Search results for "nanotechnology"
showing 10 items of 9818 documents
Easy Method for the Transformation of Levulinic Acid into Gamma-Valerolactone Using a Nickel Catalyst Derived from Nanocasted Nickel Oxide
2019
Different nickel catalysts have been tested for the transformation of levulinic acid into &gamma
Comparative study of initial stages of copper immersion deposition on bulk and porous silicon
2013
Initial stages of Cu immersion deposition in the presence of hydrofluoric acid on bulk and porous silicon were studied. Cu was found to deposit both on bulk and porous silicon as a layer of nanoparticles which grew according to the Volmer-Weber mechanism. It was revealed that at the initial stages of immersion deposition, Cu nanoparticles consisted of crystals with a maximum size of 10 nm and inherited the orientation of the original silicon substrate. Deposited Cu nanoparticles were found to be partially oxidized to Cu2O while CuO was not detected for all samples. In contrast to porous silicon, the crystal orientation of the original silicon substrate significantly affected the sizes, dens…
Optical determination and identification of organic shells around nanoparticles: application to silver nanoparticles
2013
We present a simple method to prove the presence of an organic shell around silver nanoparticles. This method is based on the comparison between optical extinction measurements of isolated nanoparticles and Mie calculations predicting the expected wavelength of the Localized Surface Plasmon Resonance of the nanoparticles with and without the presence of an organic layer. This method was applied to silver nanoparticles which seemed to be well protected from oxidation. Further experimental characterization via Surface Enhanced Raman Spectroscopy (SERS) measurements allowed to identify this protective shell as ethylene glycol. Combining LSPR and SERS measurements could thus give proof of both …
Production of Phosphorescent Coatings on 6082 Aluminum Using Sr0.95Eu0.02Dy0.03Al2O4-δ Powder and Plasma Electrolytic Oxidation
2019
In this study, a new approach for producing phosphorescent aluminum coatings was studied. Using the plasma electrolytic oxidation (PEO) process, a porous oxide coating was produced on the Al6082 aluminum alloy substrate. Afterwards, activated strontium aluminate (SrAl2O4: Eu2+, Dy3+) powder was filled into the cavities and pores of the PEO coating, which resulted in a surface that exhibits long-lasting luminescence. The structural and optical properties were studied using XRD, SEM, and photoluminescence measurements. It was found that the treatment time affects the morphology of the coating, which influences the amount of strontium aluminate powder that can be incorporated into the coating …
Amino-Acid-Based Polymerizable Surfactants for the Synthesis of Chiral Nanoparticles
2016
Amino-acid-based chiral surfactants with polymerizable moieties are synthesized, and a versatile approach to prepare particles thereof with a chiral surface functionality is presented. As an example of an application, the synthesized particles are tested for their ability as nucleating agents in the enantioselective crystallization of amino acid conglomerate systems, taking rac-asparagine as a model system. Particles resulting from chiral surfactants with different tail groups are compared and the results demonstrate that only the chiral nanoparticles made of the polymerizable surfactant are able to act efficiently as nucleation agent in enantioselective crystallization.
Calcium silicate hydrates: Solid and liquid phase composition
2015
© 2015 Elsevier Ltd. This paper presents a review on the relationship between the composition the structure and the solution in which calcium silicate hydrate (C S H) is equilibrated. The silica chain length in C S H increases with the silicon concentration and the calcium content in the interlayer space with the calcium concentrations. Sodium and potassium are taken up in the interlayer space preferentially at low calcium concentrations and thus by low Ca/Si C S H. Aluminium uptake in C S H increases strongly at higher aluminium concentrations in the solution. At low Ca/Si aluminium substitutes silica in the bridging position at Ca/Si. > 1 aluminium is bound in TAH. Recently developed ther…
One pot light assisted green synthesis, storage and antimicrobial activity of dextran stabilized silver nanoparticles.
2014
Background Green synthesis of nanomaterials finds the edge over chemical methods due to its environmental compatibility. Herein, we report green synthesis of silver nanoparticles (Ag NPs) mediated with dextran. Dextran was used as a stabilizer and capping agent to synthesize Ag NPs using silver nitrate (AgNO3) under diffused sunlight conditions. Results UV–vis spectra of as synthesized Ag nanoparticles showed characteristic surface plasmon band in the range from ~405-452 nm. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) studies showed spherical Ag NPs in the size regime of ~50-70 nm. Face centered cubic lattice of Ag NPs was confirmed by powder X-ray diffraction (PXRD…
Preparation of polyelectrolyte-modified membranes for heavy metal ions removal
2017
ABSTRACTPolyethersulfone membranes were modified by polyelectrolyte (PE) multilayers, made of poly(allylamine hydrochloride) with poly(styrene sulfonate), to remove Cu2+, Zn2+ and Ni2+ heavy metal cations from aqueous solutions in a wide range of metal concentration (50–1200 ppm). After characterization of the modified membranes, the efficiency of the process was estimated for single heavy metal ions solution leading to high rejection rates (>90% for 50 ppm) and good adsorption capacities (7.0–8.5 mg cm−2) whatever the metal ion tested. The stability in time of the modified membranes was proved by repeating successive filtrations with the same membrane. The filtration process was also used …
FeOOH-modified clay sorbents for arsenic removal from aqueous solutions
2019
The presence of arsenic (As) in natural and anthropogenic soils causes severe pollution of groundwater due to its harmful carcinogenic effects. The present work describes the research activities for searching of appropriate innovative sorbents based on clay material for As sorption using iron oxy-hydroxide modification. Natural and manufactured clay was chosen for comparison of modification efficiency in order to obtain best sorption results for As(V). The results of pilot testing were obtained and the sorption was studied as a function of initial arsenic concentration. Obtained results indicate that modification of clay with Fe compounds significantly improves the sorption capacity of a ne…
Inorganic nanomaterials in the aquatic environment: behavior, toxicity, and interaction with environmental elements
2016
AbstractThe aim of this paper is to present characteristics, toxicity and environmental behavior of nanoparticles (NPs) (silver, copper, gold, zinc oxide, titanium dioxide, iron oxide) that most frequently occur in consumer products. In addition, NPs are addressed as the new aquatic environmental pollutant of the 21stcentury. NPs are adsorbed onto particles in the aquatic systems (clay minerals, fulvic and humic acids), or they can adsorb environmental pollutants (heavy metal ions, organic compounds). Nanosilver (nAg) is released from consumer products into the aquatic environment. It can threaten aquatic organisms with high toxicity. Interestingly, copper nanoparticles (Cu-NPs) demonstrate…