Search results for "polymers"
showing 10 items of 3567 documents
Blends of nylon 6 with a polyethylene functionalized by photooxidation
1990
An easy and cheap method to prepare functionalized polyethylene is reported in which polyethylene is photooxidized and then melt-blended with nylon. Structural, rheological, and mechanical modifications indicate that carbonyl, formed during photooxidation, and amine groups react giving rise to copolymers which stabilize the blends. Photooxidized polyethylene from waste could be very effective in preparing polyethylene/polyamide blends with improved properties. This new approach improves over current methods in which compatibilization of polyolefines and polyamides is mostly performed by reacting functionalized polyolefines with polyamides in molten state. The functionalization is achieved b…
Macromol. Chem. Phys. 21/2013
2013
Study of methyl methacrylate polymerization in the presence of rubbers
2001
Grafting of poly(methylmethacrylate) onto various unsaturated rubbers is described. The grafting is achieved through thermally initiated methylmethacrylate in-situ polymerization. The main features of the polymerization process, i.e. conversion vs. time, grafting to rubber and gel percentage, have been investigated. The chemical structure of the rubber influences the process: rubber with pendant unsaturations gives rise to higher level of grafting.
Densely packed semiflexible macromolecules in a rigid spherical capsule
2018
The ordering of semiflexible polymers with persistence length lp and contour length L confined in a sphere of radius R is studied by molecular dynamics simulations of a coarse-grained model. Monomer densities are chosen where the corresponding bulk lyotropic solution or melt is a well-ordered nematic, and purely repulsive walls of the rigid confining sphere are considered. It is found that polymers close to the walls are bent according to the curvature of the confining spheres with all their monomers in a few layers parallel to the sphere surface, whereas the remaining macromolecules closer to the sphere center have one chain end and their center of mass far from the surface. The latter cha…
Hyperbranched poly(glycolide) copolymers with glycerol branching points via ring-opening copolymerization
2015
Abstract Sn(Oct) 2 -catalyzed synthesis of hyperbranched poly(glycolide) copolymers with glycerol branching points in the backbone is possible via ring-opening multi-branching copolymerization (ROMBP) of glycolide and 5HDON (5-hydroxymethyl-1,4-dioxan-2-one). Using this strategy, well-defined and soluble branched polyesters with apparent molecular weights (M n ) in the range of 1300–2000 g mol −1 and varying comonomer content (5HDON/glycolide = 30:70–70:30) were obtained. 2D NMR spectroscopy, thermal analysis and MALDI-TOF mass spectrometry confirmed the successful incorporation of both monomers and the resulting branched structure. Multiple end group functionality offers the possibility fo…
Blends of poly(2,6-dimethyl-1,4-phenylene oxide) with styrene copolymers
1994
Binary blends of poly(2,6–dimethyl–1,4–phenylene oxide) (PPE) with various styrene copolymers were investigated. Poly(styrene–co–acrylonitrile) (SAN), poly[styrene–co–(methyl methacrylate)] (SMMA), poly[styrene–co–(acrylic acid)] (SAA) and poly[styrene–co–(maleic anhydride)] (SMA) are only miscible with PPE when the amount of comonomer is rather small. From calculated binary interaction densities it can be concluded that the strong repulsion between PPE and comonomer limits miscibility. In blends of PPE with SAN, as well as with ABS, the inter-facial tension between the blend components is significantly reduced upon addition of polystyrene–block–poly–(methyl methacrylate) diblock copolymers…
Pinned hybrid glass-flax composite laminates aged in salt-fog environment: Mechanical durability
2019
The aim of the present paper is to study the mechanical performance evolution of pinned hybrid glass-flax composite laminates under environment aging conditions. Hybrid glass-flax fibers/epoxy pinned laminates were exposed to salt-spray fog environmental conditions up to 60 days. With the purpose of assessing the relationship between mechanical performances and failure mechanisms at increasing aging time, single lap joints at varying joint geometry (i.e., hole diameter D and hole distance E from free edge) were characterized after 0 days (i.e., unaged samples), 30 days, and 60 days of salt-fog exposition. Based on this approach, the property&ndash
New concept in bioderived composites: Biochar as toughening agent for improving performances and durability of agave-based epoxy biocomposites
2021
Biocomposites are increasingly used in the industry for the replacement of synthetic materials, thanks to their good mechanical properties, being lightweight, and having low cost. Unfortunately, in several potential fields of structural application their static strength and fatigue life are not high enough. For this reason, several chemical treatments on the fibers have been proposed in literature, although still without fully satisfactory results. To overcome this drawback, in this study we present a procedure based on the addition of a carbonaceous filler to a green epoxy matrix reinforced by Agave sisalana fibers. Among all carbon-based materials, biochar was selected for its environment…
Simulation of Young’s moduli for hexagonal ZnO [0 0 0 1]-oriented nanowires: first principles and molecular mechanical calculations
2017
The authors thank A Gulans, B Polyakov and S Vlassov for stimulating discussions. This study has been supported by the ERA.Net RUS Plus project No. 237 Watersplit. AB, RE and SL acknowledge the financial support by the Russian Foundation for Basic Research (Grant No. 17-03-00130-a) and the assistance of the Saint Petersburg State University Computer Center in the accomplishment of high-performance computations.
Twin coarsening in CdTe(111) films grown on GaAs(100)
2006
Abstract We present a scanning force microscopy study of twin coarsening in CdTe(1 1 1) films grown on GaAs(1 0 0). Two types of CdTe(1 1 1) twins grow epitaxially and with equal probability on the long-range wavy surface structure developed by previous in situ annealing of the GaAs(1 0 0) substrate. Due to this initial substrate wavy structure, the grain coarsening during film growth leads to a quasi-one-dimensional rippled pattern. We propose a coarsening mechanism between twins driven by the formation of stacking faults.