Search results for "Thermal Analysis"
showing 10 items of 208 documents
Development of a Two-Dimensional Simplified Tool for the Analysis of the Cooling of the ITER TF Winding Pack
2018
The cooling of the ITER toroidal field (TF) coils winding pack is guaranteed by the circulation of supercritical helium (He) in seven hydraulic circuits corresponding to the Nb3Sn cable in conduit conductors, and in 74 channels devoted to the cooling of the stainless steel case supporting the winding pack. A tool entirely developed inside ANSYS with the APDL language has been created with the aim of computing the temperature distribution in the TF winding pack in different poloidal locations. The tool also allows the assessment of the He temperature during plasma operation in the case cooling channels. The considered heat load is the volumetric nuclear heating computed with the MCNP code in…
Local structure of gadolinium in oxyfluoride glass matrices containing SrF2 and BaF2 crystallites
2016
Abstract Gd3 + doped aluminosilicate oxyfluoride glasses and glass-ceramics containing SrF2 and BaF2 crystallites have been studied by differential thermal analysis (DTA), X-ray diffraction (XRD), transmission electron microscopy (TEM), photoluminescence (PL) and electron paramagnetic resonance (EPR) spectroscopy techniques. A pronounced EPR fine structure emerges after the heat treatment of the glass matrix. EPR spectra simulations indicate the formation of cubic, tetragonal and trigonal Gd3 + centres in the studied compositions.
Luminescence and energy transfer in Dy3+/Eu3+ co-doped aluminosilicate oxyfluoride glasses and glass-ceramics
2018
Abstract A series of oxyfluoride glasses with the composition SiO2–CaF2–Al2O3–CaO, doped with Dy2O3 (0.5–1 mol%) and Eu2O3 (0–4 mol%), have been prepared using the melt quenching method. The glass-ceramics have been obtained by heating the as-made glasses at 680 °C and 750 °C for 1 h. The glasses and the glass-ceramics were investigated using photoluminescence techniques in the near-UV and visible ranges, and differential thermal analysis (DTA) and x-ray diffraction (XRD) measurements were performed. The samples doped with 0.5 mol% Dy3+ were observed to have the highest luminescence intensity under 453 nm excitation compared to the samples doped with 1 mol% Dy3+ and the co-doped samples. Th…
Hyperbranched PEG by Random Copolymerization of Ethylene Oxide and Glycidol
2010
The synthesis of hyperbranched poly(ethylene glycol) (hbPEG) in one step was realized by random copolymerization of ethylene oxide and glycidol, leading to a biocompatible, amorphous material with multiple hydroxyl functionalities. A series of copolymers with moderate polydispersity ($\overline {M} _{{\rm w}} /\overline {M} _{{\rm n}} $ < 1.8) was obtained with varying glycidol content (3-40 mol-%) and molecular weights up to 49 800 g mol(-1) . The randomly branched structure of the copolymers was confirmed by (1) H and (13) C NMR spectroscopy and thermal analysis (differential scanning calorimetry). MTS assay demonstrated low cell toxicity of the hyperbranched PEG, comparable to the highly…
TG/DTA-FTIR as a method for analysis of tall oil based rigid polyurethane foam decomposition gaseous products in a low oxygen environment
2020
Abstract This study is an investigation of the suitability of the thermogravimetry and differential thermal analysis method coupled with Fourier Transform Infrared spectrometry (TG/DTA-FTIR) for a thermal degradation gaseous product analysis of a rigid polyurethane-polyisocyanurate (PU-PIR) foam synthesised from high functionality tall oil fatty acids (TOFA) based polyols. The FTIR spectra of the TG-generated gaseous thermal degradation products of three PU-PIR formulations with varied high functionality TO based polyol content (45, 75 and 95 pbw) and a different tier of isocyanate (NCO) indexes (110, 150, 200, 300 and 400) for each formulation were compared to the spectra of a formulation …
Dielectric Spectroscopy of Recycled Polylactide
2014
The effects of multiple mechanical recycling on amorphous polylactide (PLA) were simulated by means of five successive injection-grinding cycles. The influence of the induced thermo-mechanical degradation on the dielectric properties of PLA was analysed. The relaxation spectra were studied in terms of the complex dielectric permittivity (ε0 and ε00) and the dielectric loss tangent, tg(d) in the frequency range from 102 to 107 Hz over the temperature interval from 0 C to 140 C. It was possible to distinguish two relaxations zones, one at low temperatures and high frequencies (b relaxation) and another at higher temperatures and lower frequencies (a relaxation). The individual relaxations wer…
On the formation of lamellae during annealing of extended chain crystals of radiation-polymerized trioxane
1969
Abstract The structure changes of radiation-polymerized trioxane taking place during annealing have been studied by means of electron microscopy, X-ray small- and wide-angle scattering, and differential thermal analysis. The original fibrillar crystals, supposedly consisting of extended chains, change into lamellar crystals due to annealing at temperatures between 150° and 190°C. Lamella formation can be connected with the appearance of a long period of about 200A which is not observed in the unannealed sample. During annealing within the same temperature range the X-ray reflections due to the twin structure of the original polytrioxane disappear, whereas the orientation of the fraction wit…
Enhanced bistability by guest inclusion in Fe(ii) spin crossover porous coordination polymers
2012
Inclusion of thiourea guest molecules in the tridimensional spin crossover porous coordination polymers {[Fe(pyrazine)[M(CN)(4)]} (M = Pd, Pt) leads to novel clathrates exhibiting unprecedented large thermal hysteresis loops of ca. 60 K wide centered near room temperature.
Morphology and structure of electrospun CoFe2O4/multi-wall carbon nanotubes composite nanofibers
2010
CoFe2O4/multiwall carbon nanotubes (MWCNTs) composite nanofibers were produced by electrospinning a dispersion of MWCNTs in a solution of polyvinylpyrrolidone, iron(III) nitrate nonahydrate, cobalt (II) acetate tetrahydrate, absolute ethanol and H2O. Microstructure was examined by scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HR-TEM). Thermal behaviour was studied by thermogravimetry and differential thermal analysis (TG-DTA) and phase analysis of calcined fibers was performed by X-ray diffraction (XRD). Upon thermal treatment at 450 °C defect-free, randomly oriented composite fibers having a mean diameter of 60 ± 10 nm were obtained. The results s…
Rare earth doped glass–ceramics containing NaLaF4 nanocrystals
2016
Abstract Oxyfluoride glasses 16Na 2 O–9NaF–5LaF 3 –7Al 2 O 3 –63SiO 2 (mol%) activated with 3% terbium, dysprosium, praseodymium and neodymium fluorides have been prepared and studied by differential thermal analysis, cathodoluminescence, X-ray induced luminescence, X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectroscopy. We found out that the presence of crystalline phase enhances the X-ray induced luminescence intensity. X-ray induced luminescence is the most intense for the sample activated with terbium and treated at 700 °C, whereas the praseodymium and neodymium activated samples have the fastest decay times.