Search results for "element"
showing 10 items of 13601 documents
BEM analysis of a piezoelectric structural health monitoring system for delamination detection
2013
In the present work a piezoelectric based structural health monitoring (SHM) system is analyzed with the aim of assessing the ability of the piezoelectric patch to detect both edge and embedded delaminations proper of flange-skin composite laminated structures. he boundary element model is developed for piezoelectric solids and is implemented by taking advantage of the multidomain technique to model laminated and cracked configurations. A non-linear spring model interface is then implemented in conjunction with an iterative procedure allowing for the simulation of the finite stiffness of the bonding layers as well as of the non-penetration condition of the delamination surfaces. he dynamic …
Removal of silicon from CFB-derived fly ash leachate in the context of phosphorus recovery
2018
High concentrations of dissolved silica in the acid leachate impose two major challenges on precipitation based recovery of phosphorus (P). Firstly, co-precipitation of colloidal silica in the acidic regimes decreases the purity and value of precipitated P-products. In addition, silica scaling on internal surfaces of equipment is also a problematic issue in industrial operations. Therefore, removal of dissolved silica prior to P-recovery process minimizes the risks of Si-contamination in P-products and Si-scaling. In the present study, silica removal was achieved by accelerated silica polymerization with higher acidity and ionic strength of mineral acid, which also assisted the leaching of …
Microscratch testing method for systematic evaluation of the adhesion of atomic layer deposited thin films on silicon
2016
The scratch test method is widely used for adhesion evaluation of thin films and coatings. Usual critical load criteria designed for scratch testing of coatings were not applicable to thin atomic layer deposition (ALD) films on silicon wafers. Thus, the bases for critical load evaluation were established and the critical loads suitable for ALD coating adhesion evaluation on silicon wafers were determined in this paper as LCSi1, LCSi2, LCALD1, and LCALD2, representing the failure points of the silicon substrate and the coating delamination points of the ALD coating. The adhesion performance of the ALD Al2O3, TiO2, TiN, and TaCN+Ru coatings with a thickness range between 20 and 600 nm and dep…
Structural and electronic elucidation of a N-heterocyclic silylene vanadocene adduct
2017
The solid and solution state structure of the vanadium(II) N‐ heterocyclic silylene (NHSi) complex, [(SiIPr)V(Cp)2] (1) is reported ( SiIPr: 1,3‐bis(2,6‐diisopropylphenyl)‐1,3‐diaza‐2‐silacyclopent‐4‐ en‐2‐ylidene). The electronic structure of 1 is probed using combination of magnetic measurements, EPR spectroscopy and computational studies. The V–Si bond strength and complex forming mechanism between vanadocene and NHSi ligand is elucidated using computational methods. peerReviewed
Improved pairwise comparison transitivity using strategically selected reduced information
2021
To judge the mutual relationship among elements, pairwise comparisons (PC) are widely used in decision modelling. PC is especially useful when the involved elements are intangible. Frequently, the number of elements to be compared may be very large. When dealing with n elements, the number of PCs is, under the reciprocity hypothesis, n(n − 1)/2. PCs are compiled in so-called pairwise comparison matrices (PCM). In the presence of missing entries due to uncertainty or lack of information, decision-making must be performed from the available incomplete information. Making all the comparisons in the complete case may be tedious, strenuous and time-consuming for the actors, may blur the body of …
Soil inoculation with symbiotic microorganisms promotes plant growth and nutrient transporter genes expression in durum wheat
2015
In a field experiment conducted in a Mediterranean area of inner Sicily, durum wheat was inoculated with plant growth-promoting rhizobacteria (PGPR), with arbuscular mycorrhizal fungi (AMF), or with both to evaluate their effects on nutrient uptake, plant growth, and the expression of key transporter genes involved in nitrogen (N) and phosphorus (P) uptake. These biotic associations were studied under either low N availability (unfertilized plots) and supplying the soil with an easily mineralizable organic fertilizer. Regardless of N fertilization, at the tillering stage, inoculation with AMF alone or in combination with PGPR increased the aboveground biomass yield compared to the uninocula…
Aluminum tri-isopropoxide as an alternative precursor for atomic layer deposition of aluminum oxide thin films
2019
Due to the safety challenges associated with the use of trimethylaluminum as a metal precursor for the deposition of alumina, different chemicals have been investigated over the years to replace it. The authors have investigated the use of aluminum tri-isopropoxide (TIPA) as an alternative alkoxide precursor for the safe and cost-effective deposition of alumina. In this work, TIPA is used as a stable Al source for atomic layer deposition (ALD) of Al2O3 when different oxidizing agents including water, oxygen plasma, water plasma, and ozone are employed. The authors have explored the deposition of Al2O3 using TIPA in ALD systems operating in vacuum and atmospheric pressure conditions. For the…
Photoelectron emission experiments with ECR-driven multi-dipolar negative ion plasma source
2017
Photoelectron emission measurements have been performed using a 2.45 GHz ECR-driven multi-dipolar plasma source in a low pressure hydrogen discharge. Photoelectron currents induced by light emitted from ECR zone and H− production region are measured from Al, Cu, Mo, Ta, and stainless steel (SAE 304) surfaces as a function of microwave power and neutral hydrogen pressure. The total photoelectron current from the plasma chamber wall is estimated to reach values up to 1 A for 900 W of injected microwave power. It is concluded that the volumetric photon emission rate in wavelength range relevant for photoelectron emission is a few times higher in arc discharge. peerReviewed
Fracture and fatigue of titanium narrow dental implants: New trends in order to improve the mechanical response
2019
Sixty-four fractured commercially pure titanium (cp-Ti) narrow dental implants (NDIs) with similar macrogeometry and connection designs were studied after different implantation times in humans in order to determine their reliability and to evaluate the causes of the fracture. These NDIs were compared with other similar implants, made with alloyed titanium with 15% Zr and with 12% strained titanium. Original implants were tested under static and fatigue conditions, simulating the tri-axial loads in the mouth by means of a Bionix hydraulic test machine. Fractography was studied using field-emission scanning electron microscopy (FSEM). The results showed that cp-Ti NDI exhibits low strength f…
Self-healing, luminescent metallogelation driven by synergistic metallophilic and fluorine–fluorine interactions
2020
Square planar platinum(ii) complexes are attractive building blocks for multifunctional soft materials due to their unique optoelectronic properties. However, for soft materials derived from synthetically simple discrete metal complexes, achieving a combination of optical properties, thermoresponsiveness and excellent mechanical properties is a major challenge. Here, we report the rapid self-recovery of luminescent metallogels derived from platinum(ii) complexes of perfluoroalkyl and alkyl derivatives of terpyridine ligands. Using single crystal X-ray diffraction studies, we show that the presence of synergistic platinum-platinum (PtMIDLINE HORIZONTAL ELLIPSISPt) metallopolymerization and f…