Search results for "conductors"
showing 10 items of 254 documents
Faceting and structural anisotropy of nanopatterned CdO(110) layers
2005
CdO(110) layers with a self-organized surface structure have been grown on (10math0) sapphire (m plane) substrates by metal-organic vapor phase epitaxy. The epitaxial relationships between layer and substrate have been determined and a crystallographic model that accounts for the CdO in-plane orientation, which results in a reduced lattice mismatch when the CdO[001] direction is perpendicular to the sapphire c axis, has been proposed. Although the measured lattice parameters indicate that the layers are almost fully relaxed, an anisotropic mosaicity is detected with symmetrical rocking curves attaining minimum values when measured along the CdO[math10] direction. The layer morphology consis…
Nanoscale membrane electrode assemblies based on porous anodic alumina for hydrogen–oxygen fuel cell
2007
In this paper, we demonstrate that nanoscale membrane electrode assemblies, functioning in a H 2/O 2 fuel cell, can be fabricated by impregnation of anodic alumina porous membranes with Nafion® and phosphotungstic acid. Porous anodic alumina is potentially a promising material for thin-film micro power sources because of its ability to be manipulated in micro-machining operations. Alumina membranes (Whatman, 50 μm thick, and pore diameters of 200 nm) impregnated with the proton conductor were characterized by means of scanning electron microscopy, X-ray diffraction, and thermal analysis. The electrochemical characterization of the membrane electrode assemblies was carried out by recording t…
Hybrid organic-inorganic light-emitting diodes.
2011
The demonstration of colour tunability and high efficiency has brought organic light-emitting diodes (OLEDs) into the displays and lighting market. However, high production costs due to expensive deposition techniques and the use of reactive materials still limit their market entry, highlighting the need for novel concepts. This has driven the research towards the integration of both organic and inorganic materials into devices that benefit from their respective peculiar properties. The most representative example of this tendency is the application of metal oxides in organic optoelectronics. Metal oxides combine properties such as high transparency, good electrical conductivities, tuneable…
Self-Assembled Monolayer-Functionalized Half-Metallic Manganite for Molecular Spintronics
2012
(La,Sr)MnO(3) manganite (LSMO) has emerged as the standard ferromagnetic electrode in organic spintronic devices due to its highly spin-polarized character and air stability. Whereas organic semiconductors and polymers have been mainly envisaged to propagate spin information, self-assembled monolayers (SAMs) have been overlooked and should be considered as promising materials for molecular engineering of spintronic devices. Surprisingly, up to now the first key step of SAM grafting protocols over LSMO surface thin films is still missing. We report the grafting of dodecyl (C12P) and octadecyl (C18P) phosphonic acids over the LSMO half-metallic oxide. Alkylphosphonic acids form ordered self-a…
Formation and Rupture of Schottky Nanocontacts on ZnO Nanocolumns
2007
In this paper, the electrical transport and mechanical properties of Pt/ZnO Schottky nanocontacts have been studied simultaneously during the formation and rupture of the nanocontacts. By combining multidimensional conducting scanning force spectroscopy with appropriated data processing, the physical relevant parameters (the ideality factor, the Schottky barrier height, and the rupture voltage) are obtained. It has been found that the transport curves strongly depend on the loading force. For loading forces higher than a threshold value, the transport characteristics are similar to those of large-area Schottky contact, while below this threshold deviations from strictly thermionic emission …
Domain wall induced modulation of low field H-T phase diagram in patterned superconductor-ferromagnet stripes
2019
We present a systematic study of the magnetic domain wall induced modulation of superconducting transition temperature (Tc) in Nb/Ni bilayer stripes. By varying the thickness of the Ni layer from 20 nm to 100 nm we have been able to measure the low field Tc-H phase diagram spanning the Neel domain wall and Bloch domain wall range of thicknesses. Micromagnetic simulations and magnetic force microscopy measurements confirmed a stronger out-of-plane stray field in the Bloch domain walls compared to the Neel walls. A suppression in Tc was observed in the magnetization reversal region of the Ni film, the magnitude of which followed linearly to the strength of the out-of-plane stray field due to …
Solvothermal synthesis derived Co-Ga codoped ZnO diluted magnetic degenerated semiconductor nanocrystals
2018
Authors kindly acknowledge to the Estonian Research Council ( PUT1096 , IUT2-25 , PUT735 ), the Estonian Centre of Excellence in Research project “Advanced materials and high-technology devices for sustainable energetics, sensorics and nanoelectronics (TK141), and the financial support of HZB. We are grateful to the staff of BESSY II for the assistance and co-operation during the synchrotron-based measurements.
Regional blood flow in deep structures of the brain measured in acute cat experiments by means of a new beta-sensitive semiconductor needle detector.
1967
Regional cerebral blood flow was measured by means of isotope clearance with a new type of solid state beta-sensitive needle detector (diameter 0.9 mm) introduced into the brain tissue in acute cat experiments. The flow values obtained within the cortex were compared with values recorded above the same cortical region with the same needle detector, or with a small GM-tube. The insertion of the needle detector into the brain tissue gave rise to injury (checked histologically) which deformed the clearance curves in a manner suggesting that the normal circulation had been destroyed within the tissue from which the measurements were made.
CsPbX3/SiOx (X = Cl, Br, I) monoliths prepared via a novel sol-gel route starting from Cs4PbX6 nanocrystals
2019
We developed a facile synthesis of nanocomposite powders of CsPbX3 nanocrystals (NCs) embedded in silica. The synthesis starts from colloidal Cs4PbX6 NCs that are mixed with tetraethyl orthosilicate in the presence of nitric acid, which triggers the sol-gel reaction yielding the formation of SiOx and the conversion of starting NCs into CsPbX3 ones. The overall reaction delivers CsPbX3 NCs encased in a silica matrix. The resulting CsPbX3/SiOx nano-composite powders exhibited enhanced moisture and thermal stability in air. Also, when mixing different CsPbX3/SiOx samples having diverse anion compositions, no interparticle anion exchange processes were observed, which is a further indication th…
Energy and charge transfer in nanoscale hybrid materials.
2015
Hybrid materials composed of colloidal semiconductor quantum dots and π-conjugated organic molecules and polymers have attracted continuous interest in recent years, because they may find applications in bio-sensing, photodetection, and photovoltaics. Fundamental processes occurring in these nanohybrids are light absorption and emission as well as energy and/or charge transfer between the components. For future applications it is mandatory to understand, control, and optimize the wide parameter space with respect to chemical assembly and the desired photophysical properties. Accordingly, different approaches to tackle this issue are described here. Simple organic dye molecules (Dye)/quantum…