Search results for "Microwave"

Procedures of Separation and Pre‐concentration for Molybdenum Determination Using Atomic Spectrometry—a Review

2004

Abstract The literature concerning the improvement of atomic and ionic procedures for molybdenum determination through separation and pre‐concentration were updated. Analytical procedures based on flame atomic absorption spectrometry (AAAS), electrothermal or graphite furnace atomic absorption spectrometry (GFAAS), inductively coupled plasma optical emission spectrometry (ICP‐OES), and inductively coupled plasma mass spectrometry were reviewed taking into consideration the preliminary steps, which can enhance the selectivity and sensitivity based on co‐precipitation, solvent extraction, and solid‐phase extraction. Both in‐batch and on‐line procedures were considered.

ICP-MS multielement determination in fly ash after microwave-assisted digestion of samples.

2001

A microwave assisted digestion procedure has been developed for dissolution of fly ash samples prior to the inductively coupled plasma-mass spectrometric determination of their elemental composition. The developed methodology was validated by carrying out the analysis of two high-silicate containing reference materials (CRM 134R sewage amended soil and NIES JR 1 rock) and by means of the comparison between results found by microwave-assisted digestion and ICP-MS of fly ash samples with those found by neutron activation analysis (NAA) for Sb, Cs, Cr, Co, Fe, U and Zn determination. The method developed can be recommended for routine multielement analysis of fly ash.

A clean analytical method for the spectrophotometric determination of formetanate incorporating an on-line microwave assisted hydrolysis step

1999

Abstract A fast and completely automated procedure is proposed for the spectrophotometric determination of formetanate in waters by means of its reaction with p-aminophenol (PAP). The method involves the on-line alkaline hydrolysis of formetanate to m-aminophenol (MAP) and its reaction, in the presence of KIO 4 as oxidant agent, with the quinoneimine form of PAP, to form a blue indophenol dye which absorbs at 576 nm. The on-line hydrolysis can be carried out in a 6 m reaction coil located inside the cavity of a domestic microwave oven operated at 650 W, or in a 4 m reaction coil located inside the cavity of a Microdigest 301 microwave system operated at 60 W and allows us, in both cases, a …

An ultrasound-assisted digestion method for the determination of toxic element concentrations in ash samples by inductively coupled plasma optical em…

2007

Abstract A method of ultrasound-assisted digestion followed by inductively coupled plasma optical emission spectrometry (ICP-OES) used for the determination of toxic element concentrations (arsenic, barium, cobalt, copper, lead, nickel, strontium, vanadium and zinc) in ash samples was developed. All the measurements were performed in robust plasma conditions which were tested by measuring the Mg(II) 280.270 nm/Mg(I) 285.213 nm line intensity ratios. The highest line intensity ratios were observed when a nebulizer gas flow of 0.6 L min−1, auxiliary gas flow of 0.2 L min−1 and plasma power of 1400 W were used for radially viewed plasma. The analysis of SRM 1633b showed that the ultrasound-ass…

Pressurized liquid extraction of organic contaminants in environmental and food samples

2015

Pressurized liquid extraction (PLE) is an automated technique that uses elevated temperature and pressure to achieve exhaustive extraction from solid matrices, so reducing solvent consumption and enhancing sample throughput when compared with traditional procedures. Hence, it can be considered an environment-friendly technique, generating small volumes of waste and reducing costs and time. This review focuses on application of this green technique to the analysis of organic contaminants in food and environmental matrices for monitoring purposes. We examine fundamentals and key aspects of the development of a PLE method, including pressurized hot-water extraction, together with some relevant…

Determination of pesticides and their degradation products in soil: critical review and comparison of methods

2004

18 páginas, 5 figuras, 5 tablas.

Determination of chromium in foods by flame atomic absorption and inductively coupled plasma spectrometry

1989

Extraction of polycyclic aromatic hydrocarbons from cookies: a comparative study of ultrasound and microwave-assisted procedures.

2008

The chromatographic determination of 15 polycyclic aromatic hydrocarbons (PAHs) in cookies has been improved in order to obtain a fast method with a low limit of detection through the combination of microwave-assisted extraction (MAE), oil saponification and solid-phase extraction clean-up before the injection of purified extracts in a C18 201TP52 (5 microm, 250 x 2.1 mm) column. Using acetonitrile-water as mobile phase, with a 50% to 95% w/w acetonitrile gradient for a fixed flow of 0.250 ml min(-1), 15 PAHs were separated in 45 min. The column temperature was maintained at 15 degrees C; and fluorimetric detection was made at a fixed excitation wavelength of 264 nm and emission measurement…

Microwave-assisted chemical modification of g-C3N4 for photoinduced processes: organic degradation, hydrogen production and selective oxidation of al…

2023

g-C3N4 powders were treated by means of the microwave technique in three different aqueous and organic media (HNO3, NaOH and N,N-dimethylformamide). All powders were analyzed by XRD reveling that g-C3N4 maintains its structure. The morphology of the samples was analyzed with scanning electron microscopy, where the micrographs reveals that the modifcation occurs on the surface of the g-C3N4. The photocatalytic activity of the samples was evaluated in the degradation of ciprofoxacin, hydrogen production and for the selective partial oxidation of 4-methoxybenzylalcohol (4-MBA) to its aldehyde. The sample treated with HNO3 (C3N4-HNO3) shows the best photocatalytic performance in the degradation…

Optimized Multipactor-Resistant Wedge-Shaped Waveguide Bandpass Filters

2013

[EN] Wedge-shaped waveguides present a certain advantage with respect to rectangular waveguides regarding their resistance to multipactor discharges. In this paper, the optimal configuration for the wedge geometry is investigated based on theoretical results, on a precise multipactor prediction tool, and on previous experience. In addition, design rules are presented, which allow us to achieve for wedge-shaped filters electrical performances comparable to the ones of rectangular waveguide filters, while at the same time improving the multipactor-free power range. As a proof of concept, two three-pole bandpass filters with equivalent electrical characteristic of 150-MHz bandwidth, centered a…