Search results for "fabrication"
showing 10 items of 460 documents
Interfacial Modification for High-Efficiency Vapor-Phase-Deposited Perovskite Solar Cells Based on a Metal Oxide Buffer Layer.
2018
Vacuum deposition is one of the most technologically relevant techniques for the fabrication of perovskite solar cells. The most efficient vacuum-based devices rely on doped organic contacts, compromising the long-term stability of the system. Here, we introduce an inorganic electron-transporting material to obtain power conversion efficiencies matching the best performing vacuum-deposited devices, with open-circuit potential close to the thermodynamic limit. We analyze the leakage current reduction and the interfacial recombination improvement upon use of a thin (<10 nm) interlayer of C60, as well as a more favorable band alignment after a bias/ultraviolet light activation process. This wo…
Excitonic States in Semiconducting Two-dimensional Perovskites
2018
Hybrid organic/inorganic perovskites have emerged as efficient semiconductor materials for applications in photovoltaic solar cells with conversion efficiency above 20 \%. Recent experiments have synthesized ultra-thin two-dimensional (2D) organic perovskites with optical properties similar to those of 2D materials like monolayer MoS$_2$: large exciton binding energy and excitonic effects at room temperature. In addition, 2D perovskites are synthesized with a simple fabrication process with potential low-cost and large-scale manufacture. Up to now, state-of-the-art simulations of the excitonic states have been limited to the study of bulk organic perovskites. A large number of atoms in the …
Cutting Conditions and Work Material State Identification through Acoustic Emission Methods
1992
Summary This paper examines the problem of in-process monitoring of metal cutting operations carried out on aluminum alloys for aeronautical applications. Turning tests were conducted on annealed and heat treated aluminum alloy bars, using carbide tools. For both work material conditions, different combinations of cutting parameters were used. During cutting tests, acoustic emission (AE) and cutting force sensor data were detected and processed. The comparison between AE responses from the annealed and heat treated aluminum alloys allowed, with the help of force sensor data, to verify the applicability of AE and sensor fusion techniques for in-process and real time identification of work ma…
Electroplated Indium Bumps as Thermal and Electrical Connections of NTD-Ge Sensors for the Fabrication of Microcalorimeter Arrays
2012
We are developing a method to build arrays of Ge-based microcalorimeters for soft X-rays detection using micro-photolithographic techniques. A key element of the process is the electrical and thermal connection between the germanium sensors and the interconnection electrical tracks, that lay on a substrate acting as mechanical support and thermal sink. The geometry of the sensors, that have a square base truncated pyramid shape, makes feasible a connection through indium soldering. We describe a technique, based on microlithography and electroplating, adopted to grow indium bumps of a few tens of square microns of area and several microns high on top of the contact pads patterned on the sub…
Structural Characterization of Molecular Interface Layers Using Neutron and X-Ray Reflectivity Techniques
1992
Synthetic microstructures used in biological research today include a variety of different systems that serve very diverse purposes and require very different fabrication and characterization techniques. One class of microstructures that is at the boundary between life and materials sciences, and certainly has been associated closer to the latter in the past, is that of molecularly structured planar interface films. In fact, Langmuir-Blodgett (LB) films,1 i.e. molecularly layered films comprised of amphiphatic organic molecules on solid substrates, have been used for many years as model systems for the investigation of molecular interactions between chromophores or donor/ acceptor couples, …
Large 256-Pixel X-ray Transition-Edge Sensor Arrays With Mo/TiW/Cu Trilayers
2015
We describe the fabrication and electrical characterization of 256-pixel X-ray transition-edge sensor (TES) arrays intended for materials analysis applications. The processing is done on 6-in wafers, providing capabilities on a commercial scale. TES films were novel proximity coupled Mo/TiW/Cu trilayers, where the thin TiW layer in between aims to improve the stability of the devices by preventing unwanted effects such as Mo/Cu interdiffusion. The absorber elements were electrodeposited gold of thickness 2 μm. The single-pixel design discussed here is the so-called Corbino geometry. Most design goals were successfully met, such as the critical temperature, thermal time constant, and transit…
Chemical Bath Deposition as a Simple Way to Grow Isolated and Coalesced ZnO Nanorods for Light-Emitting Diodes Fabrication
2018
A way to grow and characterize isolated and coalesced ZnO nanorods on $p$ -GaN/sapphire structure is presented. Chemical bath deposition can be used to grow ZnO nanorods of device-quality, simply controlling the duration time of the growth process and the concentration of the nutrient solution in the bath. Increasing the duration of the process, as well as the concentration of the solution, leads to compact and sound layers instead of separated nanorods. However, too high concentrations stop the growth process. Light-emitting diodes fabricated on these ZnO-p-GaN heterostructure have a peak of electroluminescence at 400 nm and exhibit interesting electrical and optical properties. Optical po…
Additive manufacturing, new elaboration technique of metallic materials : impact of the microstructure on high temperature durability of AISI 316L st…
2021
Additive Manufacturing (AM) processes are able to elaborate, in a single step, metallic parts with very complex geometry, as close as possible to their final dimensions, based on 3D CAD model. Despite a very large number of studies on AM parameters, very few studies report on the high temperature behavior of the metallic materials produced by these processes. This thesis work evaluates the impact of the Selective Laser Melting (SLM) process on the high temperature durability of the austenitic stainless steel AISI 316L, commercial grade widely used in the industry. For this purpose, the reactivity of SLM samples was studied in different conditions (atmosphere, temperature, isothermal or cycl…
Impact of structural irregularities on high-bite-rate pulse compression techniques in photonics crystal fibre
2008
International audience; The impact of structural irregularities on high bit rate pulse compression techniques is evaluated in photonic crystal fibre. Specifically, more robust pulse compression to longitudinal fluctuations in the normal dispersion regime is reported. The physical limits of these pulse compression techniques in the presence of dispersion fluctuations are identified and the fact that state-of-the-art fabrication tolerances are sufficient for future experimental applications is confirmed.
Micro-Raman investigation of X or gamma irradiated Ge doped fibers
2011
International audience; Micro-Raman spectra have been recorded on Ge doped optical fibers before and after 10 keV-X or c-ray irradiation up to doses of 1 MGy (X-ray) or 7.8 MGy (-ray). Our data provide evidence that, at such dose levels, the glass matrix is not modified in a detectable way. We observed that varying the Ge doping levels from 0 to about 11 wt.%, X or radiation sensitivity of the overall matrix remains unchanged. Such results are observed for fibers obtained with drawing conditions within the usual range used for the fabrication of specialty fibers as radiation-tolerant waveguides. Our data support the potentiality of fiberbased sensors using glass properties, e.g. Raman sc…