Search results for "Toe"
showing 10 items of 3824 documents
Location of holes in silicon-rich oxide as memory states
2002
The induced changes of the flatband voltage by the location of holes in a silicon-rich oxide (SRO) film sandwiched between two thin SiO 2 layers [used as gate dielectric in a metal-oxide-semiconductor (MOS) capacitor] can be used as the two states of a memory cell. The principle of operation is based on holes permanently trapped in the SRO layer and reversibly moved up and down, close to the metal and the semiconductor, in order to obtain the two logic states of the memory. The concept has been verified by suitable experiments on MOS structures. The device exhibits an excellent endurance behavior and, due to the low mobility of the holes at low field in the SRO layer, a much longer refresh …
Impedance of space-charge-limited currents in organic light-emitting diodes with double injection and strong recombination
2006
The impedance model for a one-carrier space-charge-limited (SCL) current has been applied to explain some experimental features of double carrier organic light-emitting diodes. We report the analytical model of impedance of bipolar drift transport in SCL regime in the limit of infinite recombination. In this limit the ac impedance function is identical to that of a single carrier device, with a transit time modified by the sum of mobilities for electrons and holes, μn+μp. The static capacitance C(ω→0) is a factor of ¾ lower than the geometric capacitance, as observed for single carrier devices, but it is shifted to higher frequencies. It follows that impedance measurements in the dual-carri…
Strongly-coupled PbS QD solids by doctor blading for IR photodetection
2016
Solution-processed QD solids are emerging as a novel concept for high-performance optoelectronic devices. In this work, doctor blading is proposed for the fabrication of strongly-coupled QD solids from a PbS nanoink for photodetection at telecom wavelengths. The key step of this procedure is the solid-state ligand exchange, which reduces the interparticle distance and increases the carrier mobility in the resulting strongly-coupled QD solid. This is accomplished by replacing the original long oleylamine molecules by shorter molecules like 3-mercaptopropionic acid, as confirmed by FTIR, TGA and XPS. Further, a detailed investigation with XPS confirms the air-stability of the QD solids and th…
Revealing the Electronic Structure and Optical Properties of CuFeO2 as a p-Type Oxide Semiconductor
2021
Delafossite CuFeO2 is a p-type oxide semiconductor with a band gap of ∼1.5 eV, which has attracted great interests for applications in solar energy harvesting and oxide electronics. However, there are still some discrepancies in the literature regarding its fundamental electronic structure and transport properties. In this paper, we use a synergistic combination of resonant photoemission spectroscopy and X-ray absorption spectroscopy to directly study the electronic structure of well-defined CuFeO2 epitaxial thin films. Our detailed study reveals that CuFeO2 has an indirect and d-d forbidden band gap of 1.5 eV. The top of the valence band (VB) of CuFeO2 mainly consists of occupied Fe 3d sta…
Temperature Dependent Quantum Efficiencies in Multicrystalline Silicon Solar Cells
2015
Abstract Several field studies comparing modules based on Elkem Solar Silicon ® (ESS ® ) cells with reference modules based on non-compensated virgin polysilicon show that the compensated ESS ® modules outperform the reference modules with comparable installed capacity under certain operating conditions. At high temperatures and high irradiation conditions the modules based on compensated silicon produce more energy than the reference modules. In order to increase the understanding of the observed effect cells are studied at different temperatures by the means of IV-characteristics as well as quantum efficiencies. Quantum efficiency measurements show that the main difference between ESS ® c…
Si Donor Incorporation in GaN Nanowires
2015
With increasing interest in GaN based devices, the control and evaluation of doping are becoming more and more important. We have studied the structural and electrical properties of a series of Si-doped GaN nanowires (NWs) grown by molecular beam epitaxy (MBE) with a typical dimension of 2-3 μm in length and 20-200 nm in radius. In particular, high resolution energy dispersive X-ray spectroscopy (EDX) has illustrated a higher Si incorporation in NWs than that in two-dimensional (2D) layers and Si segregation at the edge of the NW with the highest doping. Moreover, direct transport measurements on single NWs have shown a controlled doping with resistivity from 10(2) to 10(-3) Ω·cm, and a car…
Correlation between optical and transport properties of Ga-doped ZnO thin films prepared by pulsed laser deposition
2006
Abstract In this paper we report on the correlation between the transport and optical properties of Ga-doped ZnO films epitaxially grown on C-oriented sapphire substrates by means of pulsed laser deposition. Thin films with electron concentrations ranging between 10 20 and 10 21 cm −3 were prepared from targets containing 0.25–5 at.% Ga. The Ga content in the thin films was estimated by XPS, from the ratio between the intensities of the 2p peaks of Ga and Zn. The electron concentration in the films is very close to the Ga content for films prepared from low Ga content targets even at high deposition temperature. For Ga contents in the target larger than 1%, the Ga content in the films incr…
Acoustic manipulation of electron-hole pairs in GaAs at room temperature
2004
We demonstrate the optically detected long-range (>100 μm) ambipolar transport of photogenerated electrons and holes at room temperature by surface acoustic waves (SAWs) in (In,Ga)As-based quantum well structures coupled to an optical microcavity. We also show the control of the propagation direction of the carriers by a switch composed of orthogonal SAW beams, which can be used as a basic control gate for information processing based on ambipolar transport.
Surface Coatings Based on Polysilsesquioxanes: Solution-Processible Smooth Hole-Injection Layers for Optoelectronic Applications
2009
Optoelectronic devices usually consist of a transparent conductive oxide (TCO) as one electrode. Interfacial engineering between the TCO electrode and the overlying organic layers is an important method for tuning device performance. We introduce poly(methylsilsesquioxane)-poly(N,N-di-4-methylphenylamino styrene) (PMSSQ-PTPA) as a potential hole-injection layer forming material. Spin-coating and thermally induced crosslinking resulted in an effective planarization of the anode interface. HOMO level (-5.6 eV) and hole mobility (1 × 10(-6) cm(2) · Vs(-1) ) of the film on ITO substrates were measured by cyclovoltammetry and time-of-flight measurement demonstrating the hole injection capabili…
From monolayer to multilayer N-channel polymeric field-effect transistors with precise conformational order
2012
Monolayer field-effect transistors based on a high-mobility n-type polymer are demonstrated. The accurate control of the long-range order by Langmuir-Schafer (LS) deposition yields dense polymer packing exhibiting good injection properties, relevant current on/off ratio and carrier mobility in a staggered configuration. Layer-by-layer LS film transistors of increasing thickness are fabricated and their performance compared to those of spin-coated films.