Search results for " VAP"
showing 10 items of 575 documents
Lipid hydrophobicity, physical state and distribution effects on the properties of emulsion-based edible films
2000
Abstract Addition of lipids to polysaccharide-based films is necessary to improve water vapor barrier properties but it leads to a decrease of mechanical properties. Model emulsified edible films mainly composed of methylcellulose (film-forming substance) and lipid mixtures (moisture barrier) were prepared. The effect of the physicochemical characteristics of the lipid phase (hydrophobicity and physical state) and of its distribution within the methylcellulose-matrix on the mechanical and water vapor barrier film properties was investigated. The nature of the lipid phase had little influence on mechanical properties of emulsified films, but had a substantial effect on the water vapor barrie…
Lipid hydrophobicity and physical state effects on the properties of bilayer edible films
2000
Abstract Edible bilayer films based on methylcellulose, used as the film-forming substance, and lipid mixtures, as barriers against moisture transfers, were prepared. The thickness of the lipid layer had little influence on film mechanical properties, regardless of the nature and the solid content of the fat layer. Mechanical resistance was mainly attributed to the methylcellulose matrix. The water vapor transfer rate (WVTR) decreased substantially when film thickness increased up to 100 μm. Upwards, transfer seemed to be independent of thickness. The WVTR was 1.5 up to 2.5 higher for triglyceride lipid layers than alkane lipid layers. Also, WVTR increased by a factor of 25–75 when the liqu…
Improving the local vertex invariants in alkane graphs through a standard molecular orbital approach
2007
Abstract In this work, novel topological indices are introduced by the application of algorithms based on molecular orbital theory. Actually, the novel indices are obtained by computing new values of the local vertex invariants (LOVIs) in alkane graphs. The most significant result is the dramatic increase in the predictive capability achieved with the topological charge indices weighted according the new LOVIs’ values in the prediction of four key properties in the set of octane isomers, namely heat of atomization, molar refraction, heat of vaporization and boiling point.
Templated growth of smart coatings: Hybrid chemical vapour deposition of vanadyl acetylacetonate with tetraoctyl ammonium bromide
2009
Hybrid aerosol assisted and atmospheric pressure chemical vapour deposition methodology has been utilised to produce thin films of vanadium dioxide from vanadyl acetylacetonate. Tetraoctyl ammonium bromide (TOAB) was used in the aerosol precursor solution. The films were analysed by X-ray diffraction, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy. Their optical and thermochromic behaviour was also determined. It was found that the use of TOAB had a templating effect that led to a halving in the particle size and that this consequently led to a significant decrease in the thermochromic transition temperature of the films to 34 8C.
Templated growth of smart nanocomposite thin films: Hybrid aerosol assisted and atmospheric pressure chemical vapour deposition of vanadyl acetylacet…
2009
Hybrid aerosol assisted and atmospheric pressure chemical vapour deposition methodology has been utilised to produce nanocomposite thin films of gold nanoparticles and vanadium dioxide from vanadyl acetylacetonate and auric acid. The addition of tetraoctyl ammonium bromide (TOAB) to the precursor Solution gave control of the size and distribution of gold nanoparticles in the vanadium oxide matrix. These reactions led to vanadium dioxide films with reduced crystallite sizes and enhanced thermochromic properties. The films were analysed by X-ray diffraction, scanning electron microscopy and X-ray photoelectron spectroscopy. Their optical and thermochromic behaviour was also determined, This h…
Amorphous TiO2 in LP-OMCVD TiNxOy thin films revealed by XPS
2001
Abstract TiN(O)–TiO 2 thin films were prepared on Si(1 0 0) by the low pressure organo metallic chemical vapor deposition (LP-OMCVD) method, using ammonia and titanium isopropoxide as precursors. In order to complete previous characterizations, an Ar + bombardment/XPS coupled study was carried out. This method is based on the fact that the behavior of a compound towards an ion bombardment is a function of its composition. In particular, Ar + bombardment of TiO 2 (whatever its form) leads to a preferential sputtering of oxygen atoms with subsequent reduction of titanium and formation of Ti 3+ and Ti 2+ easily detectable by XPS from a significant broadening of the Ti 2p lines. In the opposite…
Structure and properties of GaNxOy films grown by nitridation of GaAs (100) substrates
2004
GaAs (100) substrates have been heat-treated in a metal-organic chemical vapor deposition reactor under flows of NH 3 and an oxygen organo-metallic precursor at temperatures between 650°C and 750°C. Yellowish films formed at the surface of all the samples. Gallium, nitrogen and oxygen were detected by EDX analysis of the films. The oxygen content was estimated in the range of at 5-10 at% depending on the heat-treatment temperature. X-ray diffraction and HRTEM results indicate that the structure of the films corresponds to the hexagonal wurtzite phase of GaN with an expanded unit cell. Raman spectra show hands corresponding to the Raman active GaN modes as well as disorder-activated broad ba…
Reactive direct current magnetron sputtered TiO2 thin films with amorphous to crystalline structures.
2008
International audience; TiO2 thin films were deposited on soda–lime glass substrates by reactive direct current magnetron sputtering in a mixture of pure argon and oxygen. The influence of both the deposition time, td, and the post-annealing treatments on the films morphology, composition and structure was analyzed by scanning electron microscopy, ellipsometry, X-ray photoelectrons spectroscopy, X-ray diffraction (XRD) and Raman spectroscopy. Amorphous TiO2 was obtained for the shortest deposition time, td=15 min. Increasing td up to 30 min, poorly crystallized anatase and rutile phases were formed together with amorphous TiO2, as was revealed by complementary XRD patterns and Raman spectra…
Nanostructured Pt–TiO2 composite thin films obtained by direct liquid injection metal organic chemical vapor deposition: Control of chemical state by…
2015
Abstract Nanostructured Pt–TiO 2 composite thin films were synthesized by direct liquid injection metal organic chemical vapor deposition process, using trimethyl(methylcyclopentadienyl)platinum and titanium isopropoxide as precursors. Surface and cross-sectional morphologies obtained by scanning electron microscopy and transmission electron microscopy evidenced the uniform distribution of platinum nanoparticles in the TiO 2 matrix. At higher Pt content, the X-ray diffraction analysis showed that the face-centered cubic phase of platinum appeared together with an anatase TiO 2 structure. In addition, as far as the platinum chemical state is concerned, the co-deposition of TiO 2 and Pt allow…
Thermal effects on the growth by metal organic chemical vapour deposition of TiO2 thin films on (100) GaAs substrates
2002
Abstract TiO 2 thin films were deposited on (100) GaAs substrates by LP-MOCVD with deposition temperatures ( T d ) ranking from 450 to 750 °C. The structure of these layers was studied by X-ray diffraction (XRD) and Raman spectroscopy. The growth of the TiO 2 anatase phase was observed for T d T d >600 °C. Finally, X-ray photoelectron spectrometry (XPS) and secondary ion mass spectroscopy (SIMS) experiments showed the presence of small quantities of Ga and As through the whole film thickness, slightly increasing at the surface of the layers. This result was related to the SEM observations and explained by considering the growth conditions.