Search results for "surface"

High-energy radiation processing, a smart approach to obtain PVP-graft-AA nanogels

2014

Abstract Poly(N-vinylpyrrolidone)-grafted-acrylic acid biocompatible nanogels (NGs) were prepared using an exiting industrial-type electron accelerator and setups, starting from semi-dilute aqueous solutions of a commercial PVP and the acrylic acid monomer. As a result, NGs with tunable size and structure can be obtained quantitatively. Sterility was also imparted at the integrated dose absorbed. The chemical structure of the NGs produced was confirmed through Fourier Transformer Infrared Spectroscopy (FT-IR). The molecular and physico-chemical properties of NGs, such as the hydrodynamic dimensions and surface charge densities, for various polymer and monomer concentrations in the irradiate…

Thermodynamics of Aqueous Poly(ethylene oxide)−Poly(propylene oxide)−Poly(ethylene oxide)/Surfactant Mixtures. Effect of the Copolymer Molecular Weig…

2004

A calorimetric study was performed to focus attention on the interactions between copolymers and anionic surfactants in aqueous solutions. Three aspects were analyzed: (1) the hydrophobicity of the surfactant, (2) the change of the copolymer molecular weight, and (3) the nature of the hydrophilicity of the copolymer. To this purpose, the family of sodium alkanoates (sodium octanoate through sodium dodecanoate) and the triblock copolymers EO76PO 29EO76 (F68), EO103PO39EO 103 and EO132PO50EO132 were investigated. Comparing F68 and EO13PO30EO13 (L64), previously studied by us, provided information on the effect of the copolymer hydrophilicity. The experimental data were analyzed by means of a …

Are polymers suitable rock analogs?

2002

To evaluate if a polymer is suitable for analog modeling, it is essential to know the rheological properties of the material. Polymers used in analog modeling exhibit a complex rheological behavior; only part of which has been taken into account in most modeling studies. The mechanical behavior is strongly dependent on strain rate and temperature, and is characterized by specific dependencies of the storage and loss moduli, related to the elasticity and viscosity, on the deformation rate (frequency). We have measured the storage and loss moduli at a broad range of strain rates and strains, using an oscillatory parallel-disk rheometer. Investigated materials are polydimethylsiloxane (PDMS), …

Polymer stain resistance: Prediction versus experiment

2013

Citric Acid Based Carbon Dots with Amine Type Stabilizers: pH-Specific Luminescence and Quantum Yield Characteristics

2020

We report the synthesis and spectroscopic characteristics of two different sets of carbon dots (CDs) formed by hydrothermal reaction between citric acid and polyethylenimine (PEI) or 2,3-diaminopyridine (DAP). Although the formation of amide-based species and the presence of citrazinic acid type derivates assumed to be responsible for a blue emission is confirmed for both CDs by elemental analysis, infrared spectroscopy, and mass spectrometry, a higher abundance of sp2-hybridized nitrogen is observed for DAP-based CDs, which causes a red-shift of the n-π* absorption band relative to the one of PEI-based CDs. These CD systems possess high photoluminescence quantum yields (QY) of ∼40% and ∼48…

Molecular dynamics of solid polymers as revealed by deuteron NMR

1983

Pulsed deuteron NMR spectroscopy is described, which has recently been developed to become a powerful tool for studying molecular dynamics in solid polymers. It is shown that by analyzing the line shapes of2H absorption spectra and spectra obtained via solid echo and spin alignment, respectively, both type and timescale of rotational motions can be determined over an extraordinary wide range of characteristic frequencies, approximately 10 MHz to 1 Hz. By applying these techniques to selectively deuterated polymers, motional mechanisms involving different segments of the monomer unit can be monitored. In addition, motional heterogeneities in glassy polymers can be detected. The information a…

Basic kinetic model for the reaction yielding linear polyurethanes. II

1995

On the basis of the gradual polyaddition kinetic model developed earlier, an attempt was made to provide a generalized mathematical model for the set of reactions yielding linear polyurethanes. The model is a system of first-order ordinary differential equations. It was assumed at the present stage of this model that the rate constants for the reaction considered do not change. The model developed was then solved numerically. Average molecular weight of the polymer and composition data for oligomers were calculated for a constant volume batch reactor and varied process parameters. The GPC method, which was tested for model urethane oligomers, was employed to verify the model developed. The …

Oligoethyleneoxide spacer groups in polymerizable surfactants

1991

Cationic and zwitterionic polymerizable surfactants bearing tri- and tetraethyleneglycol spacer groups between the polymerizable moiety and the surfactant structure were prepared and polymerized. Monomers and polymers were investigated with respect to their aggregation behavior in aqueous systems and compared to analogous monomers and polymers lacking spacer groups. In the case of the monomeric surfactants, the spacer groups depress both the Kraffttemperature and the critical micelle concentration. the area occupied per molecule at the air-water interface is substantially enlarged by the spacers, whereas the depression of surface tension is nearly constant. Although the monomers with and wi…

Crystallization of polymer melts under fast cooling. II. High-purity iPP

1992

SYNOPSIS Samples of a high-purity isotactic polypropylene (iPP) were quenched from the melt so as to monitor cooling history. A continuous variation of morphology and crystal structure was obtained with cooling rate. This is discussed in relation to sample thermal history evidencing that cooling history relevant to quenched samples is in the neighborhood of 90°C. In particular the samples are essentially mesomorphic when at this temperature cooling rates larger than 80°C/s were adopted, while below a few tens of °C/s only a­ monocline form is obtained. Densities of quenched samples were compared with predictions of an isokinetic extrapolation of Avrami model of polymer crystallization kinet…

Nonionic Maleic Surfmers

2002

ABSTRACT A set of nonionic maleic surfactants have been prepared, all coming from the derivatization of maleic hemiesters with a long alkyl chain. They are either amidoesters or diester products. In the case of amidoesters, the acid group was first activated and then reacted with primary or secondary or tertiary ethanolamine compounds. In the case of diesters, the hemiester was reacted directly with glycidol, in acid or basic conditions. These surfactants were characterized for their structure by 1H NMR, and for their surface active properties, by surface tension measurements. They were also used in batch emulsion polymerisation of styrene, and seeded core-shell copolymerisation of a 1/1 mi…