Processing, basic characterization and standard dielectric measurements on PLZTx/65/35 (4 ≤x≤ 11) ceramics
The influence of external stress (0–800 bar) on the dielectric properties of lead lanthanum zirconium titanate (PLZT) x/65/35 (4 ≤ x ≤ 11) ceramics was investigated. Applying uniaxial pressure leads to a change in the peak intensity of the electric permittivity (ϵ), in its frequency dispersion as well as in the dielectric hysteresis. The peak intensity of ϵ becomes broader and shifts to lower temperatures for PLZT x/65/35 with x = 4, 7, 9.75 and 11, with increasing pressure, on heating. It was concluded that applying uniaxial pressure induces an increase of Tm, and thus has a similar effect as the increase of the Ti ion concentration in the lead zirconium titanate (PZT) system. Results base…
Electrical transport in lead-free (Na0.5Bi0.5)1–xSrxTiO3 ceramics (x = 0, 0.01 and 0.02)
Lead-free (Na0.5Bi0.5)1xSrxTiO3 (x = 0, 0.01 and 0.02) ceramics were manufactured through a solid-state mixed oxide method and their ac (σac) and dc (σdc) electric conductivity were studied. It is ...
SrTiO3-doping effect on dielectric and ferroelectric behavior of Na0.5Bi0.5 TiO3 ceramics
Lead-free (Na0.5Bi0.5)1-xSrxTiO3 ceramics (x = 0–0.04) were synthesized by a conventional mixed-oxide technique. The microstructure study showed a dense structure, in good agreement with that of ab...
Influence of Electromechanical Fields on Dielectric Properties of PLZT−x/65/35 Ceramics (x = 6 and 7)
High density and transparent PLZT−x/65/35 (x = 6 and 7) ceramics with the average grain size of 5–7 μm was obtained by two−stage hot−pressing technology. The measurements of temperature/frequency dependence of the permittivities of these ceramics under uniaxial pressure (0–100 MPa) applied parallel to the ac electric field have been carried out. It was found that uniaxial pressure significantly influences dielectric properties of these ceramics. With the increase of pressure the maximum intensity in ϵ(T) curve decreases, becomes more diffuse and shifts towards higher temperature, dielectric dispersion decreases and classical ferroelectric seems to change to relaxor one. It was concluded, th…
Uniaxial Pressure Effect on Dielectric Properties of 0.7Na0. 5Bi0.5TiO3‐0.3SrTiO3Ceramics
The 0.7Na0.5Bi0.5TiO3-0.3SrTiO3 ceramics were prepared by a solid-state mixed-oxide technique at 1180°C. X-ray diffraction and Raman spectroscopy studies revealed that the obtained samples possess perovskite structure. The behaviour of the electric permittivity (ɛ) and polarization of these ceramics as a function of uniaxial pressure (0 – 1000 bar) were investigated. Applying pressure shifts and decrease of maximum value of ɛ, a diffuseness of the permittivity characteristics, decrease of the thermal hysteresis and change of the polarization. We discuss our results based on elastic changes in inter-ionic distances in the crystal structure and nanoregions switching processes by pressure. The…
Structural and Dielectric Properties of Na0.99Li0.01NbO3Ceramics
Na0.99Li 0,01 NbO3 ceramics were prepared by solid-state reaction method. The samples were characterized by X-ray diffraction, microstructure and dielectric permittivity measurements. The X-ray diffraction analysis showed that samples have a single phase of perovskite structure with orthorhombic symmetry. Microstructure investigations revealed crystalline structures in grains. It was found that dielectric properties of Na99Li0.01NbO3 ceramic are sensitive to the applied axial pressure. This includes the shift of phase transformation, diffuseness of the ϵ (T) profile and reduction of the thermal hysteresis. These effects can be caused by change in domain structure and anisotropy of crystalli…
LEAD-FREE (Na0.5Bi0.5)1-xBaxTiO3 SINGLE CRYSTALS (0 ≤ x ≤ 0.05) AND THEIR DIELECTRIC AND PYROELECTRIC PROPERTIES
ABSTRACT Lead-free single crystals of Na0.5Bi0.5TiO3-BaTiO3 (NBT-BT) system were prepared by Czochralski method and their dielectric and pyroelectric properties have been studied. The results were compared with these for pure NBT. The obtained samples show pure perovskite structure with rhombohedral symmetry at room temperature. Low frequency (100 Hz–100 kHz) investigations reveal the diffuse phase transitions. The obtained results are discussed in terms of local electric and strain fields caused by different ionic radius of (Na, Bi) and Ba ions. The NBT-BT system is expected to be a new promising candidate for lead-free electronic crystals.
Uniaxial Pressure Effect on Electric Properties of PSN and 0.95PSN-0.05PLuN Ceramics
The dielectric, pyroelectric and hysteresis loops measurements of PSN and 0.95PSN-0.05PLuN ceramics stress-free and under the stress (0–1.5 kbar) have been carried out. It was shown that axial pressure seems to change the partially ordered state to a disordered one, shifts the phase transformation and decreases the thermal hysteresis of the dielectric permittivity and the field-polarization hysteresis. These effects can be connected with change in domain structure, inter-ionic distances and defect density under the action of uniaxial pressure. The thermodynamic parameters of the phase transition were also determined.
Processing, basic characterization and standard dielectric measurements on PLZT x/65/35 (2≤x≤13) ceramics
ABSTRACTThe influence of external stress (0-800bar) on the dielectric properties of PLZT x/65/35 (2≤x≤13) ceramics was investigated. Applying uniaxial pressure leads to a change in the peak intensity of the electric permittivity (ϵ), of its frequency dispersion as well as in the dielectric hysteresis. The peak intensity of ϵ becomes broader and shifts to lower temperatures for PLZT x/65/35 with x = 2, 4, 6, 7, 9.75, 10, 11 and 13, with increasing pressure, on heating. It was concluded that applying uniaxial pressure induces an increase of Tm, and thus has similar effects as the increase of the Ti ion concentration in the PZT system. Results based on nanoregion switching processes under comb…
Electrical Transport Properties of Lead−Free (Na0.5Bi0.5)1-xBaxZr0.04Ti0.96O3Ceramics (x = 0.06, 0.085, 0.1)
Lead-free ceramics (Na0.5Bi0.5)1-xBaxZr0.04Ti0.96O3 were prepared by solid phase hot pressing sintering process. Density values of obtained samples are higher than 95% of the theoretical ones. Samples with x = 0.06, 0.085 and 0.1 were investigated in the present work. For these samples both ac and dc electric conductivity were studied. A low frequency (100 Hz-100 kHz) ac conductivity obeys the power law, characteristic for disordered materials. The dc conductivity has a thermally activated character. A barrier hopping model is found to explain the mechanism of charge transport in these materials. The (Na0.5Bi0.5)1-xBaxZr0.04Ti0.96O3 system is expected to be a new and promising candidate for…
DIELECTRIC PROPERTIES OF LEAD-FREE [(1-x)(Na0.5Bi0.5)-xBa]Zr1−yTiyO3CERAMICS (x = 0.01, 0.06, 0.085, 0.09, 0.1 AND y = 0.96, 0.97)
ABSTRACT Lead-free ceramics based on (Na0.5Bi0.5TiO3, NBT)-(Ba(Ti, Zr)O3, BTZ) were prepared by solid phase synthesis and hot pressing sintering process and their dielectric properties have been studied. The obtained results were compared with these for pure NBT. The obtained samples show pure perovskite structure. Low frequency (100 Hz-100 kHz) investigations reveal the diffuse phase transitions and relaxorlike behaviour. The obtained results are discussed in terms of inhomogeneity of ions distribution, their ferro- and antiferroactivity and internal stresses. The NBT-BTZ system is expected to be a new promising candidate for lead-free electronic ceramics.
Comparison of the Influences of a Perpendicular and Parallel Uniaxial Stress on the Dielectric and Ferroelectric Properties of Fe Doped BaTiO3Ceramics
The dielectric and ferroelectric properties of Fe-doped BaTiO3 ceramic under uniaxial stress applied perpendicular and parallel to the electric field are presented and analyzed. For the dielectric properties, the results showed that the uniaxial stress reduced an electric permittivity and dielectric losses for the both directions of applied stress. It was also found that an applied uniaxial pressure also enhanced a diffuse phase transformation behaviour. In the case of the ferroelectric properties the applied stress weakens a polarization when it is applied parallel (p∥ac) to the electric field. These results were interpreted through the stress induced domain switching process.
Electrical Transport in Lead-Free [(1−x)(Na0.5Bi0.5)-xBa]Zr1 - yTiyO3Ceramics (x = 0, 0.06, and y = 0, 0.96)
Lead-free ceramics based on (Na 0.5 Bi 0.5 TiO 3 , NBT)-(Ba(Ti,Zr)O 3 , BTZ) were prepared by solid phase hot pressing sintering process and their ac (σ ac ) and dc (σ dc ) conductivity have been studied (303–753 K). Low frequency (100 Hz–100 kHz) ac conductivity obeys power law σ ac ∼ ω s characteristic for disordered materials. The frequency exponent s is a decreasing function of temperature and tends to zero at high temperatures. Dc conductivity has thermally activated character and possesses four linear parts with four different activation energies and some discontinous changes. However, σ ac (T) possesses two linear parts with two different activation energies and more discontinuous ch…
SrTiO3and Pr Effects on Structural, Dielectric and Ferroelectric Properties of Na0.5Bi0.5TiO3Ceramic
[(Na0.5Bi0.5TiO3)0.7Sr0.3]1-xPrxTiO3(NBTS30P) (0 ≤ x ≤ 0.025) ceramics were prepared by solid-state synthesis process. Their crystal structure, microstructure dielectric and ferroelectric properties were studied. XRD data show that all of the ceramics possess a single perovskite phase. SEM results confirm that the ceramics are well sintered and exhibit relative densities higher than 97%. The results also reveal that the microstructure of the different compositions do not show a significant variation. The praseodymium (Pr) substitution to NBTS30 results in a change of crystal structure from cubic to tetragonal at x = 0.025. At the same time, electric permittivity decreases, the maximum is br…
Structural and Dielectric Properties of (Na0.5Bi0.5)0.70Ba0.30TiO3 Ceramics.
Abstract A (Na0.5Bi0.5)0.70Ba0.30TiO3 ceramic has been studied by X-ray diffraction and by measurements of dielectric and ferroelectric properties between room temperature and 450 °C. A sharp increase in the electric permittivity and dielectric loss near 200 °C has been observed. This sharp increase in dielectric responses indicates a transformation between normal and relaxor ferroelectric states. It is found that polar regions can exist at higher temperatures. The X-ray diffraction study shows that the transformation corresponds to the first order phase transition from tetragonal to cubic. The use of the (Na0.5Bi0.5)0.70Ba0.30TiO3 ceramic for device application has also been indicated.
Effect of Cu doping on Ba0.95Pb0.05TiO3 electrical properties studied by means of electrical impedance spectroscopy
The ceramics of 0.95BaTiO3–0.05PbTiO3+Xwt.%CuO (X = 0.05, 0.1, 1, 3) were prepared by a solid phase reaction. The structural and morphology studies were carried out by means of X-ray diffraction te...
Influence of Compressive Stress on Dielectric and Ferroelectric Properties of the Na0. 5K0.5NbO3, Na0.5K0.5(Nb0.94Sb0.06)O3and Na0.5K0.5(Nb0.94Sb0.06)O3+0.5mol%MnO2Ceramics
Good quality lead-free ceramics of Na0.5K0.5NbO3, Na0.5K0.5(Nb0.94Sb0.06)O3 and Na0.5K0.5(Nb0.94Sb0.06)O3 +0.5mol%MnO2 have been produced by a solid phase hot pressing sintering process at 1120–1145°C. The dependence of dielectric and ferroelectric properties on the uniaxial pressure (0–3000 bar) of the these samples was investigated, revealing a significant influence of the external stress on their properties. This includes a shift of the phase transition, a diffuseness of the permittivity characteristics, a change of the dielectric dispersion and a decrease of the polarization. We discuss our results based on hardening of the soft-mode and domain switching processes under applying of pres…
Raman spectra and anomalies of dielectric properties and thermal expansion of lead-free (1−x)Na0.5Bi0.5TiO3-xSrTiO3 (x = 0, 0.08 and 0.1) ceramics
ABSTRACTThermal expansion, Raman and dielectric properties of the lead-free (1−x)Na0.5Bi0.5TiO3-xSrTiO3 (x = 0, 0.08 and 0.1) ceramic solid solutions, fabricated by the conventional solid-state reaction method, were investigated. The Sr-doping results in an increase of the dielectric permittivity, broadening of the permittivity maximum, enhancement of the relaxation near depolarization temperature, broadening of the Raman bands and shift of all anomalies toward lower temperatures. The observed effects are attributed to an increase of the degree of cationic disorder and enhancement of the relaxor-like features. Anomalies in the thermal expansion strain were observed at the temperatures corre…
Structural, thermal, dielectric and ferroelectric properties of Na0.5K0.5NbO3and Na0.5K0.5NbO3+0.5mol%MnO2ceramics
Lead-free Na0.5K0.5NbO3 and Na0.5K0.5NbO3+0.5mol%MnO2 ceramics were fabricated by solid state hot pressing sintering process. The phase structure and thermal, dielectric and ferroelectric properties of these ceramics were investigated. X-ray measurements showed that all samples have a single perovskite structure and possess orthorhombic–tetragonal and tetragonal–cubic phase transitions. Sequence of phase transitions was confirmed by differential scanning calorimetry (DSC) and dielectric measurements. Obtained results showed that optimal temperature sintering of Na0.5K0.5 NbO3+0.5mol%MnO2 ceramics is 1100 °C. The results show that investigated ceramics are one of the promising materials as e…
Structural and electric characteristics of (Na0.5Bi0.5)0.50Ba0.50TiO3 and (Na0.5Bi0.5)0.20Ba0.80TiO3 ceramics
Abstract (Na0.5Bi0.5)0.50Ba0.50TiO3 and (Na0.5Bi0.5)0.20Ba0.80TiO3 ceramics have been prepared by the solid state reaction and studied by X-ray diffraction and by measurements of dielectric and ferroelectric properties between room temperature and 550 °C. A sharp increase in the electric permittivity and dielectric loss near 212 °C (for the first material) and near 205 °C (for the second material) on heating with remarkable thermal hysteresis have been observed. This sharp increase in dielectric responses indicates transformation between normal and relaxor ferroelectric states. The X-ray diffraction study shows that this transformation corresponds to the first order phase transition from te…
Dielectric and Ferroelectric Properties of Lead-Free NKN and NKN-Based Ceramics
Lead-free ceramics of Na0.5K0.5NbO3 (NKN), Na0.5K0.5(Nb0.94Sb0.06)O3 (NKNS6) and Na0.5K0.5(Nb0.94Sb0.06)O3 + 0.5%MnO2 (NKNS6 + 0.5%MnO2) have been prepared by a solid phase hot pressing sintering process. X-ray diffraction results show that the obtained samples possess the perovskite structure. The micrograph of the fractured surface showed a dense structure in a good agreement with that of 91–94% relative density determined by the Archimedes method. An average grain size decreases with Sb and Mn doping (from about 20 μm for NKN to about 5 and 2 μm for NKNS6 and NKNS6 + 0.5%MnO2, respectively). Low frequency (100 Hz–200 kHz) investigations revealed the diffuse phase transitions. It was foun…
Synthesis, microstructure and dielectric properties of (1−x)PSN−xPLuN
Ceramic lead niobates and their solid solutions PSN–PLuN (pure lutecium niobate) were synthesized by solid state reactions. The sequence of phases formed at PSN–PLuN synthesis has been studied by X-ray analysis. Their symmetry changed from rhombohedral for PSN to pseudo-monoclinic for the 0.75PSN–0.25PLuN compositions. The performed EDS investigations revealed that the samples PSN–PLuN are perfectly sintered. They contain a little glassy phase and their grains are well shaped. The increase of lutecium content in the examined solid solution caused downward shift of the temperature of the phase transition. The decrease of the achieved permittivity values ϵ was observed as well.
Influence of Compressive Stress on Dielectric and Ferroelectric Properties of the(Na0.5Bi0.5)0.7Sr0.3TiO3Ceramics
Good quality lead-free ceramics of (Na0.5Bi0.5)0.7Sr0.3TiO3(NBTS30) have been produced by a solid phase sintering process. The dependence of dielectric and ferroelectric properties on the unaxial pressure (0–1200 bar) were investigated. A shift and decrease of maximum value of e, decrease of the thermal hysteresis and coercive field and increase of polarization with increasing pressure were observed. The results were discussed in terms of an elastic changes in inter-ionic distances in a crystal structure and switching nanoregions under the action of pressure. The NBTS30 ceramic is expected to be a new promising candidate for lead-free electronic material.
Influence of Uniaxial Pressure on Dielectric Properties and Aging Effect of BiFeO3Ceramic
The external stress (0–1500 bar) dependence of dielectric properties and an aging effect of BiFeO3 ceramic has been investigated. The electric permittivity and dielectric losses first increased (up to about 700 bar) and next decreased with uniaxial pressure applied parallel to the ac field direction, while increased with the stress perpendicularly applied. It was suggested that combination of the de-aging, clamping of the domain walls, and the polarization reorientation mechanisms can be responsible for these changes. The aging effect is followed logarithmic law and is related to the relaxation of the domain structure towards an equilibrium configuration.
The structural and dielectric properties of the Na0.96Li0.04NbO3ceramics
Ceramic samples Na0.96Li0.04NbO3 were obtained using ceramic technology. The phase and structural analysis, the microstructure, EDS and EPMA, dielectric and hysteresis loops measurements have been performed. The dielectric and hysteresis loops measurements of Na0.96Li0.04NbO3 have been carried out. The dielectric measurements were performed both without and under axial pressure up to 120 MPa. It was shown that Na0.96Li0.04NbO3 ceramics have orthorhombic symmetry at room temperature and undergo a first order phase transition at a temperature of about 570 K. The axial pressure shifts the phase transition temperature and decreases the hysteresis in field-polarisation and field-strain dependenc…
Effect of Electromechanical Loading on the Dielectric Properties of PLZT−x/65/35 Ceramics (x = 8 and 8.5)
The influence of uniaxial pressure (0-800 bars) applied parallel to the ac electric field on the dielectric properties of La−modified lead–zirconate−titanate ceramics with the Zr/Ti ratio of 65/35 was investigated. Applying uniaxial pressure leads to the reduction of the peak intensity of the electric permittivity (ϵ), of the frequency dispersion as well as of the dielectric hysteresis. The peak intensity of ϵ becomes diffuse and shifts with increasing the pressure. Our results show that applying uniaxial pressure induces similar effects as increasing the Ti−ion concentration in PZT system. We interpreted our results based on domain switching processes under the action of combined electrome…
Influence of Sr addition on structural, dielectric and Raman properties of Na0.5Bi0.5TiO3ceramics
ABSTRACTLead free (Na0.5Bi0.5)1-xSrxTiO3 (x = 0, 0.01 and 0.02) ceramics were produced by a conventional solid-state sintering method. X-ray diffraction analysis shows that the obtained samples possess the perovskite structure with rhombohedral symmetry. The microstructure study shows a dense structure, in agreement with the relative density (above 97%). Dielectric analysis revealed the diffuse character of the electric permittivity anomalies and their shift to a lower temperature range after Sr doping of NBT. The Raman spectra are similar for all samples in agreement with the X-ray diffraction data. The possible origin of the observed effects was discussed.
Uniaxial stress dependence of the dielectric and ferroelectric properties of the Na0.5K0.5NbO3and Na0.5K0.5NbO3 + 0.5 mol%MnO2ceramics
Na0.5K0.5NbO3 and Na0.5K0.5NbO3 + 0.5 mol%MnO2 lead-free ceramics have been produced by solid phase hot pressing sintering process at 1120–1145°C. The results of the X-ray diffraction measurements showed that the obtained samples possessed a perovskite structure. The micrograph of the fractured surface showed a dense ceramic structure, in compliance with 93% relative density determined by the Archimedes method. The dependence of dielectric and ferroelectric properties on the uniaxial compressive stress (0–3000 bar) of the Na0.5K0.5NbO3 and Na0.5K0.5NbO3 + 0.5 mol%MnO2 ceramics was investigated. Significant influence of the external stress on these properties was revealed. It includes a shif…
Influence of Compressive Stress on Dielectric and Ferroelectric Properties of the 0.9PbSc0.5Nb0.5O3-0.1PbLu0.5Nb0.5O3Ceramics
0.9PbSc0.5Nb0.5O3-0.1PbLu0.5Nb0.5O3ceramics were prepared by a solid-state mixed-oxide technique. The phase formation and microstructure were studied using X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The influences of compressive stress (0 – 1500 bar) applied parallel to the electric field on the dielectric and ferroelectric properties of these ceramics were investigated. The results showed that the compressive stress had pronounced effects on these properties. With increasing pressure, the electric permittivity maximum decreases and shifts to higher temperature, thermal hysteresis, dielectric dispersion and polarization decrease. The obtained results were …
Influence of Axial Pressure on Electric Properties of PLuN and 0.6PLuN–0.4PSN Ceramics
The dielectric, pyroelectric and hysteresis loops measurements of PLuN and 0.6PLuN–0.4PSN ceramics, stress-free or under the stress (0–1.5 kbar), have been carried out. It is shown that uniaxial pressure shifts the phase transformation and decreases the thermal hysteresis of the electric permittivity and the field-polarization hysteresis. These changes of properties could be connected with domain wall motion and with switching of the polarization under uniaxial pressure.
PLZTx/65/35 ceramics (x = 2 and 4) under electromechanical and temperature loading
The effect of uniaxial pressure (0–1000 bars) applied parallel to the ac electric field on dielectric properties of La-modified lead–zirconate–titanate, Pb(Ti,Zr)O3 (PZT), ceramics with Zr/Ti ratio of 65/35 was investigated. The experimental results revealed that applying uniaxial pressure leads to a reduction of the peak intensity of the electric permittivity (e), of the frequency dispersion as well as of the dielectric hysteresis. Moreover, with increasing pressure, the peak intensity of e becomes diffuse and shifts to a higher temperature. It was concluded that applying uniaxial pressure induces similar effects as increasing the Ti–ion concentration in PZT system. The obtained results we…
Uniaxial Pressure Effects on the Dielectric Properties of the PLZT-x/65/35 (x = 9.75 and 10) Ceramics
The influence of uniaxial pressure (0-1000 bars) applied parallel to the ac electric field on the dielectric properties of PLZT-x/65/35 ceramics (x = 9.75 and 10) was investigated. The results show that the applied stress has a significant influence on the dielectric properties of PLZT ceramics. Applying uniaxial pressure leads to the reduction of the electric permittivity (ϵ) peak and the frequency dispersion. Moreover, the peak of ϵ becomes diffuse and shifts to a higher temperature with increasing pressure. The results show that applying uniaxial pressure induces similar effects as the increase in Ti−ion concentration in the PZT system. We interpreted our results based on the domain swit…
Influence of Unaxial Pressure on Electric Properties of (1-x)PSN-xPLuN Solid Solutions (0.75 ≤ x < 1)
(1-x)PSN-xPLuN ceramics with single phase perovskite structure and rhombohedral symmetry at room temperature were prepared by solid-state reaction method. The influence of unaxial pressure (0–1500 bars) on dielectric properties of these compounds were studied. It is found that these materials are sensitive to external stress. This includes the shift of phase transitions, diffuseness of dielectric permittivity characteristics and the decrease of the thermal hysteresis of the permittivity and field-polarization hysteresis. These changes of properties could be connected with the change in domain structure, the elastic change of distances between ions and the change in defects density.
Sb Effect on Structural, Dielectric, and Ferroelectric Properties of Na0.5K0.5NbO3Ceramics
Lead-free Na0.5K0.5(Nb1-xSbx)O3 (0<x<0.05) ceramics were fabricated by the solid-state reaction method and materials with more than 95% densification were obtained. A microstructure study confirms that the ceramics are well sintered. All compositions show complete perovskite solid solutions. Structural, dielectric and ferroelectric investigations for these specimens were performed. X-ray measurements showed that all compositions have a single perovskite structure with orthorhombic symmetry. Dielectric study revealed that the ceramics obtained are normal ferroelectrics. However some signs of diffuse phase transition were observed. The transition temperatures and the maximum electric permitti…
Influence of Uniaxial Pressure on Dielectric Properties of the PLZT-x/65/35 (x = 11 and 13) Ceramics
Uniaxial pressure (0–1000 bars) effects on the dielectric properties of the PLZT-x/65/35 ceramic samples (x = 11 and 13) samples was investigated. The obtained results reveal that the applied stress largely changes the dielectric properties of these ceramics. Applying uniaxial pressure leads to a reduction of the peak intensity of the electric permittivity and a change of the frequency dispersion. Besides with increasing the pressure the ϵ-peak shifts to a higher temperature. The results show that applying the uniaxial pressure induces similar effects as increasing the Ti−ion concentration in PZT system. These effects can be connected with the change in domain structure under the action of …
Dielectric, thermal and Raman spectroscopy studies of lead-free (Na0.5Bi0.5)1−xSrxTiO3 (x = 0, 0.04 and 0.06) ceramics
ABSTRACTLead-free (Na0.5Bi0.5)1−xSrxTiO3 (x = 0, 0.04 and 0.06) ceramics with relative densities above 97% were prepared by solid-state synthesis process. Their dielectric, thermal and Raman properties were studied. X-ray diffraction analysis shows perovskite structure with rhombohedral symmetry at room temperature. Sr doping of Na0.5Bi0.5TiO3 (NBT) results in an increase of the dielectric permittivity, diffusing of the permittivity maximum and its shift toward lower temperatures. The temperature of the rhombohedral–tetragonal phase transition indicated by the differential scanning calorimetry (DSC) peak and relaxational dielectric anomaly near the depolarization temperature are also shifte…
Influence of uniaxial pressure and aging on dielectric and ferroelectric properties of BaTiO3ceramics
The effect of uniaxial pressure (0–3000 bar) applied parallel to the AC electric field and aging on dielectric and ferroelectric behavior of BaTiO3 ceramics were investigated. Applying uniaxial pressure leads to a reduction of the peak intensity of the electric permittivity (e) of the polarization as well as of the dielectric hysteresis. The peak intensity of e becomes diffused and shifts to a higher temperatures with increasing the pressure. The electrostrictive coefficient Q 11 and differential permittivity were evaluated from the obtained data. We interpreted our results based on the hardening of the soft-mode and domain switching processes under the action of pressure. The aging effect …