Search results for "Optic"

showing 10 items of 15126 documents

A New Multipactor Effect Model for Dielectric-Loaded Rectangular Waveguides

2019

Multipactor is an electron discharge that may appear in particle accelerators and microwave devices such as filters, multiplexers, and RF satellite payloads in satellite on-board equipment under vacuum conditions. When some resonance conditions are satisfied, secondary electrons get synchronized with the RF fields, and the electron population inside the device grows exponentially leading to a multipactor discharge. This multipactor discharge has some negative effects that degrade the device performance: increase of signal noise and reflected power, heating of the device walls, outgassing, detuning of resonant cavities, and even the partial or total destruction of the component. The main aim…

010302 applied physicsMultipactor effectMaterials sciencebusiness.industryParticle acceleratorElectron01 natural sciencesSignalSecondary electrons010305 fluids & plasmaslaw.inventionOutgassingOpticslaw0103 physical sciencesbusinessNoise (radio)Microwave2019 IEEE MTT-S International Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization (NEMO)
researchProduct

Accumulation of radiation defects and modification of micromechanical properties under MgO crystal irradiation with swift 132Xe ions

2020

This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 and 2019-2020 under grant agreement No. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. A.A. also acknowledges support via the project GF AP05134257 of Ministry of Education and Science of the Republic of Kazakhstan .

010302 applied physicsNuclear and High Energy PhysicsMaterials scienceOptical absorptionAnalytical chemistryDepth profile of hardeningCathodoluminescence02 engineering and technologyRadiation021001 nanoscience & nanotechnologySwift heavy ions01 natural sciencesFluenceRadiation defectsSpectral lineIonCrystalFluence dependenceIonization0103 physical sciences:NATURAL SCIENCES:Physics [Research Subject Categories]Irradiation0210 nano-technologyInstrumentationMagnesium oxideNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
researchProduct

Comparison of Single Event Transients Generated at Four Pulsed-Laser Test Facilities-NRL, IMS, EADS, JPL

2012

Four pulsed-laser single-event effects systems, differing in wavelength and pulse width, were used to generate single event transients in a large-area silicon photodiode and an operational amplifier (LM124) to determine how transient amplitude and charge collection varied among the different systems. The optical wavelength and the focused spot size are the primary factors influencing the resultant charge density profile. In the large-area photodiode the transients can be distorted by high charge-injection densities that occur for tightly focused, higher energy optical pulses. When the incident laser-pulse energies are corrected for reflection losses and photon efficiency, with collection de…

010302 applied physicsNuclear and High Energy PhysicsMaterials sciencePhotonta114010308 nuclear & particles physicsbusiness.industryTransistorLaser01 natural sciences7. Clean energy[SPI.TRON]Engineering Sciences [physics]/Electronicslaw.inventionPhotodiodeSemiconductor laser theoryWavelengthOpticsNuclear Energy and Engineeringlaw0103 physical sciencesOptoelectronicsTransient (oscillation)Electrical and Electronic EngineeringbusinessPulse-width modulationIEEE Transactions on Nuclear Science
researchProduct

Stopping cross-section measurements of 4He in TiN1.1O0.27

2000

Abstract The stopping cross-section for 4He projectiles in TiNx compounds has been measured using the backscattering method. A multi-compound marker layer deposited between the test film and the substrate was used to obtain the stopping cross-section at several energies with one energy of the incident beam. Two RBS spectra at definite tilt angles of the sample are taken for each beam energy. The assistance of computer codes to synthesize RBS spectra is very useful to obtain the pertinent information from the displacements of the peaks of the marker layers. Stopping cross-section values are obtained with an estimated uncertainty of about 6%.

010302 applied physicsNuclear and High Energy PhysicsMaterials scienceProjectile02 engineering and technologySubstrate (electronics)021001 nanoscience & nanotechnology01 natural sciencesSpectral lineCross section (physics)Tilt (optics)0103 physical sciencesAtomic physics0210 nano-technologyInstrumentationLayer (electronics)Beam energyEnergy (signal processing)Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
researchProduct

Strain detection in non-magnetic steel by Kerr-microscopy of magnetic tracer layers

2018

Abstract For many applications of steel, e.g. for the evaluation of the fatigue state of components or structures, the characterization of the microscopic strain distribution in the material is important. We present a proof-of-principle for the visualization of such strain distributions by Kerr-microscopy of ferromagnetic tracer layers on nonmagnetic steel sheets. The influence of indentation induced strain on the magnetic domain pattern of 20 nm Galfenol and Permalloy tracer layers on austenitic AISI 904L steel sheets was investigated. The obtained Kerr-microscopy images show a characteristic domain pattern in the strained regions of the steel sheets, which is consistent with a dominant ma…

010302 applied physicsPermalloyAusteniteMaterials scienceStrain (chemistry)Magnetic domainPattern formation02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesElectronic Optical and Magnetic MaterialsFerromagnetismIndentation0103 physical sciencesComposite material0210 nano-technologyGalfenolJournal of Magnetism and Magnetic Materials
researchProduct

Influence of Sr addition on structural, dielectric and Raman properties of Na0.5Bi0.5TiO3ceramics

2016

ABSTRACTLead free (Na0.5Bi0.5)1-xSrxTiO3 (x = 0, 0.01 and 0.02) ceramics were produced by a conventional solid-state sintering method. X-ray diffraction analysis shows that the obtained samples possess the perovskite structure with rhombohedral symmetry. The microstructure study shows a dense structure, in agreement with the relative density (above 97%). Dielectric analysis revealed the diffuse character of the electric permittivity anomalies and their shift to a lower temperature range after Sr doping of NBT. The Raman spectra are similar for all samples in agreement with the X-ray diffraction data. The possible origin of the observed effects was discussed.

010302 applied physicsPermittivityDiffractionMaterials scienceDopingAnalytical chemistrySintering02 engineering and technologyDielectric021001 nanoscience & nanotechnologyCondensed Matter PhysicsMicrostructure01 natural sciencesElectronic Optical and Magnetic Materialssymbols.namesakeControl and Systems Engineering0103 physical sciencesMaterials ChemistryCeramics and CompositessymbolsRelative densityElectrical and Electronic Engineering0210 nano-technologyRaman spectroscopyIntegrated Ferroelectrics
researchProduct

Processing, basic characterization and standard dielectric measurements on PLZT x/65/35 (2≤x≤13) ceramics

2016

ABSTRACTThe influence of external stress (0-800bar) on the dielectric properties of PLZT x/65/35 (2≤x≤13) ceramics was investigated. Applying uniaxial pressure leads to a change in the peak intensity of the electric permittivity (ϵ), of its frequency dispersion as well as in the dielectric hysteresis. The peak intensity of ϵ becomes broader and shifts to lower temperatures for PLZT x/65/35 with x = 2, 4, 6, 7, 9.75, 10, 11 and 13, with increasing pressure, on heating. It was concluded that applying uniaxial pressure induces an increase of Tm, and thus has similar effects as the increase of the Ti ion concentration in the PZT system. Results based on nanoregion switching processes under comb…

010302 applied physicsPermittivityMaterials science02 engineering and technologyDielectric021001 nanoscience & nanotechnologyCondensed Matter PhysicsUniaxial pressure01 natural sciencesElectronic Optical and Magnetic MaterialsCharacterization (materials science)IonStress (mechanics)visual_art0103 physical sciencesPeak intensityvisual_art.visual_art_mediumCeramicComposite material0210 nano-technologyFerroelectrics
researchProduct

Investigation of ZrO[sub 2]–Gd[sub 2]O[sub 3] Based High-k Materials as Capacitor Dielectrics

2010

Atomic layer deposition (ALD) of ZrO 2 ―Gd 2 O 3 nanolaminates and mixtures was investigated for the preparation of a high permittivity dielectric material. Variation in the relative number of ALD cycles for constituent oxides allowed one to obtain films with controlled composition. Pure ZrO 2 films possessed monoclinic and higher permittivity cubic or tetragonal phases, whereas the inclusion of Gd 2 O 3 resulted in the disappearance of the monoclinic phase. Changes in phase composition were accompanied with increased permittivity of mixtures and laminates with low Gd content. Further increase in the lower permittivity Gd 2 O 3 content above 3.4 cat. % resulted in the decreased permittivity…

010302 applied physicsPermittivityMaterials scienceRenewable Energy Sustainability and the EnvironmentAnalytical chemistryEquivalent oxide thickness02 engineering and technologyDielectric021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsAtomic layer depositionElectric field0103 physical sciencesMaterials ChemistryElectrochemistry0210 nano-technologyCurrent densityLeakage (electronics)High-κ dielectricJournal of The Electrochemical Society
researchProduct

First-principles studies of Ni–Ta intermetallic compounds

2012

National Natural Science Foundation of China [51131002, 50772018]; Program for New Century Excellent Talents in Universities of China [NCET-07-0139]; NSERC; CRC

010302 applied physicsPhase stabilityChemistryIntermetallic02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesEngineering physicsElectronic Optical and Magnetic MaterialsInorganic ChemistryCrystallography0103 physical sciencesMaterials ChemistryCeramics and CompositesPhysical and Theoretical Chemistry0210 nano-technologyJournal of Solid State Chemistry
researchProduct

The effect of bias field on the dielectric response of Ba0.95Pb0.05TiO3+Со2О3

2021

The nature of the dielectric response in ferroelectric ceramics Ba0.95Pb0.05TiO3+Со2О3 (BPTC) under the influence of a constant bias field EB in the phase transition region is studied. It is found ...

010302 applied physicsPhase transitionMaterials scienceCondensed matter physicsFerroelectric ceramics02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesDielectric responseElectronic Optical and Magnetic Materialschemistry.chemical_compoundchemistry0103 physical sciencesBarium titanate0210 nano-technologyConstant (mathematics)Bias fieldFerroelectrics
researchProduct