Search results for "detectors"
showing 10 items of 2229 documents
Experimental evidence of high spatial confinement of elastic energy in a phononic cantilever
2021
We report on experimental high spatial confinement of elastic energy in a silicon phononic cantilever for which the quality factor of a higher-order flexural resonance is increased by a factor of 27 (from Q ∼ 80 to Q ∼ 2130) with the use of a three-row phononic crystal (PnC) strip. As shown by numerical simulations performed with the finite element method, the PnC both reduces anchor loss and confines elastic energy inside the cantilever. The PnC and the cantilever are fabricated with standard clean room techniques on a silicon on insulator substrate. Optical measurements of the out-of-plane displacements are performed with a laser scanning interferometer in a frequency range around 2 MHz.
Strong chiral dichroism and enantiopurification in above-threshold ionization with locally chiral light
2021
We derive here a highly selective photoelectron-based chirality-sensing technique that utilizes “locally chiral” laser pulses. We show that this approach results in strong chiral discrimination, where the standard forwards/backwards asymmetry of photoelectron circular dichroism (PECD) is lifted. The resulting dichroism is larger and more robust than conventional PECD (especially in the high-energy part of the spectrum), is found in all hemispheres, and is not symmetric or antisymmetric with respect to any symmetry operator. Remarkably, chiral dichroism of up to 10% survives in the angularly integrated above-threshold ionization (ATI) spectra, and chiral dichroism of up to 5% survives in the…
High-power pulsed dye laser with Fourier-limited bandwidth
1986
A high-peak-power, narrow-linewidth light source with a homogeneous beam profile has been constructed by modifications to a commercially available pulsed-dye-laser system. Output pulses of up to 10 mJ were generated with linewidths of about 50 MHz for 12-nsec pulses. The pulse-to-pulse frequency stability was better than the linewidth, and the center frequency could be scanned over a frequency range of 142.5 GHz at a wavelength of 600 nm. The performance of the system was demonstrated by observing the 6s2 1S0–6s7s1S0 transition in atomic mercury at 2λ = 312.8 nm and the 6s2S1/2–8s2S1/2 transition in atomic gold at 2λ = 308.9 nm using up to 1 mJ of frequency-doubled output for two-photon non…
Charge Transport in Trap-Sensitized Infrared PbS Quantum-Dot-Based Photoconductors: Pros and Cons
2018
Control of quantum-dot (QD) surface chemistry offers a direct approach for the tuning of charge-carrier dynamics in photoconductors based on strongly coupled QD solids. We investigate the effects of altering the surface chemistry of PbS QDs in such QD solids via ligand exchange using 3-mercaptopropionic acid (MPA) and tetrabutylammonium iodide (TBAI). The roll-to-roll compatible doctor-blade technique was used for the fabrication of the QD solid films as the photoactive component in photoconductors and field-effect phototransistors. The ligand exchange of the QD solid film with MPA yields superior device performance with higher photosensitivity and detectivity, which is due to less dark cur…
Planar Array Technology for the Fabrication of Germanium X-Ray Microcalorimeters
2008
Several technologies are presently competing for measuring the temperature increase in cryogenic micro-calorimeters used as high resolution energy-dispersive X-ray detectors. Doped germanium, whose resistivity depends on temperature, is a promising material for this purpose, because of its comparatively low specific heat and the possibility of making wafers with high doping uniformity by neutron transmutation. Presently, Ge-based microcalorimeters are still micro-machined and manually assembled. Here we present a planar approach to the fabrication of 2-D arrays of microcalorimeters and show the preliminary technological results.
Planar Technology for NDT-Ge X-Ray Microcalorimeters: Absorber Fabrication
2009
We have investigated the electroplating process to deposit thick uniform films of tin on a Ge wafer coated with Spin‐On Glass, in order to fabricate the absorbers for Ge microcalorimeter arrays. Here we discuss some technological details and propose two alternative metal bilayer to be used as seed for the electroplating.
Effects of the Buffer Layers on the Performances of (Al,Ga)N Ultraviolet Photodetectors
2004
The fabrication of (Al,Ga)N-based metal–semiconductor–metal (MSM) photovoltaic detectors requires the growth of high-quality (Al,Ga)N films. Inserting a low-temperature deposited buffer layer enables the growth of an epitaxial layer with a reduced density of defects. Two structures using GaN and AlN buffer layers have been deposited by low-pressure metalorganic chemical vapor deposition and used to fabricate MSM interdigitated detectors. The devices have been characterized to investigate the effects of the buffer layers on the detector performances.
Ultra-broad spectral photo-response in FePS3 air-stable devices
2021
Van der Waals materials with narrow energy gaps and efficient response over a broadband optical spectral range are key to widen the energy window of nanoscale optoelectronic devices. Here, we characterize FePS as an appealing narrow-gap p-type semiconductor with an efficient broadband photo-response, a high refractive index, and a remarkable resilience against air and light exposure. To enable fast prototyping, we provide a straightforward guideline to determine the thickness of few-layered FePS nanosheets extracted from the optical transmission characteristics of several flakes. The analysis of the electrical photo-response of FePS devices as a function of the excitation energy confirms a …
A Penning Trap for Studying Cluster Ions
1986
We propose to use a Penning trap for spectroscopy of stored cluster ions. A similar device has been built for the purpose of mass measurements of short-lived nuclei produced at the on-line isotope separator ISOLDE/CERN. A resolving power of 500,000 in a mass measurement of39K and an accuracy of 2 × 10−7 for the85Rb/39K mass ratio were obtained. An efficiency for in-flight capture as high as 70% was achieved. The method provides very high sensitivity since typically only 10 to 100 ions are stored in the trap. We intend to perform laser spectroscopy on trapped Na clusters as a first application of the trap technique.
Polarized neutron reflectivity from monolayers of self-assembled magnetic nanoparticles
2015
We prepared monolayers of iron oxide nanoparticles via self-assembly on a bare silicon wafer and on a vanadium film sputter deposited onto a plane sapphire substrate. The magnetic configuration of nanoparticles in such a dense assembly was investigated by polarized neutron reflectivity. A theoretical model fit shows that the magnetic moments of nanoparticles form quasi domain-like configurations at remanence. This is attributed to the dipolar coupling amongst the nanoparticles.