Search results for "Titan"
showing 10 items of 1109 documents
Ti-Al Membranes for Microfiltration
2016
Porous membranes made of Ti – 48 at. % Al intermetallic compound was obtained by elemental powder synthesis. These disks can be used as microfiltration membranes due to their low pores size and interconnected porosity. During this study titanium (purity 99.5%) and aluminum (purity 99 %) with low particle size range were mixed in corresponding ratios. The powder mixture was pressed at 500 MPa and the samples were heat treated in two stages. In the first step is the forming of Al3Ti compound by a solid state reaction at a temperature of 640 °C, slightly below the melting point of aluminum. In the second step the Ti-Al compound was formed at the temperature of 1300 °C and the sintering the por…
In vitro preliminary study of osteoblast response to surface roughness of titanium discs and topical application of melatonin
2014
Objectives: To observe human osteoblast behavior cultured in vitro on titanium discs (Ti) in relation to surface roughness and melatonin application. Study Design: Human osteoblasts (MG-63) were cultured on 60 Ti6Al4V discs divided into three groups: Group I: discs treated with dual acid etching; Group II dual acid etching and blasting with calcium phosphate particles; Group III (control) machined discs. Surface roughness and topography of the discs were examined with scanning electron microscope (SEM) and confocal laser scanning electron microscope( CLSM). Osteoblast adhesion, proliferation and cell morphology were determined by means of fluorescence microscopy with Image-Pro Plus software…
Perovskite thin films grown by direct liquid injection MOCVD
2007
Abstract The continuous scaling down of devices dimensions, in silicon technology, imposes to replace silicon dioxide. Among the potential candidates for new capacitors, some perovskite structure materials (such as titanate or zirconate) show interesting characteristics. The first way to develop perovskite films is to use a mixture of two β-diketonates by varying the solution's cationic ratio. However, our previous results on SrZrO3 showed that a wide parametric study had to be carried on. Another way is to design novel heterometallic precursors that contain both cations on the same molecule. The ligands could be chosen so that peculiar evaporation and decomposition temperatures could be ob…
Development of dark Ti(C,O,N) coatings prepared by reactive sputtering
2008
Accepted manuscript
Alumina particle reinforced TiO2 composite films grown by direct liquid injection MOCVD
2014
Abstract The use of a liquid injection delivery system to form composite films containing nanoparticles was investigated. Al 2 O 3 –TiO 2 films were grown on silicon substrates by direct liquid injection MOCVD (DLI-MOCVD) at 400 °C. The α-Al 2 O 3 nanoparticles (α-Al 2 O 3 NPs) dispersed in TiO 2 films resulted from co-deposition using colloidal α-Al 2 O 3 solution and titanium tetraisopropoxide as titanium precursor. Scanning electron microscopy coupled with EDS as well as Raman spectroscopy confirmed the presence of α-Al 2 O 3 NPs aggregates embedded in the TiO 2 matrix. The liquid injection system coupled with CVD technique can be promising to form composite films containing preformed na…
Correlation Between the Electrical Properties and the Morphology of Low-Pressure MOCVD Titanium Oxynitride Thin Films Grown at Various Temperatures
2000
Titanium oxynitride (TiN x O y ) thin films were deposited by low-pressure metal-organic CVD (LP-MOCVD) on (100) silicon, sapphire, and polycrystalline alumina substrates. Titanium isopropoxide (TIP) and ammonia were used as precursors. The influence of the growth temperature, ranking from 450°C to 750°C, was investigated by scanning electron microscopy (SEM), and electrical DC measurements. Rutherford back-scattering (RBS) measurements were used to determine the N/O ratio in the films. The surface observations of the deposited films showed two morphological transitions. The resistivity decreased with the growth temperature, while the nitrogen content increased. Moreover, for the highest de…
Spinel-mullite composites with optical properties
1997
The aim of this paper was to study the synthesis and characterization of spinel-containing mullite based materials, using sol-gel techniques. Several gels were prepared, with nominal compositions 3(Al2−2xMx TixO3)·2SiO2 and 3(Al2−xMxO3)·2SiO2, with M=Ni+2 or Co+2 and 0.0≤x≤0.2, by hydrolysis and condensation of mixtures of aluminum, silicon and titanium alkoxides and nickel chloride. Dried gels were homogeneous and displayed a glass transition at around 750°C, which indicated that the system could be described as an amorphous silicoaluminate network.
Aluminum oxide/titanium dioxide nanolaminates grown by atomic layer deposition: Growth and mechanical properties
2017
Atomic layer deposition (ALD) is based on self-limiting surface reactions. This and cyclic process enable the growth of conformal thin films with precise thickness control and sharp interfaces. A multilayered thin film, which is nanolaminate, can be grown using ALD with tuneable electrical and optical properties to be exploited, for example, in the microelectromechanical systems. In this work, the tunability of the residual stress, adhesion, and mechanical properties of the ALD nanolaminates composed of aluminum oxide (Al2O3) and titanium dioxide (TiO2) films on silicon were explored as a function of growth temperature (110-300 C), film thickness (20-300 nm), bilayer thickness (0.1-100 nm),…
Initial stages of TiO2 thin films MOCVD growth studied by in situ surface analyses
2005
Abstract In situ chemical surface analyses using X-ray photoelectron spectroscopy (XPS) were performed to understand the initial stages of TiO 2 thin-film MOCVD growth. Deposits on Si (1 0 0), a few nanometres thick, were obtained at a fixed temperature of 650 °C and for two different pressures, 2.9 and 0.05 mbar, using titanium tetraisopropoxide (TTIP) as precursor. Pressure lowering led to a higher deposit growth rate. Reduction of titanium with respect to stoichiometric titanium dioxide and oxidation of the wet-cleaned silicon substrate are observed from decomposition of the Ti 2p and Si 2p peaks. The formation of a TiSi x O y mixed oxide is also pointed out and confirmed by the presence…
Anti-bacterial activity of graphene oxide as a new weapon nanomaterial to combat multidrug-resistance bacteria.
2016
Antibiotic resistance in microbial pathogens has become a serious health problem in the world. The increasing spread of hospital acquired infections especially in immunocompromised and cancer patients caused by multidrug-resistant (MDR) microbial pathogens is restricting the choices for impressive antibiotic therapy. So many efforts have been made to develop new compounds with antimicrobial activity. In recent years, nanoparticles, particularly graphene oxide (GO) nanoparticles have found many applications in various fields, including antibacterial action, pathogens bio detection, cancer therapy, and drug and gene delivery. The use of graphene oxide as an antibacterial agent for the treatme…