Search results for " electrodes"
showing 10 items of 72 documents
Sensor Properties of Pristine and Functionalized Carbon Nanohorns
2016
Nanodispersions of pristine single-wall carbon nanohorns (i.e., p-SWCNHs) and oxidized-SWCNHs (i.e.; o-SWCNHs) were used to modify screen printed electrode (SPE). p-SWCNHs and o-SWCNHs were fully characterized by using several analytical techniques, as: HR-TEM (High Resolution-Transmission Electron Microscopy), FE-SEM/EDX (Field Emission-Scanning Electron Microscopy/Energy Dispersive X-ray Analysis), Raman spectroscopy, thermogravimetric analysis, differential thermal analysis (DTA), and the Brunauer-Emmett-Teller (BET) method. The chemically modified SPEs were also characterized with Cyclic Voltammetry (CV), using several different electro-active targets. In all cases, p-SWCNHs showed bett…
Electrochemistry of TiO2–iron hexacyanocobaltate composite electrodes
2014
Abstract In this paper we investigate the electrochemical behavior of iron hexacyanocobaltate (FeHCC) in comparison to the cobalt hexacyanoferrate (CoHCF). The best results were achieved on electrochemical synthesized film of FeHCC on the TiO2 modified electrodes. The chemical and physical characterizations confirm the formation of the FeHCC with the classical cubic crystal structure of the Prussian blue analogs, with cell parameter a very close to 10 A, as well as the formation of micro aggregates of TiO2 covered by FeHCC. The synthesis was performed on various substrates such as glassy carbon (GC), graphite foil (GF) and indium tin oxide (ITO) in order to develop new technological applica…
An electrochemical DNA biosensor for the detection of CTX-M extended-spectrum β-lactamase-producing Escherichia coli in soil samples
2013
International audience; An electrochemical hybridization assay involving neutravidin-coated carbon screen-printed electrodes and an HRP-based detection have been shown to provide an effective tool for the genotypic analysis of extended-spectrum beta-lactamase-producing E. coli strains in complex samples such as soil. (c) 2012 Elsevier B.V. All rights reserved.
Determination of NH(3) in pyrolysis gases by ammonia selective electrode.
1993
The suitability of ion-selective electrode for the determination of ammonia in pyrolysis gases of fossil fuels was studied. The ammonia was absorbed into acidic solution and two kinds of determination methods were carried out. The ammonia was either measured directly from the acid solution, or ammonia was first released into the gas phase and then determined (air gap method) by the ammonia selective electrode. The electrode functioned well in both cases, but the linear calibration range was rather narrow, slightly more than one tenfold. The quantitative detection limit in the water phase was 5 × 10−6M (0.085 ppm) NH3 and in gas phase operation solutions above 5 × 10−4M (8.5 ppm) NH3 it was …
Intracranial measurement of current densities induced by transcranial magnetic stimulation in the human brain
2003
Transcranial magnetic stimulation (TMS) is a non-invasive technique that uses the principle of electromagnetic induction to generate currents in the brain via pulsed magnetic fields. The magnitude of such induced currents is unknown. In this study we measured the TMS induced current densities in a patient with implanted depth electrodes for epilepsy monitoring. A maximum current density of 12 microA/cm2 was recorded at a depth of 1 cm from scalp surface with the optimum stimulation orientation used in the experiment and an intensity of 7% of the maximal stimulator output. During TMS we recorded relative current variations under different stimulating coil orientations and at different points…
Dorsal root ganglia neurite outgrowth measured as a function of changes in microelectrode array resistance
2017
Current research in prosthetic device design aims to mimic natural movements using a feedback system that connects to the patient's own nerves to control the device. The first step in using neurons to control motion is to make and maintain contact between neurons and the feedback sensors. Therefore, the goal of this project was to determine if changes in electrode resistance could be detected when a neuron extended a neurite to contact a sensor. Dorsal root ganglia (DRG) were harvested from chick embryos and cultured on a collagen-coated carbon nanotube microelectrode array for two days. The DRG were seeded along one side of the array so the processes extended across the array, contacting a…
VALIDITY, RELIABILITY AND FEASIBILITY OF MEASURING MUSCLE ACTIVITY WITH TEXTILE ELECTRODES EMBEDDED INTO CLOTHING
2007
INTRODUCTION In out-of-laboratory settings the surface EMG measurements are complicated by the requirement of careful electrode placement and skin preparation. The development of washable textile electrodes that can be sowed into sportswear enable muscle activity recordings during normal locomotion without skin preparation and the problem of wires hanging around the body [1]. In this study we performed validity, reliability and feasibility tests of the textile electrodes embedded into shorts against the traditional bipolar surface electrodes.
Simple Circuit Models for Studying Global Earthing Systems
2007
The paper proposes three simple circuit models for the simulation of the behaviour of a global earthing system during different fault events. The models allow one the evaluation of the maximum earth potential rise at every possible fault location and for every possible fault event. The three considered fault events are: single-line-to-earth fault inside a MV/LV substation, double-earth-fault in a MV line, single-line-to-earth fault inside a HV/MV station. After having illustrated the hypotheses at the basis of the study, the circuit models for the three fault events are presented and a numerical example shows how to use them in order to check the "global safety" of the interconnected earthi…
The Quest for Global Safety
2007
The authors present a systematic study on the factors that have influence on the establishment of the safety conditions ensuring the rise of Global Earthing Systems. Starting from the definition of Global Earthing System given by CENELEC Document HD 637 SI and from the results of the studies done on the last years on the interconnected earthing systems inside MV networks, the paper proposes some directions of deepening on the topic of Global Safety. Some of the themes whom the paper deals with are: the correct definition of proximity, interconnection and quasi-equipotentiality of the earth electrodes belonging to a Global Earthing System; the influence of the presence of HV/MV stations on h…
Ground-Fault Current Transfer at the Transition Station of a Combined Overhead-Cable Line. A Parametric Analysis
2007
When a substation is fed by a combined overhead-cable transmission line, a significant part of the ground fault current flows through the grounded cable sheaths and discharges into the earth at the transition station, where cables are connected to the overhead line. If the transition station is a dead-end steel pole structure, the local ground electrode, small and of high resistance, could be inadequate to maintain the ground potential rise within safety limits in case of a fault to ground at the receiving end substation. Based on a circuit model approach, the paper presents a parametric analysis of the fault current distribution between the faulted substation and the transition station, ta…