Search results for "ZIRCONIUM"
showing 10 items of 303 documents
Mechanical Stresses: Inhibitor of Catalyst of High Temperature Oxidation?
2001
Oxidation of metals is a complex reaction in which mechanical and chemical phenomena occur. A dynamic and macroscopic model is developed in order to simulate oxidation kinetics of a metal. It includes the stress/diffusion coupling in the bulk and the interfacial phenomena at metal/oxide interface. Its application to the Zr/ZrO 2 system shows the important role of stress field distribution in oxide on kinetic behavior. According to the sign of stress gradient in the oxide scale, the oxidation rate can speed up or slow down. The calculated kinetic curves could he fitted using a k p .t 1/n law where n and kp vary all over the process, like for the experimental kinetic curves.
MOCVD deposition of YSZ on stainless steels
2003
Abstract Yttria stabilized zirconia was deposited on stainless steel using the metal–organic chemical vapor deposition (MOCVD) technique, from β-diketonate precursors. The variation of the evaporation temperatures of yttrium and zirconium precursor allowed to control the level of Y within the film. Over the temperature range 125–150 °C, the Y content increased from 2.5 to 17.6 at.%. X-ray diffraction (XRD) analyses evidenced tetragonal phase of zirconia when the Y content was below 8 at.%, and cubic phase for higher concentration. Sputtered neutral mass spectrometry (SNMS) profiles confirmed that the control and stability of Y precursor temperature were of major importance to guarantee the …
Mechanical properties of aluminum, zirconium, hafnium and tantalum oxides and their nanolaminates grown by atomic layer deposition
2015
ABSTRACT The mechanical properties of two different metal oxide nanolaminates comprised of Ta 2 O 5 and Al 2 O 3 , HfO 2 or ZrO 2 , grown on soda–lime glass substrate by atomic layer deposition, were investigated. Ta 2 O 5 and Al 2 O 3 layers were amorphous, whereas ZrO 2 and HfO 2 possessed crystalline structure. Thickness of single oxide layers was varied between 2.5 and 15 nm. The total thickness of the laminate structures was in the range of 160–170 nm. The hardness values of single layer oxides on glass ranged from 6.7 GPa (Ta 2 O 5 ) to 9.5 GPa (Al 2 O 3 ). Corresponding elastic moduli were 96 GPa and 101 GPa. The hardnesses of laminates were in the range of 6.8–7.8 GPa and elastic mo…
Microstructure of Fe–ZrSiO4 solid solutions prepared from gels
2012
Abstract Microstructural changes associated with chemical and structural evolution from gels to Fe x –ZrSiO 4 solid solutions are reported. Mineralizer-free Fe x –ZrSiO 4 gels in the compositional range 0 ≤ x ≤ 0.15 were prepared by sol–gel liquid-phase route from mixtures of alkoxides of silicon and zirconium, and iron (III) acetylacetonate, and annealed at different temperatures and/or times. The first step on the whole process to the final Fe x –ZrSiO 4 solid solutions was the formation of aggregated of tetragonal Fe-doped ZrO 2 nanocrystals with diameters smaller than 50 nm. At this stage the tetragonal Fe–ZrO 2 were embedded in amorphous silica resulting nanocomposite materials. The …
Synthesis and characterization of V2O5SiO2ZrO2 pigments by sol-gel method
1992
Abstract Polymeric gels in the V2O5 SiO2 ZrO2 system were prepared from tetraethylorthosilicate (TEOS), zirconium(IV)-n-propoxide and vanadium(IV) oxyacetylacetonate, precursors. The effects of prehydrolysis time of TEOS and drying gel method on the stabilization of tetragonal zirconia in the silica amorphous matrix, nucleation and growth of the zircon (ZrSiO4) phase, and stabilization of the blue and green stains of vanadium zircon were studied. Results provide evidence that long time of prehydrolysis and fast drying do not favour zircon crystallization but stabilize the tetragonal zirconia in the amorphous matrix.
Lattice dynamics of superconducting zirconium and hafnium nitride halides
2003
We have performed a study of the Raman active modes of β-HfNCl, β-ZrNCl, and β-ZrNBr and Na-doped β-HfNCl in various scattering configurations. The experimental values are compared with a lattice dynamical calculation andassigned to definite atomic motions. The variation of the atomic force constants are analyzed as a function of the bond length, relating their relative strength with the atomic characteristics of the compound.
Transient collisionally excited X-ray laser in nickel-like zirconium pumped with the PHELIX laser facility
2004
A transient collisionally excited X-ray laser has been put into operation using the front end of the PHELIX laser system as a pump laser. Strong lasing at 22 nm has been observed in nickel-like zirconium.
Microstructural Evolution from Praseodymium-Containing Zircon Gels to Prx-ZrSiO4 Solid Solutions
2012
Structural evolution and coupled microstructural transformations occurred on annealing mineralizer-free Pr-containing ZrSiO4 gels up to final praseodymium-doped zircon yellow pigments are reported. Gels with nominal compositions Prx-ZrSiO4, 0 ≤ x ≤ 0.125, were prepared from mixtures of zirconium and silicon alkoxides and praseodymium acetylacetonate. Crystallization pathway and microstructural changes of thermally treated dried gels were followed by infrared spectroscopy, X-ray diffraction, field emission scanning and transmission electron microscopies, respectively. Results indicated that the crystallization pathway through the whole process of final Prx-ZrSiO4 solid solutions formation di…
Synthesis and characterization of praseodymium-containing ZrSiO4 solid solutions from gels
2011
Abstract The preparation and characterization of a series of praseodymium–zircon solid solution (Prx–ZrSiO4) materials with increasing nominal amounts of Pr is reported. Pr-doped zircon gels were prepared by gelling mixtures of zirconium n-propoxide, praseodymium acetylacetonate and tetraethylorthosilicate, and annealed over the range of temperature up to the formation of Pr–zircon solid solutions. The reaction sequence was followed by X-ray powder diffraction (XRD), ultraviolet–visible diffuse reflectance (DR) and infrared spectroscopy (IR). The first crystalline phase detected on annealing gels was a tetragonal praseodymium-containing ZrO2 phase (t-Pr–ZrO2). On further annealing, the subs…
Flash synthesis of zirconia nanoparticles by microwave forced hydrolysis
2001
Forced hydrolysis preparation of zirconia sols and powders by microwave heating of zirconium tetrachloride solutions at temperatures equal to 180 °C leads in a few minutes to monodispersed nanoscale zirconia particles. Synthesis was performed in a microwave reactor called the RAMO system. This microwave reactor was designed by the authors. This flash-synthesis process combines the advantages of forced hydrolysis (homogeneous precipitation) and microwave heating (very fast heating rates). The sols and powders were characterized by x-ray diffraction,photon correlation spectroscopy (PCS), small-angle x-ray scattering, and transmission electron microscopy. Sols are colloidally stable, which mea…