Search results for "electron spectroscopy"
showing 10 items of 525 documents
Effect of annealing on Zn1−xCoxO thin films prepared by electrodeposition
2009
Polycrystalline thin films of Zn"1"-"xCo"xO with different cobalt (Co) content were grown on indium tin oxide (ITO) substrates by cathodic electrodeposition technique and subsequently annealed in air at 400^oC. The effect of annealing in their structural, optical and chemical properties has been characterized by X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Raman scattering and optical spectroscopy. Our measurements indicate that moderate annealing increases the crystal quality of the films. The films are highly transparent in the visible range and evidence an increase of the band gap and of the intensity of three typical Co absorptio…
Surface modifications induced by pulsed-laser texturing—Influence of laser impact on the surface properties
2014
Abstract Laser cleaning technology provides a safe, environmentally friendly and very cost effective way to improve cleaning and surface preparation of metallic materials. Compared with efficient cleaning processes, it can avoid the disadvantages of ductile materials prepared by conventional technologies (cracks induced by sand-blasting for example) and treat only some selected areas (due to the optical fibers). By this way, laser technology could have several advantages and expand the range of thermal spraying. Moreover, new generations of lasers (fiber laser, disc laser) allow the development of new methods. Besides a significant bulk reduction, no maintenance, low operating cost, laser f…
Structural, electronic, and electrical properties of an Undoped n-Type CdO thin film with high electron concentration
2014
Transparent conducting metal oxides (TCOs) combine the properties of optical transparency in the visible region with a high electrical conductivity. They are a critical component as the window electrode in liquid crystal and electroluminescent display devices, as well as in many designs of solar cells now under development. Sn-doped In2O3 is currently the most important TCO, but it suffers from some drawbacks. These include the high cost of indium, weak optical absorption in the blue-green region, as well as chemical instability that leads to corrosion phenomena in organic light-emitting devices. Indium tin oxide (ITO) films are also brittle and of relatively low durability. A number of oth…
A comparative analysis of electron spectroscopy and first-principles studies on Cu(Pd) adsorption on MgO
2006
Ultrathin MgO films were grown on a W(1 1 0) substrate while metastable impact electron (MIES) and photoelectron (UPS) spectra were measured in situ; apart from the valence band emission, no additional spectral features were detected. The oxide surface was exposed to metal atoms (Cu, Pd) at RT. A comparison with the DOS extracted from first-principles DFT calculations shows that the metal-induced intensity developing above the top of the O 2p valence band in the UP spectra under Cu(Pd) exposure is caused by Cu 3d (Pd 4d) emission. The emission seen in the MIES spectra is attributed to the ionization of Cu 3d and 4s states of adsorbed neutral Cu atoms in an Auger process, Auger neutralizatio…
Stoichiometry-related Auger lineshapes in titanium oxides: Influence of valence-band profile and of Coster-Kronig processes
2004
International audience; The ability to determine the nature and the occurrence of defects is a central need of ceramic surface chemistry. In titanium oxides, the Ti-LMV Auger decays line shape is very sensitive to the titanium degree of oxidation, and has long been empirically used as a qualitative probe of the stoichiometry. In the present work, resonant Auger and resonant valence-band measurements at the Ti-L2,3 edges in TiO2, TiO2–x and metallic titanium provide a clear evidence that the evolutions of the Ti-LMV Auger line shape are due to drastic changes in the valence-band profile and in the probability of L2L3V Coster-Kronig decay processes when a fraction of titanium ions is reduced.…
Surface investigation of plasma HMDSO membranes post-treated by CF4/Ar plasma
2002
Fluorination treatment has been performed on polysiloxane membranes using a plasma glow discharge of a gases mixture CF4 and argon (plasma enhanced chemical vapor deposition). Atomic force microscopy, XPS analyses and contact angle measurements have been undertaken to explain the surface transformation and behavior, which strongly depend on the morphology, the composition and the hydrophilic/hydrophobic character of the plasma-polymerized initial membranes. Main result is that fluorination, which leads to hydrophobic membranes, has a more relevant effect on amorphous silica-like membranes than on polymer-like ones, according to their chemical composition whereas the plasma surface reaction …
TiO2/Ag2O immobilized on cellulose paper: A new floating system for enhanced photocatalytic and antibacterial activities
2021
Paper-TiO2-Ag2O floating photocatalysts were produced under mild condition and their photocatalytic activity for the degradation of aromatic amine under sunlight stimulant was investigated. Characterizations by Raman, XRD, XPS, DRS and PL confirmed the presence of TiO2 and Ag2O, and the morphology of the appended TiO2/Ag2O layer was probed by FE-SEM. The photocatalytic activity of the prepared samples was investigated by the degradation of aniline (AN) in water under simulated sun-light illumination and constrained conditions, i.e. non-stirring and non-oxygenation. The presence of Ag2O combined with TiO2 was shown to improve the resistance of paper to bacteria attack, thus increasing the du…
Surface passivation of gallium selenide by nitrogen implantation
2002
In this paper we report on the characterization of nitrogen-implanted single-crystal GaSe samples. Nitrogen atoms were implanted at 80 keV, with doses ranging from 4 × 10 13 to 10 15 N + ions cm -2 . Next, samples were aged in open air and characterized by small-area XPS, together with an unimplanted clean surface, in order to quantify the effects of the nitrogen implantation. In general, we found that the oxidation was fully prevented in N + -implanted samples.
Zerstörungsfreie Phasenanalyse dünner Oberflächenschichten mittels Konversionselektronen
1987
By use of an appropriate gamma radiation, conversion electrons may be produced by Mossbauer effect also in a depth below the sample surface deeper than the free path for inelastic electron scattering. Because the Mossbauer spectrum of the conversion electrons reflects the local phase composition, the recording of all electrons escaping from the surface allows an integral phase analysis of a layer of some 10–100 nm thickness. If only electrons within a narrow range of energy are recorded, a depth selective phase analysis is possible. The applicability of these two techniques of conversion electron spectroscopy is demonstrated by a few examples concerning oxidation and passivation of steel. C…
Structural characterization of Pd-Ag and Pd-Cu bimetallic catalysts by means of EXAFS, WAXS and XPS
2000
Bimetallic Pd-Ag and Pd-Cu pumice-supported catalysts have been synthesized following different preparation procedures with the aim of improving the selectivity and reactivity of monometallic Pd/pumice systems. The structural characterization, carried out by X-ray Diffraction, X-ray Absorption and X-ray Photoelectron Spectroscopy, allowed to investigate the importance of the preparation procedures in the alloy formation.