0000000000159847
AUTHOR
Nino Spinella
Stress field model for strengthening of shear-flexure critical RC beams
A model for the design of shear-flexure critical reinforced concrete elements strengthened with fiber-reinforced polymer (FRP) sheets and plates is presented. The model is based on the stress field approach and the equilibrium method and accounts for the different failure modes of FRP, focusing on the debonding of the FRP from the concrete surface. The efficiency of the model in the strength assessment of beams reinforced with FRP by the prediction of the shear-flexure capacity is checked by corroborating the results of several experimental tests found in the literature. Moreover, the presented model's capacity to reproduce experimental behavior is compared with the formulations suggested b…
SHEAR STRENGTH DEGRADATION DUE TO FLEXURAL DUCTILITY DEMAND IN R.C. ELEMENTS
A proposal is formulated that allows to evaluate the residual shear strength of reinforced concrete columns and beams for an assigned flexural ductility demand by limiting the range of the deviation angle between the inclinations of the yield and the crack lines. In order to take into account the degradation due to cyclic loads, the reduction of the range of the deviation angle is related to the value of cinematic ductility
Design procedure for prestressed concrete beams
Abstract. The theoretical basis and the main results of a design procedure, which attempts to provide the optimal layout of ordinary reinforcement in prestressed concrete beams, subjected to bending moment and shear force are presented. The difficulties encountered in simulating the actual behaviour of prestressed concrete beam in presence of coupled forces bending moment - shear force are discussed; particular emphasis is put on plastic models and stress fields approaches. A unified model for reinforced and prestressed concrete beams under axial force - bending moment - shear force interaction is provided. This analytical model is validated against both experimental results collected in li…
Increasing the shear capacity of reinforced concrete beams using pretensioned stainless steel ribbons
In this work, the second part of an experimental campaign investigating the efficiency of an alternative retrofitting method for increasing the flexural and/or shear capacity in reinforced concrete beams, based on the use of prestressed stainless steel ribbons and steel angles, is presented and analytically reproduced. This group of tests focuses on the ability of the adopted retrofitting method to improve the shear strength and ultimate deformation of reinforced concrete structural elements. As described in a companion paper, the adopted retrofitting method is alternative to traditional techniques of reinforced concrete retrofitting, being easy to install and usually reversible, and charac…
Increasing the Capacity of Existing Bridges by Using Unbonded Prestressing Technology: A Case Study
External posttensioning or unbonded prestressing was found to be a powerful tool for retrofitting and for increasing the life extension of existing structures. Since the 1950s, this technique of reinforcement was applied with success to bridge structures in many countries, and was found to provide an efficient and economic solution for a wide range of bridge types and conditions. Unbonded prestressing is defined as a system in which the post-tensioning tendons or bars are located outside the concrete cross-section and the prestressing forces are transmitted to the girder through the end anchorages, deviators, or saddles. In response to the demand for a faster and more efficient transportati…
Experimental Tests and FEM Model for SFRC Beams under Flexural and Shear Loads
The complete load-vs-displacement curves obtained by four-point-bending tests on Steel Fiber Reinforced Concrete (SFRC) beams are predicted by using a nonlinear finite element code based on the Modified Compression Field Theory (MCFT) and the Disturbed Stress Field Model (DSFM) suitably adapted for SFRC elements. The effect of fibers on the shear-flexure response is taken into account, mainly incorporating tensile stress-strain analytical relationship for SFRC. The numerical results show the effectiveness of the model for prediction of the behavior of the tested specimens reinforced with light amount of stirrups or with fibers only. © 2008 American Institute of Physics.
Experimental results of RC columns strengthnened with Fiber Reinforced Cementitious Mortars
The structural behaviour of reinforced concrete columns strengthened with a system made up of fibre nets embedded in an inorganic stabilized cementitious matrix was investigated. Specimens with circular and square cross-section were cast and subjected to monotonic uniaxial compression to investigate the efficiency of a Polypara-phenylene-benzo-bisthiazole (PBO) Fibre Reinforced Cementitious Mortars (FRCM) system in increasing both carrying capacity and ductility. The experimental results show that confinement with PBO fibre produced a noticeable increment in strength and ductility, though the low mechanical ratios of fibre considered were not always able to ensure hardening behaviour up to …
Nonlinear Analysis of Beams Reinforced in Shear with Stirrups and Steel Fibers
The modified compression field theory (MCFT) and the disturbed stress field model (DSFM) are often used to predict the nonlinear behavior of reinforced concrete structures. This study presents several extensions of the MCFT and DSFM to the case of high-strength steel fiber-reinforced concrete beams subjected to transverse loads. Experimental four-point bending tests were conducted on 12 concrete beams with a different percentage of fibers and/or stirrups. To validate the updates introduced in the analytical models, numerical analysis was performed using nonlinear finite element software. Modeling of the post-peak softening branch of the tensile and compressive constitutive curves of fibrous…
Simple Plastic Model for Shear Critical SFRC Beams
A simple physical model, for prediction of ultimate shear strength of steel fiber reinforced concrete (SFRC) beams is developed on the basis of a plastic approach originally proposed for reinforced concrete (RC) beams without stirrups. It is founded on the hypothesis that cracks can be transformed into yield lines, and thus is know as Crack Sliding Model (CSM). First, the CSM is improved in order to take into account the shear strength increase for deep beams, due to the arch effect. Then, the effectiveness factors for fibrous concrete under biaxial stresses are evaluated, taking into account the post-cracking tensile strength of SFRC and its ability to control slippage along shear cracks. …
Ductility of Reinforced Concrete Members Externally Wrapped with Fiber-Reinforced Polymer Sheets
The effectiveness of external wrapping with fiber-reinforced polymer for enhancing the curvature ductility of lightly reinforced concrete members is investigated. Referring to members with circular transverse cross sections, the performances in terms of both strength and ductility capacities are analyzed, and the predictive reliability of two different recent constitutive models, available in the literature and able to take into account the softening behavior of confined concrete, is checked. A parameter characterizing the effectiveness of the confining wrapping is proposed, and characteristic values are suggested. Moreover, referring to ductility increases due to confinement effects, a com…
Increasing the flexural capacity of RC beams using steel angles and pre-tensioned stainless steel ribbons
This article presents an experimental programme on reinforced concrete beams retrofitted with steel angles and pre-stressed stainless steel ribbons to increase their flexural strength and ductility. Two different configurations of the steel ribbon were designed, and two companion specimens for each type considered were subjected to a four-point bending test to facilitate a direct comparison in the analysis of the effectiveness of the retrofitting technique. The influence of longitudinal steel angles and transverse stainless steel ribbons is analysed, and the concrete confinement due to stainless steel ribbons examined. The strengthened beams show remarkable increments in flexural strength a…
Concrete columns confined with fibre reinforced cementitious mortars: Experimentation and modelling
Abstract The structural behaviour of concrete columns strengthened with a system made up of fibre nets embedded in an inorganic stabilized cementitious matrix under an uniaxial load was investigated. Medium size specimens with circular and square cross-section were cast and subjected to monotonic uniaxial compression, to investigate the efficiency of a p-Phenylene BenzobisOxazole (PBO) Fibre Reinforced Cementitious Mortar (FRCM) system in increasing both strength and ductility. The experimental results show that the confinement system adopted produced a noticeable increment in strength and ductility, though the low mechanical ratios of fibre considered were not always able to ensure hardeni…
ELEMENTI IN CALCESTRUZZO CONFINATI CON FRCM ANALISI SPERIMENTALE PER CARICHI MONOTONICI
Vengono presentati i risultati di prove sperimentali su provini di calcestruzzo rinforzati con fibre di materiale composito, soggetti a compressione monotonica fino alla rottura. In particolare si è sperimentato l’impiego degli FRCM (Fiber Reinforced Cementitiuos Matrix), in cui le fibre di rinforzo sono immerse in una matrice cementizia. I risultati ottenuti dimostrano che il confinamento eseguito con questi materiali conferisce agli elementi di calcestruzzo un significativo aumento di capacità portante e di duttilità, sebbene le percentuali di fibra impiegate non abbiano consentito di ottenere comportamenti costantemente incrudenti fino a rottura. In particolare le curve tensione-deformaz…
Failure by corrosion in PC bridges: A case history of a viaduct in Italy
Purpose The paper illustrates a viaduct collapse due to corrosion phenomena. Moreover, a contribution to the issues related to both the control of existing structures and design methods to be followed for the construction of new buildings is provided. Design/methodology/approach The objectives were achieved by in situ observations and numerical analyses. The effects of corrosion phenomena are investigated, and the progressive collapse analysis is provided to be helpful in this case. Findings The damages induced by corrosion phenomena have caused the collapse of the viaduct taken in to account. The performed numerical analyses were able to reproduce the effects of corrosion in terms of redu…
Generalization of Shear Truss Model to the Case of SFRC Beams with Stirrups
A theoretical model for shear strength evaluation of fibrous concrete beams reinforced with stirrups is proposed. The formulation is founded on the theory of plasticity and the stress field concepts, generalizing a known plastic model for calculating the bearing capacity of reinforced concrete beams, to the case of fibrous concrete. The beneficial effect of steel fibres is estimated taking into account the residual tensile strength of fibrous concrete, by modifying an analytical constitutive law which presents a plastic plateau as a post-peak branch. Around fifty results of experimental tests carried out on steel fibrous concrete beams available in the literature were collected, and a compa…
Stress-Strain Law for Confined Concrete with Hardening or Softening Behavior
This paper provides a new general stress-strain law for concrete confined by steel, fiber reinforced polymer (FRP), or fiber reinforced cementitious matrix (FRCM), obtained by a suitable modification of the well-known Sargin’s curve for steel confined concrete. The proposed law is able to reproduce stress-strain curve of any shape, having both hardening or softening behavior, by using a single closed-form simple algebraic expression with constant coefficients. The coefficients are defined on the basis of the stress and the tangent modulus of the confined concrete in three characteristic points of the curve, thus being related to physical meaningful parameters. It will be shown that if the v…
Experimental in situ behaviour of unreinforced masonry elements retrofitted by pre-tensioned stainless steel ribbons
Abstract The results of in situ tests carried out on unreinforced and reinforced poor rubble masonry full-scale walls in the earthquake prone Messina (Italy) area are presented and discussed. This experimental research was aimed at the assessment of the in plane shear behaviour of ancient masonry strengthened with an innovative system for masonry and retrofitting of reinforced concrete element constituted by three-dimensional pre-tensioned stainless steel ribbons. A comparison between different strengthening configurations was made in order to characterise the behaviour of masonry panels under shear-compression load, focusing attention on the diagonal cracking failure mode. The effectivenes…
Prove sperimentali su travi in c.a. rinforzate con metodo CAM®: valutazione dei meccanismi di flessione (parte 2)
Nel presente contributo sono descritti e valutati criticamente i risultati discendenti da un lavoro finalizzato allo studio del comportamento di travi in calcestruzzo armato (c.a.) rinforzate mediante il sistema CAM. Il lavoro è inserito nell’ambito del progetto di ricerca “In.CAM.M.I.N.O”, acronimo di “INnovazione del CAM Mediante Impiego di Nuove Opzioni di processo”, che ha visto coinvolte l’Università degli Studi di Messina, CHIMETEC S.a.s. e ABI S.r.l. di Ragusa. In particolare sono stati studiati il comportamento, l’evoluzione del danneggiamento ed i possibili meccanismi di rot- tura di quindici travi in c.a. in scala reale rinforzate mediante un sistema di nastri in acciaio di spesso…
Non linear and linearized combination coefficients for modal pushover analysis
Current design practice and seismic codes tend to assess seismic demand of buildings by Non linear Static Analysis (NSA), based on the evaluation of the pushover curve. Earlier non-linear static analysis procedure estimate the response peak value by evaluating the push-over curve adopting a distribution of invariant forces proportional to the fundamental vibration mode. In order to include the effect of higher modes several multimodal push-over analysis procedures were proposed in literature. In In the most famous of these, namely Modal Pushover Analysis (MPA), nodal response peak values are obtained by combination of "modal" responses by the traditional SRSS or CQC methods: the use of the …
Shear resistance analytical evaluation for RC beams with transverse reinforcement with two different inclinations
An analysis-oriented mechanical model for shear strength evaluation of Reinforced Concrete (RC) beams with transverse reinforcement with two different inclinations, which required a numerical analysis, is turned into a design-oriented analytical model that can easily be utilized for practical purposes. The model assessed the shear resistance, according to the “lower-bound solution”, employing a numerical procedure that maximizes the element shear strength varying the stresses in the two sets of transverse reinforcement and the magnitude and inclination of the web concrete compressive stress field. The model is formulated with the aim of representing an extension of Eurocode 2 framework to R…
Shear capacity in concrete beams reinforced by stirrups with two different inclinations
Abstract A model for the estimation of shear capacity in Reinforced Concrete (RC) beams with web reinforcement is provided by introducing a generalization of classical plastic Nielsen’s model, which is based on the variable-inclination stress-field approach. The proposed model is able to predict the shear capacity in RC beams reinforced by means of stirrups having two different inclinations and longitudinal web bars. A numerical comparison with the results of experimental tests and those provided by a Finite Element Model (FEM) based on the well known theory of Modified Compression Field Theory (MCFT) is carried out for validating the robustness of the proposed model. Finally, a set of para…
Ultimate Shear of RC Beams with Corroded Stirrups and Strengthened with FRP
Transverse reinforcement plays a key role in the response behavior of reinforced concrete beams. Therefore, corrosion of steel stirrups may change the failure mode of elements from bending to shear, leading to a brittle and catastrophic crisis. It is important to strengthen reinforced concrete beams with corroded stirrups to enhance the shear resistance. This paper presents a formulation, based on the modified compression field theory, to estimate the ultimate shear of reinforced concrete beams strengthened with FRP, because of stirrup corrosion. The detrimental effect of corrosion on steel stirrup yield strength was taken into account by introducing an empirical decay law. The effective st…
Push-Over Analysis of RC Frame with Corroded Rebar
Abstract As known, the Italian building heritage largely consists of reinforced concrete frames designed before the ‘80s, which are, in many cases, built in the absence of specific anti-seismic criteria. Moreover, many of them, today, are characterized by bad structural conditions. Moreover, the problem of the structural conditions of the existing buildings, and their residual strength capacity, is often linked to the deterioration induced by the corrosive phenomena, which end up having a big impact on steel rebar mechanical properties. In this work, in order to investigate the influence of corrosion-damage on seismic response of existing reinforced concrete structures, a study has been car…
Shear strength degradation due to flexural ductility demand in circular RC columns
An analytical model was developed to estimate the shear-strength degradation and the residual capacity of circular reinforced concrete (RC) columns subjected to seismic action. The proposed model is an upgrade of a previously proposed model for axial force $$N$$ , bending moment $$M$$ and shear force $$V$$ ( $$N$$ – $$M$$ – $$V$$ ) interaction domain evaluation for rectangular and circular cross-section RC elements subjected to static loading. The model was extended to the case of circular cross-sections subjected to seismic actions with limitation of the range of variability of the deviation angle between the directions of the stress fields and the crack inclinations, as a function of the …
Cyclic behavior of composite truss beam-to-RC column joints in MRFS
In the present paper, the cyclic behavior of beam-to-column joints made up of Hybrid Steel Trussed Concrete Beams (HSTCBs) connected to Reinforced Concrete (RC) piers is investigated. HSTCBs are a typology of composite beam generally constituted by a steel truss with end zone added rebars embedded within a block of concrete cast in place. HSTCBs represent a structural solution for light industrialization in the civil constructions; the main advantages in their use are the higher construction speed with the minimum site labor, the possibility of covering wide spans with low depths and a final economical convenience. For these reasons, they are also increasingly adopted within seismic framed …