Search results for " Silicate"
showing 10 items of 126 documents
Photosensitivity of SiO2–Al and SiO2–Na glasses under ArF (193 nm) laser
2009
Abstract Photosensitivity of SiO 2 –Al and SiO 2 –Na glass samples was probed by means of the induced optical absorption and luminescence as well as by electron spin-resonance (ESR) after irradiation with excimer-laser photons (ArF, 193 nm). Permanent visible darkening in the case of SiO 2 –Al and transient, life time about one hour, visible darkening in the case of SiO 2 –Na was found under irradiation at 290 K. No darkening was observed at 80 K for either kind of material. This investigation is dedicated to revealing the electronic processes responsible for photosensitivity at 290 and 80 K. The photosensitivity of both materials is related to impurity defects excited directly in the case …
Composition and physicochemical properties of calcium silicate based sealers: A review article
2017
Background Recently a new generation of endodontic sealers has been developed based on calcium silicate as MTA Fillapex, Endoseal MTA, Total Fill BC Sealer, EndoSequence BC Sealer, iRoot SP, Endo CPM sealer, MTA-Angelus and ProRoot Endo Sealer. A review of literature was conducted to discuss the composition, physicochemical properties, and clinical perspectives of calcium silicate based sealers. Material and methods A literature search was conducted in PubMed and web of knowledge databases with appropriate MeSh terms and keywords. A total of 71 studies were reviewed for data extraction. Results and conclusions Calcium silicate based sealers showed suitable physical properties to be used as …
Adsorption of a dye on clay and sand. Use of cyclodextrins as solubility-enhancement agents.
2007
Abstract Laboratory-scale studies were aimed at elucidating the physico-chemical aspects on the removal process of crystal violet (CV) from waters and solid substrates. The laponite clay (RD) and sand were chosen for the double aim at investigating them as CV adsorbents for water treatment and as substrates which mime the soil components. Sand is very effective in removing CV from waters. The cyclodextrins (CDs) were exploited as solubility-enhancement agents to remove CV from the solid substrates. They are powerful solvent media because they extract the CV from sand forming water-soluble CV/CD inclusion complexes and do not show affinity for sand. Optimum performance was shown by the modif…
The use of lightweight expanded clay aggregate (LECA) as sorbent for PAHs removal from water.
2012
Author's version of an article in the journal: Journal of Hazardous Materials. Also available from the publisher at: http://dx.doi.org/10.1016/j.jhazmat.2012.03.038 Lightweight expanded clay aggregate (LECA) has been explored as a sorbent for the removal of PAHs (phenanthrene, fluoranthene and pyrene) from water. The efficacy of LECA as a sorbent for PAHs was assessed using contact time, mass of sorbent and sorption isotherms in a series of batch experiments. Maximum (optimum) sorption was reached at 21 h after which the amount of PAHs sorbed remained almost constant. Batch experiments were conducted by shaking a 100 ml solution mixture of individual PAHs (containing 0.02 mg/L) with LECA. T…
Petrography and decay of a marly limestone in the cloister of a medieval cathedral in Sicily
2004
This paper deals with a significant process of decohesion of a marly limestone, taking place in the cloister of the medieval Cathedral of Cefalu, a pleasant town on the northern coast of Sicily. After desalination with deionised water and consolidation with ethyl silicate, the decay of the stone became faster. The aim of our study is to characterise the stony material and investigate the observed decay phenomena. The stone, that is a poor building material indeed, is characterised by means of petrographical, chemical and physical analyses on samples taken from the monument. Furthermore, experimental tests are performed in the laboratory in order to highlight the causes of incompatibility be…
Influence of temperature on the hydration products of low pH cements
2012
International audience; The chemical evolution of two hydrated "low pH" binders prepared from binary (60% Portland cement + 40% silica fume) or ternary (37.5% Portland cement +32.5% silica fume + 30% fly-ash) mixtures was characterized over one year at 20 degrees C. 50 degrees C, and 80 degrees C. The main hydrates were Al-substituted C-S-H. Raising the temperature from 20 to 80 degrees C caused a lengthening and cross-linking of their silicate chains. Ettringite that formed in pastes stored at 20 degrees C was destabilized. Only traces of calcium sulfate (gypsum and/or anhydrite) reprecipitated after one year in some materials cured at 50 degrees C and 80 degrees C. The sulfates released w…
Le comportement du soufre et les conditions d'oxydoréduction dans les basaltes hydratés de l'Etna inférés par des inclusions vitreuses et des verres …
2017
Sulfur is an important volatile component of magmas that presents different oxidation states, depending on the redox conditions and on the phase of occurrence: in silicate melts it is typically dissolved as S⁶⁺ and/or S²⁻ , in the gas phase it occurs principally as SO₂ (S⁴⁺ ) and H₂S (S²⁻). Mount Etna, in which magmatic redox conditions are poorly constrained, is used as a case study to investigate sulfur behavior in hydrous basaltic magmas during magma differentiation and degassing. This research integrates the study of natural olivine-hosted melt inclusions with an experimental study on S solubility in hydrous alkali basalts at magmatic conditions.Experimental results suggest the importan…
New approach for synthesis of poly(ethylglyoxylate) using Maghnite-H + , an Algerian proton exchanged montmorillonite clay, as an eco-catalyst
2017
International audience; In this works, we have explored a new method for a green synthesis of poly(ethylglyoxylate) (PEtG). This method consists on using a montmorillonite clay called Maghnite-H+ as an eco-catalyst to replace triethylamine which is toxic. Cationic polymerization experiments are performed in bulk conditions at three temperatures (-40 degrees C, 25 degrees C, 80 degrees C) and in THF solutions at room temperature (25 degrees C). At 25 degrees C, an optimum ratio of 5 wt% of catalyst leads to molar masses up to 22000 g/mol in THF solutions. Polymerizations in bulk conditions lead to slightly lower masses than experiments conducted in THF solutions. However, bulk polymerization…
Direct chemical grafted curcumin on halloysite nanotubes as dual-responsive prodrug for pharmacological applications
2016
Covalently functionalized halloysite nanotubes (HNTs) were successfully employed as dual-responsive nanocarriers for curcumin (Cur). Particularly, we synthesized HNT-Cur prodrug with a controlled curcumin release on dependence of both intracellular glutathione (GSH) and pH conditions. In order to obtain HNT-Cur produgs, halloysite was firstly functionalized with cysteamine through disulphide linkage. Afterwards, curcumin molecules were chemically conjugated to the amino end groups of halloysite via Schiff's base formation. The successful functionalization of halloysite was proved by thermogravimetric analysis, FT-IR spectroscopy, dynamic light scattering and scanning electron microscopy. Ex…
Orientation of charged clay nanotubes in evaporating droplet meniscus.
2015
© 2014 Elsevier Inc. During drying, an aqueous suspension of strongly charged halloysite clay nanotubes concentrates at the edge of the droplet ("coffee-ring" effect) which provides alignment of the tubes along the liquid-substrate contact line. First, the surface charge of the nanotubes was enhanced by polyanion adsorption inside of the lumen to compensate for the internal positive charges. This increased the magnitude of the ξ-potential of the tubes from -36 to -81mV and stabilized the colloids. Then, colloidal halloysite was dropped onto the substrate, dried at 65°C and after a concentration of ~0.05mgmL-1 was reached, the alignment of nanotubes occurred starting from the droplet edges. …