Search results for "bioengineering"
showing 10 items of 1963 documents
Biogas production and saccharification of Salix pretreated at different steam explosion conditions.
2011
Abstract Different steam explosion conditions were applied to Salix chips and the effect of this pretreatment was evaluated by running both enzymatic hydrolysis and biogas tests. Total enzymatic release of glucose and xylose increased with pretreatment harshness, with maximum values being obtained after pretreatment for 10 min at 210 °C. Harsher pretreatment conditions did not increase glucose release, led to degradation of xylose and to formation of furfurals. Samples pretreated at 220 and 230 °C initially showed low production of biogas, probably because of inhibitors produced during the pretreatment, but the microbial community was able to adapt and showed high final biogas production. I…
Biogas production from boreal herbaceous grasses – Specific methane yield and methane yield per hectare
2009
Abstract The objective of this study was to determine the specific methane yields of four grass species (cocksfoot, tall fescue, reed canary grass and timothy) cultivated under boreal conditions as well as how harvesting time and year of cultivation affects the specific methane yields per ha. The specific methane yields of all grasses and all harvests varied from 253 to 394 Nl CH4/kg volatile solids (VS) added. The average specific methane yield of the 1st harvest of all grasses was higher than the 2nd harvests. In this study the methane and energy yields from different harvest years were ranged from 1200 to 3600 Nm3 CH4/ha/a, corresponding from 12 to 36 MWh CH 4 /ha/a. The methane yield pe…
OVERVIEW OF ANALYTICAL PROCEDURES FOR FATTY AND RESIN ACIDS IN THE PAPERMAKING PROCESS
2012
This review describes the role of wood extractives, especially fatty and resin acids, in papermaking, as well as the importance of their removal from process waters. One of the main aims is also to illustrate versatile analysis methods for this purpose and highlight recent developments in corresponding applications. Most of the current methods require time-consuming and laborious sample pretreatment procedures prior to gas chromatography coupled either with flame ionization or mass selective detection. However, some faster, even online techniques with minimum sample pretreatment, are also available, mainly including high performance liquid chromatography coupled with mass spectrometry. The …
Organic material dissolved during oxygen-alkali pulping of hot-water-extracted spruce sawdust
2016
Untreated and hot-water-extracted (HWE) Norway spruce (Picea abies) sawdust was cooked using the sulfur-free oxygen-alkali (OA) method under the following conditions: temperature, 170 °C; liquor-to-wood ratio, 5:1 L/kg; and NaOH charge, 19% on the oven-dry sawdust. In comparison with earlier studies conducted with birch sawdust, the spruce cooking yield data, together with the amount of the pulp rejects (78% to 86% for reference pulps from the initial feedstock and 73% to 83% for pulps from the HWE feedstock), revealed that the pretreatment stage prior to spruce OA pulping caused different effects on pulping performance. The analyses of the three main compound groups (i.e., lignin, volatile…
Multivariate Correlation between Analysis Data on Dissolved Organic Material from Scots Pine (Pinus sylvestris) Chips and their Autohydrolysis Pre-Tr…
2013
Various chemometric techniques were used to establish the relationship between the autohydrolysis conditions prior to pulping and the chemical compositions of the soluble organic materials removed from Scots pine (Pinus sylvestris) wood chips. The aqueous chip pre-treatments (autohydrolysis) were administered at 130 °C and 150 °C for 30, 60, 90, and 120 min, and the hydrolysates obtained were characterized in terms of total carbohydrates (various mono-, oligo-, and polysaccharides together with uronic acid side groups), volatile acids (acetic and formic acids), lignin, and furans (furfural and 5-(hydroxymethyl)furfural). Based on the analytical data gathered, a relatively accurate model for…
Analysis of Trace Pharmaceuticals and Related Compounds in Municipal Wastewaters by Preconcentration, Chromatography, Derivatization, and Separation …
2014
A significant portion of pharmaceuticals and other organic chemicals consumed by people and animals are released into municipal wastewater treatment plants. Most of them are degraded during the wastewater treatment processes, but some of them degrade only partially and may be widely transported and dispersed into the aquatic environment. This is why efficient and fast analytical methods are needed for detection of organic compounds in wastewaters at trace levels. Because wastewaters often consist of complex matrices and high-molecular mass materials, e.g., lignocellulosic biomass, which may bring challenges to the sample preparation procedures, efficient pre-concentration methods such as so…
Characterization of Hardwood Soda-AQ Lignins Precipitated from Black Liquor through Selective Acidification
2016
In the development of integrated biorefinery process alternatives to produce value-added by-products, various black liquors from sulfur-free pulping processes offer potential feedstocks for recovering their main chemical constituents, lignin and aliphatic carboxylic acids. In this study, lignin fractions were obtained from silver birch (Betula pendula) soda-anthraquinone black liquor by carbonation (pH to about 8.5) or by acidification (pH to about 2) with H2SO4 after carbonation or directly. These fractions were characterized by Fourier transform infrared (FTIR), ultraviolet (UV), energy dispersive X-ray fluorescence (ED XRF), and 13C nuclear magnetic resonance (13C NMR) spectroscopy. In a…
Co-digestion of sewage sludge and sterilized solid slaughterhouse waste: Methane production efficiency and process limitations
2012
The rendering product of Category 2 and 3 Animal By-Products is known as sterilized mass (SM) and it is mainly composed of fat and proteins, making it interesting substrate for anaerobic digestion. Batch and semi-continuous laboratory experiments were carried out to investigate the effect of SM addition in co-digestion with sewage sludge on methane production and possible process limitations. Results showed that SM addition in the feed mixture up to 5% (w/w), corresponding to 68.1% of the organic loading, increased methane production 5.7 times, without any indication of process inhibition. Further increase of SM addition at 7.5% (w/w) caused methane production decrease and volatile solids r…