Search results for "Technology"

showing 10 items of 30343 documents

Experimental Investigation of Efficiency Map for an Inverter-Fed Surface-Mount Permanent Magnet Synchronous Motor

2019

Losses in inverter-fed permanent magnet motors are underestimated by using analytical or numerical approach since additional losses due to extra harmonics of the frequency converter are normally skipped. Further, losses in switches and passive components of the converter and the effect of switching frequencies cannot be numerically taken into consideration. Loss-minimizing control and proper efficiency analysis of inverter-fed permanent magnet motors cannot be achieved if an efficiency map is built based on a numerical investigation of the motors alone. This works first reviews losses in a surface-mount permanent magnet synchronous motor (SPMSM) and frequency converters. The efficiency map …

010302 applied physicsPermanent magnet synchronous motorComputer science020208 electrical & electronic engineeringSwitching frequency02 engineering and technologyConverters01 natural sciencesControl theoryModulationHarmonicsvisual_artMagnet0103 physical sciencesElectronic component0202 electrical engineering electronic engineering information engineeringvisual_art.visual_art_mediumInverter2019 8th International Conference on Renewable Energy Research and Applications (ICRERA)
researchProduct

Influence of Sr addition on structural, dielectric and Raman properties of Na0.5Bi0.5TiO3ceramics

2016

ABSTRACTLead free (Na0.5Bi0.5)1-xSrxTiO3 (x = 0, 0.01 and 0.02) ceramics were produced by a conventional solid-state sintering method. X-ray diffraction analysis shows that the obtained samples possess the perovskite structure with rhombohedral symmetry. The microstructure study shows a dense structure, in agreement with the relative density (above 97%). Dielectric analysis revealed the diffuse character of the electric permittivity anomalies and their shift to a lower temperature range after Sr doping of NBT. The Raman spectra are similar for all samples in agreement with the X-ray diffraction data. The possible origin of the observed effects was discussed.

010302 applied physicsPermittivityDiffractionMaterials scienceDopingAnalytical chemistrySintering02 engineering and technologyDielectric021001 nanoscience & nanotechnologyCondensed Matter PhysicsMicrostructure01 natural sciencesElectronic Optical and Magnetic Materialssymbols.namesakeControl and Systems Engineering0103 physical sciencesMaterials ChemistryCeramics and CompositessymbolsRelative densityElectrical and Electronic Engineering0210 nano-technologyRaman spectroscopyIntegrated Ferroelectrics
researchProduct

Processing, basic characterization and standard dielectric measurements on PLZT x/65/35 (2≤x≤13) ceramics

2016

ABSTRACTThe influence of external stress (0-800bar) on the dielectric properties of PLZT x/65/35 (2≤x≤13) ceramics was investigated. Applying uniaxial pressure leads to a change in the peak intensity of the electric permittivity (ϵ), of its frequency dispersion as well as in the dielectric hysteresis. The peak intensity of ϵ becomes broader and shifts to lower temperatures for PLZT x/65/35 with x = 2, 4, 6, 7, 9.75, 10, 11 and 13, with increasing pressure, on heating. It was concluded that applying uniaxial pressure induces an increase of Tm, and thus has similar effects as the increase of the Ti ion concentration in the PZT system. Results based on nanoregion switching processes under comb…

010302 applied physicsPermittivityMaterials science02 engineering and technologyDielectric021001 nanoscience & nanotechnologyCondensed Matter PhysicsUniaxial pressure01 natural sciencesElectronic Optical and Magnetic MaterialsCharacterization (materials science)IonStress (mechanics)visual_art0103 physical sciencesPeak intensityvisual_art.visual_art_mediumCeramicComposite material0210 nano-technologyFerroelectrics
researchProduct

Microwave properties and structure of La–Ti–Si–B–O glass-ceramics for applications in GHz electronics

2017

Abstract A dielectric bulk glass-ceramic of the La 2 O 3 –TiO 2 –SiO 2 –B 2 O 3 system is developed which is able to fulfill the requirements for dielectric loading-based mobile communication technologies. It is shown that the given dielectric requirements can be fulfilled by glass-ceramic materials without being dependent on ceramic processing techniques. The material exhibited permittivity values of 20  ɛ r Qf τ f τ f material with a Qf value of 9500 GHz and ɛ r  = 21.4 could be achieved at a ceramming temperature T cer  = 870 °C. The material is aimed to provide an alternative to existing, commercially used sintered ceramic materials. Further focus is laid on the investigation of the dom…

010302 applied physicsPermittivityMaterials science02 engineering and technologyDielectricSintered ceramic021001 nanoscience & nanotechnologyMicrostructure01 natural sciencesvisual_art0103 physical sciencesMaterials ChemistryCeramics and Compositesvisual_art.visual_art_mediumDielectric lossCeramicElectronicsComposite material0210 nano-technologyMicrowaveJournal of the European Ceramic Society
researchProduct

Domain Walls Motions in Barium Titanate Ceramics

1996

The shear modulus and mechanical loss at low frequencies (0.01, 0.3, 1 Hz) are measured by an inverted pendulum for BaTiO 3 ceramic with large grain sizes. The permittivity and dielectric losses are also investigated for the same material at higher frequencies between 1 and 100 kHz as function of temperature. Those results show several relaxation peaks in the ferroelectric phases. The activation energy of each peak is obtained to be 0.29, 0.45, 0.68, 0.92 eV. The influences of strain amplitude and thermal treatments are studied specially for the mechanical relaxation peak located in the tetragonal phase. All the relaxation peaks could be associated to the interaction of oxygen vacancies in …

010302 applied physicsPermittivityMaterials scienceCondensed matter physicsGeneral Physics and AstronomyMineralogy02 engineering and technology021001 nanoscience & nanotechnology01 natural sciencesFerroelectricityPiezoelectricityShear moduluschemistry.chemical_compoundchemistry[PHYS.HIST]Physics [physics]/Physics archivesvisual_art0103 physical sciencesBarium titanatevisual_art.visual_art_mediumRelaxation (physics)Dielectric lossCeramic0210 nano-technologyLe Journal de Physique IV
researchProduct

Investigation of ZrO[sub 2]–Gd[sub 2]O[sub 3] Based High-k Materials as Capacitor Dielectrics

2010

Atomic layer deposition (ALD) of ZrO 2 ―Gd 2 O 3 nanolaminates and mixtures was investigated for the preparation of a high permittivity dielectric material. Variation in the relative number of ALD cycles for constituent oxides allowed one to obtain films with controlled composition. Pure ZrO 2 films possessed monoclinic and higher permittivity cubic or tetragonal phases, whereas the inclusion of Gd 2 O 3 resulted in the disappearance of the monoclinic phase. Changes in phase composition were accompanied with increased permittivity of mixtures and laminates with low Gd content. Further increase in the lower permittivity Gd 2 O 3 content above 3.4 cat. % resulted in the decreased permittivity…

010302 applied physicsPermittivityMaterials scienceRenewable Energy Sustainability and the EnvironmentAnalytical chemistryEquivalent oxide thickness02 engineering and technologyDielectric021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsAtomic layer depositionElectric field0103 physical sciencesMaterials ChemistryElectrochemistry0210 nano-technologyCurrent densityLeakage (electronics)High-κ dielectricJournal of The Electrochemical Society
researchProduct

Raman spectra and anomalies of dielectric properties and thermal expansion of lead-free (1−x)Na0.5Bi0.5TiO3-xSrTiO3 (x = 0, 0.08 and 0.1) ceramics

2016

ABSTRACTThermal expansion, Raman and dielectric properties of the lead-free (1−x)Na0.5Bi0.5TiO3-xSrTiO3 (x = 0, 0.08 and 0.1) ceramic solid solutions, fabricated by the conventional solid-state reaction method, were investigated. The Sr-doping results in an increase of the dielectric permittivity, broadening of the permittivity maximum, enhancement of the relaxation near depolarization temperature, broadening of the Raman bands and shift of all anomalies toward lower temperatures. The observed effects are attributed to an increase of the degree of cationic disorder and enhancement of the relaxor-like features. Anomalies in the thermal expansion strain were observed at the temperatures corre…

010302 applied physicsPermittivityPhase transitionMaterials scienceCondensed matter physicsRelaxation (NMR)02 engineering and technologyDielectric021001 nanoscience & nanotechnology01 natural sciencesThermal expansionTetragonal crystal systemsymbols.namesakePhase (matter)0103 physical sciencessymbolsGeneral Materials Science0210 nano-technologyRaman spectroscopyInstrumentationPhase Transitions
researchProduct

Dielectric, thermal and Raman spectroscopy studies of lead-free (Na0.5Bi0.5)1−xSrxTiO3 (x = 0, 0.04 and 0.06) ceramics

2016

ABSTRACTLead-free (Na0.5Bi0.5)1−xSrxTiO3 (x = 0, 0.04 and 0.06) ceramics with relative densities above 97% were prepared by solid-state synthesis process. Their dielectric, thermal and Raman properties were studied. X-ray diffraction analysis shows perovskite structure with rhombohedral symmetry at room temperature. Sr doping of Na0.5Bi0.5TiO3 (NBT) results in an increase of the dielectric permittivity, diffusing of the permittivity maximum and its shift toward lower temperatures. The temperature of the rhombohedral–tetragonal phase transition indicated by the differential scanning calorimetry (DSC) peak and relaxational dielectric anomaly near the depolarization temperature are also shifte…

010302 applied physicsPermittivityPhase transitionMaterials scienceDopingAnalytical chemistry02 engineering and technologyDielectric021001 nanoscience & nanotechnology01 natural sciencessymbols.namesakeDifferential scanning calorimetryvisual_art0103 physical sciencesvisual_art.visual_art_mediumsymbolsRelaxation (physics)General Materials ScienceCeramic0210 nano-technologyRaman spectroscopyInstrumentationPhase Transitions
researchProduct

Non-Linearity Extremum in Niobium Doped Potassium Tantalate

1997

We report non-linear dielectric measurements in the KTaO 3 :Nb system (x Nb ≤ 0.05). The non-linear susceptibility diverges at low temperatures and reaches maximum values in the intermediate range (0.0075 ≤ x Nb ≤ 0.02). To account for this extremum non linearity, we propose a model of temperature dependent clusters which fits with a number of experimental reports. We also suggest that this model may be applied to the related compounds SrTiO 3 :Ca and KTaO 3 :Na.

010302 applied physicsPermittivityRange (particle radiation)Materials sciencePotassiumDopingGeneral EngineeringAnalytical chemistryNiobiumchemistry.chemical_elementStatistical and Nonlinear Physics02 engineering and technologyDielectric021001 nanoscience & nanotechnology01 natural sciences3. Good healthTantalatechemistry[PHYS.HIST]Physics [physics]/Physics archivesPercolation0103 physical sciences0210 nano-technologyJournal de Physique I
researchProduct

First-principles studies of Ni–Ta intermetallic compounds

2012

National Natural Science Foundation of China [51131002, 50772018]; Program for New Century Excellent Talents in Universities of China [NCET-07-0139]; NSERC; CRC

010302 applied physicsPhase stabilityChemistryIntermetallic02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesEngineering physicsElectronic Optical and Magnetic MaterialsInorganic ChemistryCrystallography0103 physical sciencesMaterials ChemistryCeramics and CompositesPhysical and Theoretical Chemistry0210 nano-technologyJournal of Solid State Chemistry
researchProduct