Search results for "SCOPE"
showing 10 items of 2420 documents
Vacuum arc deposition of protective layers on glass and polymer substrates
2001
Abstract Vacuum arc deposition allows one to deposit various coatings on insulating and temperature-sensitive substrates (like polymers). An advantage of the vacuum arc deposition technique is the low substrate temperature during the deposition process. A vacuum arc deposition apparatus for the coating of large-area substrates has been developed. Ti, TiN, TiO 2 and diamond-like single and multilayer coatings have been deposited on plastic and glass substrates. The vacuum arc technology permits formation of multilayer colour filters of high uniformity on substrates with dimensions up to 2000×1400 mm 2 . The microstructure, chemical composition and optical properties of the deposited coatings…
Deformation behavior of nanostructured ZnO films on glass
2012
Abstract Nanostructured ZnO films on glass substrate were studied by nanoindentation, scanning electron and atomic force microscopy. The films were obtained by a straightforward mechanoactivated oxidation method. The morphology of the obtained films was grained with a grain size in the range 50–100 nm and the thickness was approximately 2 μm. A detailed deformation behavior of ZnO films, critical parameters and indentation induced plastic deformation mechanisms were determined in correlation to bulk ZnO, Si single crystal and commercial ZnO films. In comparison to a single crystal ZnO, nanostructured films exhibit increased hardness (9 GPa); however, the Young's modulus is decreased (120 GP…
Studies and Researches on the Obtaining of Sintered Gradual Porous Structures by Irregular Nickel Powders Sedimentation
2012
The aim of this work is to obtain sintered porous membranes with graded structure for microfiltration by sedimentation and sintering of metallic powders. Our previous studies have demonstrated the possibility of obtaining sintered porous materials with graded structure by sedimentation. In this paper, irregular nickel particles were used having a grain size in the 2-90 µm range evaluated using scanning electron microscopy and laser scattering particle size analyzer. The powders were sedimented into a sintering die in a sedimentation medium consisting of water and dispersant agent. After drying, the samples were sintered at 1000°C for 10 minutes in vacuum (~1•10-3 Pa). The structures obtaine…
Growth, structural and optical properties of AlGaN nanowires in the whole composition range.
2013
International audience; We report on the growth of AlxGa1-xN nanowires by plasma-assisted molecular beam epitaxy for x in the 0.3-0.8 range. Based on a combination of macro- and micro-photoluminescence, Raman spectroscopy, x-ray diffraction and scanning electron microscopy experiments, it is shown that the structural and optical properties of AlGaN NWs are governed by the presence of compositional fluctuations associated with strongly localized electronic states. A growth model is proposed, which suggests that, depending on growth temperature and metal adatom density, macroscopic composition fluctuations are mostly of kinetic origin and are directly related to the nucleation of the AlGaN na…
Enhancement of persistent luminescence in Ca2SnO4: Sm3+
2021
Abstract Reddish-orange persistent luminescent Ca2SnO4: 0.1% Sm3+ co-doped with 0–10% Gd3+ was prepared using solid state synthesis. The phase formation and morphology was analyzed using X-ray diffraction and scanning electron microscopy. Incorporation of Sm3+ and Gd3+ in Ca2SnO4 lattice was investigated using site-selective spectroscopy and electron paramagnetic resonance. In all samples reddish-orange persistent luminescence and photochromic effect was observed after excitation with UV as well as X-rays. The thermostimulated luminescence curves indicated that the introduction of Gd3+ increases the number of shallow traps of charges which enhance the intensity of persistent luminescence. I…
Improved Cu2O/AZO Heterojunction by Inserting a Thin ZnO Interlayer Grown by Pulsed Laser Deposition
2019
Cu2O/ZnO:Al (AZO) and Cu2O/ZnO/AZO heterojunctions have been deposited on glass substrates by a unique three-step pulsed laser deposition process. The structural, optical, and electrical properties of the oxide films were investigated before their implementation in the final device. X-ray diffraction analysis indicated that the materials were highly crystallized along the c-axis. All films were highly transparent in the visible region with enhanced electrical properties. Atomic force and scanning electron microscopies showed that the insertion of a ZnO layer between the Cu2O and AZO films in the heterojunction enhanced the average grain size and surface roughness. The heterojunctions exhibi…
Preparation of graphene nanocomposites from aqueous silver nitrate using graphene oxide’s peroxidase-like and carbocatalytic properties
2020
AbstractThe present study evaluates the role of graphene oxide’s (GO’s) peroxidase-like and inherent/carbocatalytic properties in oxidising silver nitrate (AgNO3) to create graphene nanocomposites with silver nanoparticles (GO/Ag nanocomposite). Activation of peroxidase-like catalytic function of GO required hydrogen peroxide (H2O2) and ammonia (NH3) in pH 4.0 disodium hydrogen phosphate (Na2HPO4). Carbocatalytic abilities of GO were triggered in pH 4.0 deionised distilled water (ddH2O). Transmission electron microscope (TEM), scanning electron microscope (SEM), cyclic voltammetry (CV) and UV-Vis spectroscopy aided in qualitatively and quantitatively assessing GO/Ag nanocomposites. TEM and …
Growth, Structure, and Stability of KxWO3 Nanorods on Mica Substrate
2012
International audience; KxWO3 nanorods, interesting as gas sensors, were elaborated on mica muscovite substrate and characterized by atomic force microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and mainly transmission electron microscopy. A combination of structural analyses allowed determining the morphology of these rods, and selected area electron diffraction experiments pointed out the simultaneous presence of the exotic hexagonal and stable monoclinic phases. Moreover, the presence of potassium inside the nanorods, coming from the mica substrate, was revealed. By combining all the observations, a growth model is proposed, consisting of the stacking of two di…
Growth kinetics of colloidal Ge nanocrystals for light harvesters
2016
Colloidal Ge nanocrystals (NCs) are gaining increased interest because of their potential application in low-cost optoelectronic and light harvesting devices. However, reliable control of colloidal NC synthesis is often an issue and a deeper understanding of the key-role parameters governing NC growth is highly required. Here we report an extended investigation on the growth of colloidal Ge NCs synthesized from a one-pot solution based approach. A systematic study of the effects of synthesis time, temperature and precursor concentration is elucidated in detail. X-ray diffraction (XRD) analysis reveals the presence of crystalline Ge NCs with a mean size (from 5 to 35 nm) decreasing with the …
Evaluation of mechanical and morphologic features of PLLA membranes as supports for perfusion cells culture systems
2015
Abstract Porous biodegradable PLLA membranes, which can be used as supports for perfusion cell culture systems were designed, developed and characterized. PLLA membranes were prepared via diffusion induced phase separation (DIPS). A glass slab was coated with a binary PLLA–dioxane solution (8 wt.% PLLA) via dip coating, then pool immersed in two subsequent coagulation baths, and finally dried in a humidity-controlled environment. Surface and mechanical properties were evaluated by measuring pore size, porosity via scanning electron microscopy, storage modulus, loss modulus and loss angle by using a dynamic mechanical analysis (DMA). Cell adhesion assays on different membrane surfaces were a…