Search results for "Zirconia"
showing 10 items of 144 documents
Candida albicans biofilms on different materials for manufacturing implant abutments and prostheses
2019
[EN] Background: Morphological, physical and chemical properties of both implants and prostheses can determine the biofilm formation on their surface and increase the risk of biological complications. The aim of this study was to evaluate the capacity of biofilm formation of Candida albicans on different materials used to manufacture abutments and prostheses. Material and Methods: Biofilm formation was analyzed on cp grade II titanium, cobalt-chromium alloy and zirconia, silicone, acrylic resin (polymethylmethacrylate) and nano-hybrid composite. Some samples were partially covered with lithium disilicate glass ceramic to study specifically the junction areas. C. albicans was incubated in a …
The effect of wear on the tetragonal-to-monoclinic transformation and the residual stress distribution in zirconia-toughened alumina cutting tools
1998
Abstract Zirconia-toughened alumina cutting tools have been examined after machining an AISI 1040 steel. The Raman spectrum of zirconia and the fluorescence spectrum from alumina have been used to determine the extent of the tetragonal-to-monoclinic (t-m) transformation and the residual stresses in and around the worn-out crater, respectively. Although about 15% vol. m-zirconia is present even in a brand new cutting tool, it was shown that the crater region undergoes the t-m transformation up to 40% vol. In both cases, the transformed zone is concentrated near the surface. The residual stresses in alumina are slightly compressive in the new cutting tool and away from the crater region, but …
Comparative X-ray diffraction study of the crystalline microstructure of tetragonal and monoclinic vanadium–zirconium dioxide solid solutions produce…
2009
The microstructural characteristics of solid solutions, prepared by heating dried gel precursors with nominal compositions VxZr1−xO2(0 ≤x≤ 0.1) at 723 and 1573 K, were determined from X-ray diffraction patterns. The crystalline microstructure of the resulting specimens, characterized by a prevalent crystallite shape, a volume-weighted crystallite size distribution and a second-order lattice strain distribution, was found to depend on the vanadium content. A characteristic feature of all size distributions was their bimodality, explained as a result of transformations between tetragonal and monoclinic phases during thermal treatment. A comparative study of the microstructure of both zirconia…
Effect of surface treatments with acid solutions on the surface roughness of an Yttrium-Tetragonal Zirconia Polycrystal.
2017
Background The purpose of this in vitro study was to evaluate the effect of conventional surface treatment with acid solutions on the surface roughness of a zirconia-based ceramic. Material and methods Specimens of yttrium-tetragonal zirconia polycrystal (Y-TZP) -based ceramic were fabricated (5.0 x 5.0 x 2.0 mm, n=40). The specimens were submitted to the tested surface treatment method and divided into 4 groups (n=10): no treatment-control (GI), airborne 110 µm aluminum oxide particle abrasion for 1 minute-conventional method (GII); etching with 48% hydrofluoric acid for 2 minutes (GIII), and nitric acid/hydrofluoric acid etching for 2 minutes (GIV). The surface roughness (Ra) test was per…
Soft Tissue Healing at One-Piece Zirconia Implants Compared to Titanium and PEEK Implants of Identical Design: A Histomorphometric Study in the Dog
2013
This study aimed to histomorphometrically evaluate the soft tissue reactions of one-piece zirconia implants versus titanium implants in regard to their insertion depth. Four one-piece implants of identical geometry were inserted on each side of six mongrel dogs: an uncoated zirconia implant, a zirconia implant coated with a calcium liberating titanium oxide, a titanium implant, and an experimental implant made of a synthetic material. Using a split-mouth design, they were inserted in both submerged and nonsubmerged healing modes. After 4 months, dissected blocks were stained with toluidine blue to histologically assess the marginal portion of the implant mucosa, apical extension of the barr…
Are Metal-Free Monolithic Crowns the Present of Prosthesis? Study of Mechanical Behaviour
2019
Purpose: To analyze in vitro the mechanical behavior of five types of complete coverage crowns fabricated from different materials. Materials and methods: Seventy-five full coverage crowns were divided into five groups according to material: Group I, metal core with feldspathic ceramic covering (MC- control group)
Performances of Three Layered Ceramic Composites Inserts for Steel Cutting
1999
Sandwich-structured three-layered ceramic inserts were made with the aim of obtaining ceramic cutting tools with an increased useful life.
Resistive state relaxation time in ZrO2(Y)-based memristive devices under the influence of external noise
2022
The effects of external digitally synthesized Gaussian noise on the resistive state relaxation time of a ZrO2(Y)-based memristive device when switching from a low resistance state to a high resistance state have been experimentally investigated. A nonmonotonic dependence of the resistive state relaxation time on the external noise intensity is found. This behavior is interpreted as a manifestation of the noise-enhanced stability effect previously observed in various complex systems with metastable states. It is shown that the experimental results agree satisfactorily with the theoretical ones. The presented results indicate the constructive role of external noise and its possible use as a m…
Marginal and Internal Precision of Zirconia Four-Unit Fixed Partial Denture Frameworks Produced Using Four Milling Systems
2021
Background: CAD/CAM systems enable the production of fixed partial dentures with small and reproducible internal and marginal gaps. Purpose: The purpose of this study was to evaluate the reproducibility of the marginal and internal adaptations of four-unit fixed partial denture frameworks produced using four CAD/CAM systems. Materials and Methods: Prepared dies of a master model that simulated the loss of the first left molar were measured. Fifteen frameworks were manufactured using four CAD/CAM systems (A–D). The internal fit was determined by the replica technique, and the marginal gap was determined by microscopy. ANOVA was carried out to detect significant differences, and the Bonferron…
Morphology, mechanical properties and thermal degradation kinetics of PMMA-zirconia nanocomposites prepared by melt compounding
2012
Zirconia nanoparticles were synthesized by means of a sol-gel method and embedded in poly(methyl methacrylate) (PMMA) by melt compounding. The zirconia was well dispersed in the PMMA matrix, with only a few clusters, especially for the highest investigated zirconia content. NMR results showed heteronuclear dipolar interactions involving the carbons and the surrounding hydrogen nuclei. The effect of the amount of zirconia, in the range of 1–5!wt%, on the thermomechanical properties and thermal degradation kinetics of PMMA was also investigated by means of dynamic mechanical analysis (DMA), thermogravimetric analyses (TGA), and Fourier-transform infrared spectroscopy (FTIR). The presenc…