Search results for "Photoelectron spectroscopy"
showing 10 items of 439 documents
Application of Resonance Ionization Mass Spectrometry for Ultratrace Analysis of Technetium
2017
This work shows the ability of resonance ionization mass spectrometry (RIMS) to determine 99gTc at the ultratrace level. The characterization of the prepared samples by X-ray photoelectron spectroscopy (XPS) and optimization of the RIMS setup for this purpose, as well as the application of the RIMS method to a soil sample, are presented in this article. 97Tc was used as a tracer isotope to determine the amount of 99gTc in a soil sample with RIMS. With 8.8 × 1010 atoms of 97Tc as the tracer, the concentration of 99gTc was found to be 1.5 × 109 atoms per gram of dried sample material, demonstrating the sensitivity of the method. Furthermore, it could be shown that the 97Tc solution contained …
Towards sensory Langmuir monolayers consisting of macrocyclic pentaaminoanthraquinone
2014
A pentaazamacrocycle incorporating an intracyclic anthraquinone fragment (PENTAQ) was synthesized with the aim of forming metal-responsive Langmuir monolayers. PENTAQ allows a good discrimination by naked eye of copper ions in methanol–water solutions (50 : 50 v/v). Spectrophotometric investigations of the protonation and Cu2+ binding properties of PENTAQ were undertaken in order to gain a deeper insight into the pH-dependent speciation as well as the color changing process. PENTAQ monolayers at air/water and air/methanol–water interfaces were prepared according to the Langmuir procedure. The structure of the monolayers can be tuned by varying the pH of the aqueous subphase, since it was fo…
La1-xSrxCo1-yFeyO3-delta perovskites: Preparation, characterization and solar photocatalytic activity
2015
Abstract LaCoO3 perovskites substituted by Sr at the A site and/or by Fe at the B site have been prepared by the citrate method. Characterizations by several techniques, such as specific surface area (BET method), XRD, TPR, SEM, UV–vis in DRS mode, XPS and TGA analyses, have been performed. The so prepared La1−xSrxCo1−yFeyO3−δ perovskites are semiconductor materials showing band gap energy values from 1.9 to 3.2 eV. They displayed solar photocatalytic activity for the 2-propanol degradation in gas–solid regime. The photocatalytic results suggest that the perovskites containing Fe are less active and the activity decreases by increasing the Fe content, however the presence of iron avoids the…
Ultrathin and nanostructured ZnO-based films for fluorescence biosensing applications
2011
The fluorescence-based sensing capability of ultrathin ZnO-SiO(2) nanoplatforms, deposited by an integrated approach of colloidal lithography and metal organic chemical vapor deposition, has been investigated upon adsorption of fluorescein-labeled albumin, used as model analyte biomolecule. The protein immobilization process after spontaneous adsorption/desorption significantly enhances the green emission of the different ZnO-based films, as evidenced by scanning confocal microscopy, corresponding to a comparable protein coverage detected by X-ray photoelectron spectroscopy. Moreover, experiments of fluorescence recovery after photobleaching evidence that the protein lateral diffusion at th…
Magnetic interface formation at Fe/Cr/Fe(100)
1997
Photoemission magnetic dichroism of Fe and Cr 3p core levels was employed to investigate the magnetic order at the Fe/Cr/Fe(100) interface. For submonolayer and monolayer Fe coverages on Cr(100) the interface system appears magnetically frustrated, with no net magnetization along the parallel (antiparallel) direction of the substrate magnetization. The analysis of the Fe 3p photoemission dichroism allows to conclude that, at these low coverages, Fe is magnetically ordered but along an axis lying at 90° from the substrate Fe(100) magnetization, favoring the interpretation of biquadratic coupling between the ultrathin iron overlayer and the bulk iron substrate, across the Cr interlayer.
Cu-substituted lanthanum ferrite perovskites: Preparation, characterization and photocatalytic activity in gas-solid regime under simulated solar lig…
2016
Lanthanum orthoferrites LaFeO3 nanopowders doped with 20 mol% of Sr and 0-10-20 mol% of Cu were prepared by citrate auto-combustion synthesis and investigated in terms of crystal structure, morphology, surface area and optical properties by using several characterization techniques. The band gap energy values were found to range from 2.35 eV for LaFeO3 to 1.86 eV for the samples with the highest content of copper, this trend reflects the decrease of the particle size. All powders showed photocurrent response, the highest photocurrent was obtained for undoped orthoferrite calcined at 600°C. Their physical-chemical properties were related to photoelectrochemical behaviour. The the position of…
Effects of heat treatments on the properties of copper phthalocyanine films deposited by glow-discharge-induced sublimation
2006
Copper phthalocyanine films have been deposited by glow-discharge-induced sublimation. The films have undergone postdeposition heat treatments in air at 250 and 290 °C for different times, ranging from 30 min to 14 h. The properties of as-deposited and heated films have been investigated by different techniques in order to determine the effects of heat treatments on the film properties. Fourier transform infrared analysis and UV−visible optical absorption analysis point out a gradual evolution of the film structure from a mixture of α and β polymorphs to the only β polymorph in the sample heated at 290 °C for 14 h. A pronounced decrease of carbon and nitrogen atomic percentages against an o…
Novel TiO2-WO3 self-ordered nanotubes used as photoanodes: Influence of Na2WO4 and H2O2 concentration during electrodeposition
2021
[EN] Hybrid TiO2-WO3 nanostructures has been synthesized by electrochemical anodization under controlled hydrodynamic conditions followed by electrodeposition in the presence of different contents of Na2WO4 (5, 15 and 25 mM) and H2O2 (20, 30 and 40 mM). The influence of the electrolyte used for electrodeposition on the morphology, crystalline structure and photoelectrochemical response for water splitting has been evaluated through Field Emission Electronic Microscopy, High-Resolution Transmission Electron Microscopy, Confocal Raman Spectroscopy, Grazing Incidence X Ray Diffraction, X-Ray Photoelectron Spectroscopy, Atomic Force microscopy and photocurrent versus potential measurements. Add…
NANOPARTICLES BASED ON NOVEL AMPHIPHILIC POLYASPARTAMIDE COPOLYMERS
2010
In this article, the synthesis of two amphiphilic polyaspartamide copolymers, useful to obtain polymeric nanoparticles without using surfactants or stabilizing agents, is described. These copolymers were obtained starting from α,β-poly-(N-2-hydroxyethyl)-dl-aspartamide (PHEA) by following a novel synthetic strategy. In particular, PHEA and its pegylated derivative (PHEA-PEG2000) were functionalized with poly(lactic acid) (PLA) through 1,1′-carbonyldiimidazole (CDI) activation to obtain PHEA–PLA and PHEA-PEG2000–PLA graft copolymers, respectively. These copolymers were properly purified and characterized by 1H-NMR, FT-IR, and Size Exclusion Chromatography (SEC) analyses, which confirmed that…
Photoelectron spectra of aluminum cluster anions: Temperature effects and ab initio simulations
1999
Photoelectron (PES) spectra from aluminum cluster anions (from 12 to 15 atoms) at various temperature regimes, were studied using ab-initio molecular dynamics simulations and experimentally. The calculated PES spectra, obtained via shifting of the simulated electronic densities of states by the self-consistently determined values of the asymptotic exchange-correlation potential, agree well with the measured ones, allowing reliable structural assignments and theoretical estimation of the clusters' temperatures.