Search results for "fouling"
showing 10 items of 150 documents
PERFORMANCE OF A MBR PILOT PLANT SUBJECT TO A GRADUAL SALINITY INCREASE: ANALYSIS OF BIOKINETIC AND FOULING BEHAVIOR
2013
Membrane bioreactors (MBRs) have been widely used for the treatment of various wastewater, including municipal, industrial, landfill leachate (Wintgens et al., 2005). Such systems generally provide decisive advantages compared to conventional activated sludge (CAS) processes: in particular, they feature high quality effluent, small footprint and low sludge production rates (Stephenson et al., 2000). In recent years MBRs have also been used for the treatment of specific saline water, such as wastewater produced from shipboard activities, aquaculture wastewater or wastewater deriving by sediment washing treatment, as an example. However, when subject to salinity, a modification of biomass cha…
A comprehensive integrated membrane bioreactor model for greenhouse gas emissions
2018
Abstract A comprehensive integrated membrane bioreactor (MBR) model for wastewater treatment is here proposed. The model quantifies the main biological and physical processes. The model describes the biological removal of organic matter, nitrogen and phosphorus including greenhouse gases (carbon dioxide, CO 2 and nitrous oxide, N 2 O). The model takes into account the following main innovative aspects jointly: i. Two-step nitrification process; ii. N 2 O formation due to ammonia-oxidizing bacteria as a product of the hydroxylamine oxidation (NH 2 OH) and of the nitrite (NO 2 − ) reduction; iii. Soluble microbial product (SMP) formation/degradation due to microbial growth and endogenous resp…
Membrane bioreactors for treatment of saline wastewater contaminated by hydrocarbons (diesel fuel): An experimental pilot plant case study
2016
Abstract The paper reports the main results of an experimental campaign performed on a membrane bioreactor pilot plant designed to treat synthetic shipboard slops. The experimental campaign was divided into two phases: salinity acclimation up to 20 g NaCl L −1 (Phase I) and hydrocarbon (diesel fuel) dosing (Phase II). The observed results show that the carbon removal was not severely affected by the wastewater features. Conversely, respirometric tests showed that nitrification was strongly affected by the salinity (33% of nitrification efficiency at 20 g NaCl L −1 – Phase I) as a result of the salinity in the autotrophic biomass. Moreover, the sludge viscosity increased during Phase II due …
Performance of a MBR pilot plant treating high strength wastewater subject to salinity increase: Analysis of biomass activity and fouling behaviour
2013
Membrane bioreactors produce high quality effluents that could be suitable for reuse. However, when treating high strength wastewater subject to a salinity increase, a modification of biomass characteristics may occur. This circumstance is of importance, since it can have a significant impact in terms of biokinetic as well as fouling behaviour. The aim of the study was to evaluate the performance of a pilot plant MBR, in terms of biomass activity and membrane fouling, fed with high strength synthetic wastewater, when subject to a salinity increase. With normal salinity, the pilot plant showed high removal efficiencies and high biomass respiratory activity. On the other hand, the salinity in…
Sequential batch membrane bio-reactor for wastewater treatment: The effect of increased salinity
2016
In this work, a sequential batch membrane bioreactor pilot plant is investigated to analyze the effect of a gradual increase in salinity on carbon and nutrient removal, membrane fouling and biomass kinetic parameters. The salinity was increased by 2 g NaCl L-1 per week up to 10 g NaCl L-1. The total COD removal efficiency was quite high (93%) throughout the experiment. A gradual biomass acclimation to the salinity level was observed during the experiment, highlighting the good recovery capabilities of the system. Nitrification was also influenced by the increase in salinity, with a slight decrease in nitrification efficiency (the lowest value was obtained at 10 g NaCl L-1 due to lower nitri…
Treatment of Oily Wastewater with Membrane Bioreactor Systems
2017
The aim of the present work was to investigate the behavior of a membrane bioreactor (MBR) system for the treatment of oily wastewater. A bench scale MBR was fed with synthetic wastewater containing diesel fuel. Organic carbon, hydrocarbon and ammonium removal, kinetic constants, extracellular polymeric substances production, and membrane fouling rates were monitored. The MBR plant was operated for more than 200 days, and the results highlighted good carbon removal and nitrification, suggesting a sort of biomass adaptation to hydrocarbons. Membrane fouling analysis showed an increase in total resistance, likely due to hydrocarbons, which caused an irreversible fouling (pore blocking) mainly…
Performance of industrial scale hollow-fibre membranes in a submerged anaerobic MBR (HF-SAnMBR) system at mesophilic and psychrophilic conditions
2013
The aim of this work was to evaluate the effect of temperature on the performance of industrial hollow-fibre (HF) membranes treating urban wastewater in a submerged anaerobic MBR system (SAnMBR). To this end, a demonstration plant with two commercial HF ultrafiltration membrane modules (PURON®, Koch Membrane Systems, PUR-PSH31) was operated at 20, 25 and 33 °C. The mixed liquor total solid (MLTS) level was a key factor affecting membrane permeability (K). K was higher under psychrophilic than mesophilic conditions when operating at similar transmembrane fluxes and MLTS, because the biomass activity of the psychrophilic mixed liquor was lower than the mesophilic mixed liquor. Thus, lower ext…
Impact of graphitic carbon nitride nanosheets in mixed- matrix membranes for removal of heavy metals from water
2021
International audience; Removal of heavy metal ions from water is being a challenge and Polysulfone (PSf) membranes have shown great potential to remove them from contaminated solutions. In this work, the introduction of Graphitic carbon nitride nanosheets (g-C3N4) into PSf membranes was implemented to improve the permeability and separation performance of PSf membranes. g-C3N4 was incorporated into the membrane matrix via nonsolvent induced phase inversion method. The prepared mixed matrix membranes showed enhanced performances towards water filtration. The incorporation of g-C3N4 into the membrane matrix caused an increase in the desired physicochemical properties like hydrophilicity and …
Effect of C/N shock variation on the performances of a moving bed membrane bioreactor.
2015
Abstract The effect of a sharp variation of C/N ratio in a moving bed membrane bioreactor (MB-MBR) pilot plant treating high strength wastewater has been investigated. The experimental campaign was divided into two periods, each characterized by a different C/N ratio (namely, 2.5 and 15, Period 1 and Period 2, respectively). The MB-MBR system was analyzed in terms of organic carbon removal, nitrification efficiency, biokinetic activity and fouling behavior. The results showed that the nitrification process was severely affected by lower C/N value and by high concentration of ammonia. It was noticed an extensive stress effect on the autotrophic bacteria. Furthermore, it was observed an incre…
Nanostructured medical sutures with antibacterial properties
2014
Bacterial repellence in suture materials is a desirable property that can potentially improve the healing process by preventing infection. We describe a method for generating nanostructures at the surface of commercial sutures of different composition, and their potential for preventing biofilm formation. We show how bacteria attachment is altered in the presence of nanosized topographies and identify optimum designs for preventing it without compromising biocompatibility and applicability in terms of nanostructure robustness or tissue friction. These studies open new possibilities for flexible and cost-effective realization of topography-based antibacterial coatings for absorbable biomedic…