Search results for "Anodization"
showing 10 items of 29 documents
ZnO/ZnS heterostructures for hydrogen production by photoelectrochemical water splitting
2016
This work studies the photoelectrochemical behavior of novel ZnO/ZnS heterostructures obtained by means of anodization in water and glycerol/water/NH4F electrolytes with different Na2S additions under controlled hydrodynamic conditions. For this purpose different techniques such as Field Emission Scanning Electronic Microscopy (FE-SEM) with EDX, Raman spectroscopy and photoelectrochemical water splitting tests under standard AM 1.5 conditions have been carried out. The obtained results showed that the hydrodynamic conditions promoted an ordered nanotubular morphology which facilitates electron-hole separation and consequently, the photoelectrochemical activity for water splitting is enhance…
Novel tree-like WO3 nanoplatelets with very high surface area synthesized by anodization under controlled hydrodynamic conditions
2016
In the present work, a new WO3 nanostructure has been obtained by anodization in a H2SO4/NaF electrolyte under controlled hydrodynamic conditions using a Rotating Disk Electrode (RDE) configuration. Anodized samples were analyzed by means of Field Emission Scanning Electronic Microscopy (FESEM), Confocal Raman Microscopy and photoelectrochemical measurements. The new nanostructure, which consists of nanoplatelets clusters growing in a tree-like manner, presents a very high surface area exposed to the electrolyte, leading to an outstanding enhancement of its photoelectrochemical activity. Obtained results show that the size of nanostructures and the percentage of electrode surface covered by…
Influence of electrolyte temperature on the synthesis of iron oxide nanostructures by electrochemical anodization for water splitting
2018
[EN] Iron oxide nanostructures are an attractive option for being used as photocatalyst in photoelectrochemical applications such as water splitting for hydrogen production. Nanostructures can be obtained by different techniques, and electrochemical anodization is one of the simplest methods which allows high control of the obtained morphology by controlling its different operational parameters. In the present study, the influence of the electrolyte temperature during electrochemical anodization under stagnant and hydrodynamic conditions was evaluated. Temperature considerably affected the morphology of the obtained nanostructures and their photoelectrochemical behavior. Several techniques …
Qualitative Models for the Photoresponse and Capacitance of Annealed Titania Nanotubes
2015
Physicochemical characterization of annealed TiO2 nanotubes (TNTs) was conducted by using photocurrent spectroscopy and differential capacitance techniques. It has been shown that the geometry and architecture of nanotubes determine how photogenerated electrons and holes are separated and transferred. Photocurrent generation in TNTs is a consequence of two phenomena; drifting of holes into the electrolyte and diffusion of electrons toward the substrate. These two processes have been shown to be independent of the anodic polarization. The capacitance of TiO2 nanotubes is also affected by their geometry. In anodic potentials, with respect to the flat band potential of the underlying barrier l…
Observation of New Oscillatory Phenomena during the Electrochemical Anodization of Silicon
1999
This paper reports the observation of large undamped voltage oscillations during the anodic polarization of silicon in electrol yte containing a combination of acids. One of them stimulates oxide growth and the other its chemical dissolution (in the present c ase, (0.01-0.1 M H3PO4) + (0.001- 0.01 M HF). This temporal patterning of the anodization process is shown to be due to the formation of a thin (50-90 nm) oxide layer at the sample surface and its subsequent lifting-off. The mechanism of oxide detachment i s thought to be an isotropic growth of micropores at the oxide/silicon interface triggered on by changes of electrochemical condi tions there.
Customized WO3 nanoplatelets as visible-light photoelectrocatalyst for the degradation of a recalcitrant model organic compound (methyl orange)
2018
[EN] WO3 nanoplatelets have been synthesized by electrochemical anodization in acidic electrolytes containing two different complexing agents: fluorides and hydrogen peroxide. The influence of the morphology and size of these nanoplatelets on their photoelectrocatalytic performance has been studied following the degradation of a model organic recalcitrant compound, such as methyl orange (MO). The effect of several supporting electrolytes on this photodegradation process has also been checked. The best MO decoloration was observed for nanoplatelets fabricated in the presence of low H2O2 concentrations, whose distribution and small size made them expose a very high surface area to the problem…
Elimination of pesticide atrazine by photoelectrocatalysis using a photoanode based on WO3 nanosheets
2018
[EN] The photoelectrocatalytic (PEC) degradation of a persistent and toxic herbicide, atrazine, has been investigated by using a novel and high-performance WO3 nanostructure in the form of nanosheets/nanorods as photoanode. The nanostructure has been synthesized by anodization in acidic media in the presence of a very small amount (0.05 M) of H2O2, and its morphology, as well as its electrochemical and photoelectrochemical properties have been characterized. Atrazine was completely degraded after similar to 180 min of reaction following pseudo-first order kinetics, and 2-hydroxyatrazine was identified as the main intermediate species. Moreover, the s-triazine ring in cyanuric acid (the fina…
Influence of annealing conditions on the photoelectrocatalytic performance of WO3 nanostructures
2020
[EN] Nanostructured WO3 photoanodes have been synthesized by electrochemical anodization under controlled hydrodynamic conditions in acidic media in the presence of 0.05 M H2O2. Subsequently, samples have been subjected to a thermal treatment (annealing) at different temperatures (400 degrees C, 500 degrees C and 600 degrees C) and under different gaseous atmospheres (air, N-2, Ar). The influence of these annealing conditions on the morphology, crystallinity, photoelectrochemical behavior and dopant chemistry of the different photoanodes has been investigated through Electronic Microscopy, Raman Spectroscopy, Photoelectrochemical Impedance Spectroscopy and Mott-Schottky analysis. In general…
Synthesis of WO3 nanorods through anodization in the presence of citric acid: Formation mechanism, properties and photoelectrocatalytic performance
2021
[EN] In this study, WO3 nanomds have been fabricated by simple anodization in the presence of different amounts of citric acid and at different anodization times. A comprehensive morphological, structural, electrochemical and photoelectrochemical characterization of different samples has been carried out. Moreover, a formation mechanism for WO3 nanorods has been proposed. Finally, these nanostructures have been proven to be excellent visible-light photoelectrocatalysts to remove persistent organic pollutants present in wastewaters, such as fenamiphos. Almost the 80% of this molecule was eliminated from the test solution after 180 min of irradiation, indicating the great potential of these W…
Formation of ZnO nanowires by anodization under hydrodynamic conditions for photoelectrochemical water splitting
2020
[EN] The present work studies the influence of hydrodynamic conditions (from 0 to 5000 rpm) during Zn anodization process on the morphology, structure and photoelectrocatalytic behavior of ZnO nanostructures. For this purpose, analysis with Confocal Laser-Raman Spectroscopy, Field Emission Scanning Electron Microscope (FE-SEM) and photoelectrochemical water splitting tests were performed. This investigation reveals that hydrodynamic conditions during anodization promoted the formation of ordered ZnO nanowires along the surface that greatly enhance its stability and increases the photocurrent density response for water splitting in a 159% at the 5000 rpm electrode rotation speed.