of living neural networks cultivated in microfluidic/microelectrode system, metal-oxide memristive devices or arrays integrated with mixed-signal CMOS layer to control the analog memristive circuits, process the decoded information, and arrange a feedback stimulation of biological culture as parts of a bidirectional neurointerface. Our main focus is on the state-of-the-art approaches for cultivation and spatial ordering of the network of dissociated hippocampal neuron cells, fabrication of a large-scale cross-bar array of memristive devices tailored using device engineering, resistive state program…
Fabrication of a negative PMMA master mold for soft-lithography by MeV ion beam lithography
2012
Abstract In this study, poly(methyl methacrylate) (PMMA) was investigated as a negative resist by irradiation with a high-fluence 2 MeV proton beam. The beam from a 1.7 MV Tandetron accelerator at the Plasma and Beam Physics Research Facility (PBP) of Chiang Mai University is shaped by a pair of computer-controlled L-shaped apertures which are used to expose rectangular pattern elements with 1–1000 μm side length. Repeated exposure of rectangular pattern elements allows a complex pattern to be built up. After subsequent development, the negative PMMA microstructure was used as a master mold for casting poly(dimethylsiloxane) (PDMS) following a standard soft-lithography process. The PDMS chi…
Development of procedures for programmable proximity aperture lithography
2013
Abstract Programmable proximity aperture lithography (PPAL) with MeV ions has been used in Jyvaskyla and Chiang Mai universities for a number of years. Here we describe a number of innovations and procedures that have been incorporated into the LabView-based software. The basic operation involves the coordination of the beam blanker and five motor-actuated translators with high accuracy, close to the minimum step size with proper anti-collision algorithms. By using special approaches, such writing calibration patterns, linearisation of position and careful backlash correction the absolute accuracy of the aperture size and position, can be improved beyond the standard afforded by the repeata…