Search results for "Atomic layer"
showing 10 items of 140 documents
Enhancement of Electronic and Optical Properties of ZnO/Al2O3 Nanolaminate Coated Electrospun Nanofibers
2016
International audience; Nanolaminates are new class of promising nanomaterials with outstanding properties. Here we explored on the tuning of structural properties and the enhancement of electronic and optical properties of 1D PAN ZnO/Al2O3 nanolaminates designed by atomic layer deposition (ALD) and electrospinning. The influence of ZnO/Al2O3 bilayer thicknesses on the fundamental properties of 1D PAN ZnO/Al2O3 nanolaminates has been investigated. Due to the quantum confinement effect, the shift of XPS peaks to higher energies has been observed. Work function of Al2O3 was mostly independent of the bilayers number, whereas the ZnO work function decreased with an increase of the bilayer numbe…
Optical properties of ZnO deposited by atomic layer deposition (ALD) on Si nanowires
2018
International audience; In this work, we report proof-of-concept results on the synthesis of Si core/ ZnO shell nanowires (SiNWs/ZnO) by combining nanosphere lithography (NSL), metal assisted chemical etching (MACE) and atomic layer deposition (ALD). The structural properties of the SiNWs/ZnO nanostructures prepared were investigated by X-ray diffraction, Raman spectroscopy, scanning and transmission electron microscopies. The X-ray diffraction analysis revealed that all samples have a hexagonal wurtzite structure. The grain sizes are found to be in the range of 7-14 nm. The optical properties of the samples were investigated using reflectance and photoluminescence spectroscopy. The study o…
Tuning of ZnO 1D nanostructures by atomic layer deposition and electrospinning for optical gas sensor applications
2015
We explored for the first time the ability of a three-dimensional polyacrylonitrile/ZnO material—prepared by a combination of electrospinning and atomic layer deposition (ALD) as a new material with a large surface area—to enhance the performance of optical sensors for volatile organic compound (VOC) detection. The photoluminescence (PL) peak intensity of these one-dimensional nanostructures has been enhanced by a factor of 2000 compared to a flat Si substrate. In addition, a phase transition of the ZnO ALD coating from amorphous to crystalline has been observed due to the properties of a polyacrylonitrile nanofiber template: surface strain, roughness, and an increased number of nucleation …
Tuning of Structural and Optical Properties of Graphene/ZnO Nanolaminates
2016
International audience; Zinc Oxide (ZnO) and graphene (G) have been extensively studied because of their unique physical properties. Here, Graphene-Zinc Oxide (G/ZnO) nanolaminates were fabricated, respectively, by chemical vapor deposition and low temperature atomic layer deposition technique. The number of obtained G/ZnO layers was tuned from 1 to 11 with a total thickness of 100 nm for all prepared nanolaminates. The structure, optical properties and interaction between G and ZnO were studied by X-ray methods, TEM, AFM, Raman and optical spectroscopy. The obtained results were interpreted and analysed taking into account strain and charge effects of graphene in G/ZnO nanostructures. We d…
Optical and structural properties of Al 2 O 3 doped ZnO nanotubes prepared by ALD and their photocatalytic application
2018
Abstract Al2O3 doped ZnO nanotubes with controlled ratio of Al2O3 were successfully designed by combining the two techniques of atomic layer deposition (ALD) and electrospinnig. In order to study the effect of Al2O3 doping on optical and structural properties of Al2O3 doped ZnO nanotubes, the prepared samples were analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), Fourier-transform infrared (FTIR), reflectance emission and room temperature photoluminescence (PL). The photocatalytic activity and stability of these materials under UV light was studied by the photodegradation of methyl orange (MO). The results indicate that Al2O…
Synthesis of novel ZnO/ZnAl2O4 multi co-centric nanotubes and their long-term stability in photocatalytic application
2016
Based on the Kirkendall effect, novel double, triple and quadruple co-centric nanotubes of ZnO/ZnAl2O4 have been successfully fabricated by combining the two techniques of electrospinning and atomic layer deposition. The as-prepared samples were annealed at 900 °C under air. Their morphological, structural and optical properties were studied by Scanning Electron Microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Energy-Dispersive X-ray spectroscopy (EDX), UV-visible spectrophotometry, Raman spectroscopy, photoluminescence (PL) and reflectance emission. The performances and long-term stability of these multi co-centric nanotubes for photocatalytic applications…
Optical properties of ultrathin Al2O3/ZnO nanolaminates
2015
Abstract Because of their high resistance against ultraviolet and high energy particles, ultrathin amorphous nanolaminates can be very attractive for aerospace application. Here we report on the optical and structural properties of ultrathin Al2O3/ZnO nanolaminates deposited by Atomic Layer Deposition. Structural properties of nanolaminates were studied by GIXRD and AFM. Optical characterization was performed by transmittance, spectroscopic ellipsometry and photoluminescence (PL) spectroscopy. Regression analysis of ellipsometric spectra has shown that absorption peak decreases and blue shifted with the decrease of bilayer thickness in the stack. On the basis of the analysis of structural a…
The influence of localized plasmons on the optical properties of Au/ZnO nanostructures
2015
Optical and structural experiments have been carried out on Si/ZnO thin films modified with ultra-thin gold layers of different thicknesses. ZnO was produced via Atomic Layer Deposition (ALD) and Au via Physical Vapor Deposition (sputtering). The structural properties of nanostructures were studied by XRD and AFM. Optical characterization was performed by absorbance, photoluminescence (PL) and spectroscopic ellipsometry (SE). A transition from cluster-to-thin films with the increase of Au thickness has been revealed from an analysis of optical and structural parameters. The analysis of optical features of the system has shown that slight changes of the localized plasmon absorption peaks in …
Visible Photoluminescence of Variable-Length Zinc Oxide Nanorods Embedded in Porous Anodic Alumina Template for Biosensor Applications
2021
Zinc oxide (ZnO) and porous anodic aluminum oxide (PAAO) are technologically important materials, rich with features that are of interest in optical applications, for example, in light-emitting and sensing devices. Here, we present synthesis method of aligned ZnO nanorods (NR) with 40 nm diameter and variable length in 150 to 500 nm range obtained by atomic layer deposition (ALD) of ZnO in pores of continuously variable thickness PAAO. The relative intensity of yellow (1.99 eV), green (2.35 eV), and blue (2.82 eV) photoluminescence (PL) components originating from the different types of defects, varied with non-monotonic dependency on the composite film thickness with a Fabry–Pérot like mod…
Recent results with lifetime enhanced microchannel-plate photomultipliers
2018
Abstract The favored photon sensors for the DIRC (detection of internally reflected Cherenkov light) detectors at the PANDA (Anti-proton Annihilation at Darmstadt) experiment at FAIR (Facility for anti-proton and ion research) are micro-channel-plate photomultipliers (MCP-PMTs). The main problem until a few years ago was the limited lifetime of the MCP-PMTs caused by a rapid decrease in quantum efficiency (QE) of the photo cathode (PC) with increasing integrated anode charge (IAC). These limitations are overcome by applying an atomic layer deposition (ALD) coating on the MCPs, as recently done by PHOTONIS and Hamamatsu. During the last years’ tests of lifetime enhanced MCP-PMTs were perform…