Search results for "composite"
showing 10 items of 4584 documents
Incorporation of Silica Nanospherical Particles into Epoxy-Amine Crosslinked Materials
2008
Composites of silica nanospheres coated with crosslinked epoxy–amine were synthesised and examined by 29Si-magic-angle-spinning nuclear magnetic resonance spectroscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The most representative fact is that epoxy-modified nanospheres lost less weight at high temperatures. At temperatures greater than 300°C the loss of weight for epoxy-modified nanospheres was rather lower than for unmodified nanospheres. This helped them to retain their structures, as the loss of weight can have adverse effects on network defects, due to the loss of crosslinks by unit of volume.
Radiation curing of diacrylate glycerolate of bisphenol-A in the presence of an organically modified montmorillonite for the production of flame-resi…
2006
Polymerization of an acrylate derivative of bisphenol-A by ionizing radiation in the presence of an organically modified montmorillonite was carried out in order to produce a flame-retardant composite. The measurement of the thermal effect during irradiation indicates that radiation curing of pure resin and resin-clay mixtures occurred in both cases. Moreover, differential scanning calorimetry and dynamic mechanical thermal analysis showed that a curing completion can be obtained by thermal curing after irradiation with a significant increase of the glass transition temperature. The morphology was investigated by X-ray diffraction and transmission electron microscopy. These have indicated t…
Nanocomposites based on esterified colophony and halloysite clay nanotubes as consolidants for waterlogged archaeological woods
2017
We have designed an innovative protocol for the consolidation of waterlogged archaeological woods by using acetone mixtures of halloysite clay nanotubes and a chemically modified colophony (Rosin). Firstly, we have investigated the thermal properties of HNTs/Rosin nanocomposites, which have been prepared by means of the casting method from acetone. The HNTs content have been systematically changed in order to study the influence of the inorganic filler on the thermal stability and glass transition process of Rosin. We have observed that the thermal properties of the hybrids are affected by the specific HNTs/Rosin interactions. Then, acetone dispersions of HNTs/Rosin composites at variable f…
Synthesis and characterisation of a ternary composite of polyaniline, reduced graphene-oxide and chitosan with reduced optical band gap and stable aq…
2019
A ternary composite comprising of p-toluene sulfonic acid doped polyaniline (PANI), chitosan and reduced graphene oxide (RGO) with stable aqueous dispersibility has been synthesised via oxidative polymerisation of aniline in chitosan/RGO dispersion. For comparison; PANI, PANI/chitosan and PANI/RGO composites were also synthesised using the same procedure. FTIR, Raman, XPS, XRD and UV-VIS confirmed the successful synthesis of the PANI and the composites. The aqueous dispersions of the PANI/chitosan and the ternary composites were found to be stable even after more than four months. The stability of the dispersion was attributed to the polycationic nature of the chitosan. The thermogravimetri…
A new eco-friendly chemical treatment of natural fibres: Effect of sodium bicarbonate on properties of sisal fibre and its epoxy composites
2016
Abstract Several researchers have shown how sisal fibres possess remarkable tensile properties that yield them good candidates as reinforcement in biocomposite materials. This work aims to evaluate the effect of an eco-friendly and cost effective surface treatment method based on the use of commercial sodium bicarbonate (i.e. baking soda) on properties of sisal fibre and its epoxy composites. In particular, raw sisal fibres were treated with a 10%w/w of sodium bicarbonate solution for different periods (24, 120 and 240 h), at room temperature. Changes occurring in sisal fibres were characterized through scanning electron microscope, Fourier transform infrared spectroscopy, thermogravimetric…
Preparation, characterization and in vitro test of composites poly-lactic acid/hydroxyapatite scaffolds for bone tissue engineering.
2018
Abstract In this work, the possibility to produce composite Poly-L-lactic acid (PLLA)/Hydroxyapatite (HA) porous scaffolds via Thermally Induced Phase Separation (TIPS) for bone tissue engineering applications was investigated. Several PLLA/HA wt/wt ratios (95/5, 90/10, 70/30, 50/50, 34/66) were tested and the as-obtained scaffolds were characterized via Scanning Electron Microscopy, Wide Angle X-Ray Diffraction, Thermogravimetric analysis, Gas Pycnometry, Differential Scanning Calorimetry and mechanical compression test. Morphological analysis revealed an open structure with interconnected pores and HA particles embedded in the polymer matrix. Finally, cell cultures were carried out into t…
Artichoke (Cynara cardunculus L.) fibres as potential reinforcement of composite structures
2011
Abstract The aim of this paper is to examine the use of artichoke fibres as potential reinforcement in polymer composites. The fibres are extracted from the stem of artichoke plant, which grows in Southern Sicily. In order to use these lignocellulosic fibres as potential reinforcement in polymer composites, it is fundamental to investigate their microstructure, chemical composition and mechanical properties. Therefore, the morphology of artichoke fibres was investigated through electron microscopy, the thermal behaviour through thermogravimetric analysis and the real density through a helium pycnometer. The chemical composition of the natural fibres in terms of cellulose, lignin, and ash co…
Carbon nanotubes-based nanohybrids for multifunctional nanocomposites
2017
In the present work, nano-hybrids based on carbon nanotubes (CNTs) bearing immobilized, either through covalent linkage and physical absorption, commercial anti-oxidant molecules have been formulated and used as nanofillers in Ultra High Molecular Weight Polyethylene (UHMWPE), aiming at preparing multifunctional nanocomposites. The effective immobilization of the anti-oxidant molecules has been probed by spectroscopic and thermogravimetric analyses. The study of the morphology and the rheological behaviour of the nanocomposites show that the immobilization of anti-oxidant molecules onto the CNTs surface is beneficial for the state of the polymer/nanoparticles interfacial region. Additionall…
Sepiolite-reinforced epoxy nanocomposites: Thermal, mechanical, and morphological behavior
2010
A bisphenol A-based epoxy resin was modified with pristine sepiolite and an organically surface-modified sepiolite and thermally cured using two different curing agents: an aliphatic and a cycloaromatic diamine. The nanocomposites were characterized by dynamic mechanical analysis (DMA), rheology, thermogravimetric analysis (TGA), and electron microscopy. The initial sepiolite–epoxy mixtures show a better dispersion for the sepiolite-modified system that forms a percolation network structure. Mechanical properties have also been determined. The flexural modulus of the epoxy matrix slightly increases by the incorporation of the organophilic sepiolite. The flexural strength of the sepiolite-mo…
Modification of polyoxymethylene for increased thermal resistance
2017
Ternary nanocomposites, composed of polyoxymethylene (POM), ethylene octene copolymer and zinc oxide (ZnO), are prepared by melt compounding. The effects of two types of ethylene-octene copolymers, differing with α-octene content (38% for EOC38 and 17% for EOC17), as well as nanostructured ZnO on thermal behavior of POM are investigated. The content of EOC in the POM based composites is varied between 10 and 50 wt%, while the content of ZnO is 2 wt%. Thermal behavior of POM based systems are studied by using differential scanning calorimetry and thermogravimetric analysis coupled with Fourier transform infrared spectroscopy. Results of thermogravimetric analysis show that, by rising either …