Search results for "Steel"
showing 10 items of 338 documents
Ab Initio Modeling of Y and O Solute Atom Interaction in Small Clusters within the bcc Iron Lattice
2018
This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euroatom research and training programme 2014–2018 under grant agreement No 633053. The authors are indebted to A. Möslang and P. V. Vladimirov for stimulating discussions. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
Tandem laser-gas metal arc welding joining of 20 mm thick super duplex stainless steel: An experimental and numerical study
2020
The present work covers the topic of strains and stresses prediction in case of welded steel structures. Steel sheets of 20 mm thickness made in UR™2507Cu are welded using a laser and gas metal arc welding processes combination. The focused laser beam leads the arc in a Y-shape chamfer geometry. Both sources are 20 mm apart from each other in order to avoid any synergic effect with each other. In order to predict residual strain, a 3D unsteady numerical simulation has been developed in COMSOL finite element software. A volume heat source has been identified based on the temperature measurements made by 10 K-type thermocouples, implanted inside the workpiece. The 50 mm deep holes are drille…
Influence of residual stress, surface roughness and crystallographic texture induced by machining on the corrosion behaviour of copper in salt-fog at…
2012
International audience; The influence of quadratic stress, crystallographic texture, lubrication and surface roughness generated by superfinish turning on the corrosion behaviour of pure copper was quantified in salt-fog atmosphere. This was done using statistical analysis (Pearson's correlation matrix). Three compounds were found after corrosion tests: atacamite/paratacamite and a black layer (mixture of the lubricant and the salt atmosphere). Surface characteristics were classified according to their decreasing influence on the formation of atacamite/paratacamite as follows: surface roughness and quadratic stress. Lubrication and the crystallographic texture have the lowest influence on c…
Effect of position and force tool control in friction stir welding of dissimilar aluminum-steel lap joints for automotive applications
2020
Widespread use of aluminum alloys for the fabrication of car body parts is conditional to the use of appropriate welding methods, especially if dissimilar welding must be performed with automotive steel grades. Friction stir welding (FSW) is considered to be a reasonable solution to obtain sound aluminum-steel joints. In this context, this work studies the effects of tool position and force control in dissimilar friction stir welding of AA6061 aluminum alloy on DC05 low carbon steel in lap joint configuration, also assessing proper welding parameter settings. Naked eye and scanning electron microscopy (SEM) have been used to detect macroscopic and microscopic defects in joints, as well as t…
Direct laser welding of pure titanium to austenitic stainless steel
2018
Abstract Direct butt joining of pure titanium to 316L stainless steel with continuous Yb:YAG laser was performed with variation of the beam offset from joint line. Mechanical properties of samples were evaluated by tensile tests and three-point flexural tests. The fractured surfaces and cross sections of welds were examined by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD). Tensile properties of welds were strongly determined by the beam offset from joint line and are well described by Weibull statistics. Ultimate tensile strength of 174 ± 69 MPa and ultimate flexural strength of 297 ± 48 MPa were obtained. Brittle fracture took place in…
Manufacturing Risk Identification in the Steel Industry
2020
The steel manufacturing industry is an inseparable part of the nuclear power plant construction project. This industry is a business full of dynamics, risks, and challenges. The implementation of risk management becomes an obligation that must be executed in managing this very complex project. In general, risk management in manufacturing includes steps to understand and identify potential problems that may occur, evaluate, monitor, and handle risks. The main risk management objectives are to prevent or minimize adverse effects due to unforeseen events through risk aversion or preparation of contingency plans related to those risks. This paper describes the identification of risk factors and…
Modelling load-transmission mechanisms in axially loaded RC columns retrofitted with steel jackets
2018
The use of steel jacketing technique is a common practice for retrofitting existing reinforced concrete (RC) columns, as it allows increasing load-carrying capacity and ductility of the member. When the external jacket has no-end connections – i.e. the jacket is indirectly loaded- the load sustained by the column is transferred from the inner RC core to the external jacket through shear stresses along the contact surface. The assessment of this mechanism is quite complex, due to the marked non-linear behaviour of constituent materials and to the calibration of a proper shear stress-relative slip constitutive law of the concrete-to-steel interface. In this paper, a step-by-step analytical ap…
Sperm DNA fragmentation: An early and reliable marker of air pollution.
2017
Environmental factors could have a key role in the continuous and remarkable decline of sperm quality observed in the last decades. This study compared the seminal parameters and sperm DFI in men living in areas with different levels of air pollution. Results demonstrate that both steel plants workers and patients living in a high polluted area show a mean percentage of sperm DNA fragmentation above 30%, highlighting a clear sperm damage. In this work, two different techniques were used to measure sperm DNA damage in patientsâ groups, finding in both cases a high sperm DFI in patients living in polluted areas. We candidate sperm DNA fragmentation as a valuable early marker of the presence…
Effect of green tea extract on enteric viruses and its application as natural sanitizer
2017
In this work, the effect of green tea extract (GTE) was assessed against murine norovirus (MNV) and hepatitis A virus (HAV) at different temperatures, exposure times and pH conditions. Initially, GTE at 0.5 and 5 mg/ml were individually mixed with each virus at 5 log TCID50/ml and incubated 2 h at 37 °C at different pHs (from 5.5 to 8.5). GTE affected both viruses depending on pH with higher reductions observed in alkaline conditions. Secondly, different concentrations of GTE (0.5 and 5 mg/ml) were mixed with viral suspensions and incubated for 2 or 16 h at 4, 25 and 37 °C at pH 7.2. A concentration-, temperature- and exposure time-dependent response was showed by GTE in suspension tests, w…
On the variations of acoustic absorption peak with particle velocity in micro-perforated panels at high level of excitation.
2010
The acoustic behavior of micro-perforated panels (MPP) is studied theoretically and experimentally at high level of pressure excitation. A model based on Forcheimer's regime of flow velocity in the perforations is proposed. This model is valid at relatively high Reynolds numbers and low Mach numbers. The experimental method consists in measuring the acoustical pressure at three different positions in an impedance tube, the two measurement positions usually considered in an impedance tube and one measurement in the vicinity of the rear surface of the MPP. The impedance tube is equipped with a pressure driver instead of the usual loudspeaker and capable of delivering a high sound pressure lev…