Search results for " COMPOSITES"
showing 10 items of 1620 documents
Comparison of the friction and wear properties of titanium and oxidised titanium in dry sliding against sintered high speed steel HS18-0-1 and agains…
2005
Abstract The paper presents the results of conformal pin-on-disc tribological tests concerning the hard oxidised zone, α-Ti(O), created at the surface of a titanium specimens sliding against the sintered and hardened up to 850 HV30, Grade T1 high speed steel (HS18-0-1) counterspecimens. Comparison with the results obtained for the tests performed against hardened up to 620 HV30 C45 carbon steel counterspecimens has been done. Testing was carried out at room temperature and at unlubricated conditions. After tests the structures and compositions of the worn surfaces and wear debris were a subject of LOM, SEM observations and X-ray microanalyses. In comparison with the baseline—the Ti/T1 HSS c…
The role of coatings in controlling the cutting process when turning with coated indexable inserts
1998
Abstract This paper is concerned with the variations in the specific cutting pressure and the tool–chip interface temperature that occur when machining a medium carbon steel and an austenitic stainless steel with TiC-, TiC/TiN- and TiC/Al2O3/TiN- coated inserts. Extensive experimental studies involving the cutting force and the interface temperature were performed. A standard thermocouple embedded in the workpiece was used to determine the cutting temperature. Two new parameters were introduced in order to compare both the mechanical and thermal loadings of the tool–chip contact for coated flat-faced and grooved inserts. Some optimal coating structures for high speed machining of these stee…
Friction and wear properties of titanium and oxidised titanium in dry sliding against hardened C45 steel
2004
Abstract The aim of the paper is to present the results of conformal pin-on-disc tribological tests concerning the hard oxidised zone created in superficial layer of a titanium specimen sliding against the hardened to a hardness of 690 HV carbon C45 steel counterspecimen. Tribological testing was carried out at room temperature and at unlubricated conditions. After tests the structures and chemical compositions of the wear debris and worn surfaces were a subject of SEM and X-ray investigations. In comparison with the baseline the technical quality titanium/C45 steel couple, the wear and lifetime performance of the oxidised titanium/steel C45couple was markedly superior. Dominant wear debris…
Functionalized silver doped hydroxyapatite scaffolds for controlled simultaneous silver ion and drug delivery
2017
Abstract Bacterial infections are a major problem in bone tissue regeneration, thus it is essential to incorporate antibacterial properties within the bone scaffolds. Silver compounds are frequently used as antibacterial agents to prevent bacterial infections and numerous studies have shown that silver ions can be incorporated within the biocompatible and osteoconductive biomaterial hydroxyapatite (HAp) structure, but, so far, no study has thoroughly evaluated silver ion release rates in long term. Therefore, we have established a novel carrier system for local drug delivery based on functionalized silver doped hydroxyapatite with determined long term silver ion release rates. Silver ions f…
CROSSLINKED HYALURONAN WITH A PROTEIN-LIKE POLYMER: NOVEL BIORESORBABLE FILMS FOR BIOMEDICAL APPLICATIONS
2007
In this work, novel hydrogel films based on hyaluronan (HA) chemically crosslinked with the alpha,beta-poly(N-2-hydroxyethyl) (2-aminoethylcarbamate)-D,L-aspartamide (PHEA-EDA) were produced by solution casting method. The goal was to exploit both the biological key role of HA in tissue repair and regeneration, and the versatility of a synthetic protein-like polymer as the PHEA-EDA, in order to obtain biomaterials with physicochemical and biological properties suitable for a clinical use. By varying the molar ratio between the PHEA-EDA amino groups and HA carboxyl groups, three different films were obtained and characterized. Particularly FTIR, swelling, hydrolysis, and enzymatic degradatio…
Fibrin-chitosan composite substrate for in vitro culture of chondrocytes
2013
The aim of this study was to develop a biocompatible monolayer substrate based on fibrin and chitosan for in vitro culture of chondrocytes. Fibrin-chitosan composite substrates combined the proved cell adhesion properties of fibrin with the hydrophilicity and poor adhesion capacity of chitosan. Chitosan microspheres were produced by coacervation method, agglomerated within a fibrin network and subsequently crosslinked with genipin. The composite substrate was stable for 28 days of culture due to the high crosslinking density. Human chondrocytes cultured on the composite substrate were viable during the culture period. At the end of culture time (28 days) the composite substrate showed low c…
Optical grating recording in ChG thin film by electron beam
2013
Abstract Recording capabilities of As Se S chalcogenide (ChG) glasses using electron beam (EB) lithography have been investigated in this study. After exposure with EB the thin films of these inorganic glasses can be etched in alkaline amine solvent with high selectivity. High resolution, smooth shaped structures have been fabricated using ChG thin films. Height of developed pattern can be controlled through changing applied electron dose.
The preparation and thermal evolution of polymeric gels with garnet stoichiometry in the CaOAl2O3SiO2 and CaOCr2O3SiO2 systems
1990
Abstract The synthesis of gels with garnet stoichiometry in the CaOAl 2 O 3 SiO 2 and CaOCr 2 O 3 SiO 2 systems and their evolution in thermal processing have been studied. Dried gels with the stoichiometry 3CaO.Al 2 O 3 .3SiO 2 show a homogeneous aspect without detectable crystalline phase. The thermal evolution of these gels indicates no formation of grossularite at temperatures up to 1000°C after 12 h. In the uvarovite garnet samples, 3CaO.Cr 2 O 3 .3SiO 2 , a small amount of crystalline phase was detected in the dried gels. The homogeneity of the gels was checked by scanning electron microscropy. The infrared study of these polymeric gels confirmed the presence of SiOMe (MeCr 3+ …
Influence of stoichiometry on high temperature intrinsic defects in fused silica
1992
Abstract The set of intrinsic defects, their generation, interactions and recombination reactions are discussed, including the participation of atomic and molecular oxygen, which allows one to take into account the stoichiometry of fused silica. The mathematical solution of the set of equations, which characterizes the equilibrium concentrations of intrinsic defects, gives the specific values of intrinsic defect concentrations at different temperatures and stoichiometries. The influence of such intrinsic defects frozen in at room temperature on the spectroscopic characteristics of fused silica is analyzed.
Drug release from alpha,beta-poly(N-2-hydroxyethyl)-DL-aspartamide-based microparticles.
2004
Abstract Spherical pH-sensitive microparticles have been prepared by reverse phase suspension polymerization technique. Starting polymer has been α , β -poly( N -2-hydroxyethyl)- dl -aspartamide (PHEA) partially derivatized with glycidylmethacrylate (GMA). PHEA-GMA copolymer (PHG) has been crosslinked in the presence of acrylic acid (AA) or methacrylic acid (MA) at various concentration. The obtained microparticles have been characterized by FT-IR spectrophotometry, particle size distribution analysis and scanning electron microscopy. In order to have information about water affinity of the prepared samples, swelling measurements have been carried out in aqueous media which simulate some bi…