Search results for "Chemical analysis"

showing 10 items of 324 documents

Assessing the MALDI-TOF MS sample preparation procedure to analyze the influence of thermo-oxidative ageing and thermo-mechanical degradation on poly…

2011

[EN] Multiple processing by means of successive injection cycles was used to simulate the thermo-mechanical degradation effects on the oligomeric distribution of PLA under mechanical recycling. Likewise, an accelerated thermal ageing over PLA glass transition was performed in order to simulate its service life. MALDI-TOF MS was used for the analysis and the sample preparation procedure was assessed by means of a statistical Design of Experiments (DoE). The quality effects in use for the analysis were signal-to-noise ratio and Resolution. Different matrixes, analyte/matrix proportions and the use of NaTFA as cationization agent were considered. A deep inspection of the statistical results pr…

Solucions polimèriquesPolymers and PlasticsGeneral Physics and AstronomyTransesterificationsThermo-mechanical degradationSample preparation procedureMatrix (chemical analysis)DegradationMechanismsMaterials ChemistryCationizationMechanical recyclingSample preparationRepeating unitPoly(lactide)Signal to noise ratioChemistryMultiple processingDesign of Experiments (DoE)AnalytesInjection cyclesPolylactidesMAQUINAS Y MOTORES TERMICOSMatrix-assisted laser desorption/ionization-time-of-flight mass spectrometryGlass transitionDesign of experimentsGlass lasersThermo mechanicalMALDI TOF MSChromatographyMatrixMass spectrometrySignal to noiseTermoplàsticsOrganic ChemistryDegradation mechanismThermo-oxidative ageingStatistical design of experimentsMatrix-assisted laser desorption/ionizationInvestigation methodsMatrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry (MALDI-TOF MS)Polylactide (PLA)AgeingOligomersDegradation (geology)DesorptionDeep inspectionExperimentsPoly(lactide)European Polymer Journal
researchProduct

Beeswax cleaning by solvent extraction of pesticides

2018

We set out to test if the methodology used to clean sheep wool wax (Lanolin) from pesticides could be used to clean beeswax as well. We first made an aggregate sample of brood comb wax from three different US beekeepers. Sub-samples of these aggregate wax samples were analyzed for pesticide contamination. The remaining wax, was then dissolved into hexane solution and run through four N, N-Dimethylformamide (DMF) washes. During these extractions, the pesticides partitioned into the DMF, and so were removed from the beeswax. Following the solvent extractions, the beeswax was tested again for pesticides. An average of 95% of the pesticide contamination was removed by the chemical wash procedur…

Solvent extractionClinical Biochemistry010501 environmental sciences01 natural sciencesBeeswaxMatrix (chemical analysis)03 medical and health sciencesmedicineBeeswaxlcsh:Science030304 developmental biology0105 earth and related environmental sciences0303 health sciencesWaxPesticides removalChromatographyChemistryLanolinExtraction (chemistry)Brood combPesticideSolventChemistryMedical Laboratory Technologyvisual_artvisual_art.visual_art_mediumlcsh:QHexaneN N-Dimethylformamide (DMF)medicine.drugMethodsX 6: 980-985 (2019)
researchProduct

Current trends in solid-phase-based extraction techniques for the determination of pesticides in food and environment

2006

Solid-phase extraction (SPE) procedures for pesticide residues in food and environment are reviewed and discussed. The use of these procedures, which include several approaches such as: matrix solid-phase dispersion (MSPD), solid-phase micro-extraction (SPME) and stir-bar sorptive extraction (SBSE), represents an opportunity to reduce analysis time, solvent consumption, and overall cost. SPE techniques differ from solvent extraction depending on the interactions between a sorbent and the pesticide. This interaction may be specific for a particular pesticide, as in the interaction with an immunosorbent, or non-specific, as in the way a number of different pesticides are adsorbed on apolar or…

SorbentChromatographyPesticide residueChemistryMicrochemistrySolid Phase ExtractionExtraction (chemistry)BiophysicsFood ContaminationPesticideBiochemistrySolventMatrix (chemical analysis)Phase (matter)Environmental PollutantsSolid phase extractionPesticidesFood AnalysisEnvironmental MonitoringForecastingJournal of Biochemical and Biophysical Methods
researchProduct

Reduced graphene oxide-based magnetic composite for trace determination of polycyclic aromatic hydrocarbons in cosmetics by stir bar sorptive dispers…

2020

This work describes a sensitive and rapid analytical method for trace determination of polycyclic aromatic hydrocarbons (PAHs) in cosmetic samples. The proposed method is based on stir bar sorptive-dispersive microextraction (SBSDME). A magnetic composite made of CoFe2O4 magnetic nanoparticles embedded into reduced graphene oxide sheets is used as sorbent phase. After the extraction, the target analytes are desorbed in toluene and then analyzed by gas chromatography-mass spectrometry (GC-MS). The main parameters involved in the extraction procedure (i.e., composite amount, extraction time and desorption time) were evaluated and optimized to provide the best extraction efficiency. The method…

SorbentCosmetics010402 general chemistryMass spectrometryFerric Compounds01 natural sciencesBiochemistryGas Chromatography-Mass SpectrometryAnalytical ChemistryMatrix (chemical analysis)Magneticschemistry.chemical_compoundLimit of DetectionPolycyclic Aromatic HydrocarbonsSolid Phase MicroextractionDetection limitChromatography010401 analytical chemistryOrganic ChemistryExtraction (chemistry)CobaltGeneral MedicineToluene0104 chemical sciencesLinear rangechemistryStandard additionGraphiteJournal of Chromatography A
researchProduct

Sample preparation strategies for the determination of psychoactive substances in biological fluids

2020

This review focuses on the existing analytical procedures for the determination of new psychoactive substances (NPS) in biological fluids by chromatographic methods. Direct analysis of samples is scarcely employed and most proposed methodologies include a sample pre-treatment in order to remove matrix interferents and, in some cases, pre-concentrate extracts. Current extraction methods for NPS determination in plasma/serum, urine, and oral fluids have been widely discussed, such as liquid-liquid, solid-phase, and micro extraction approaches, highlighting the advantages and drawbacks of the proposed extraction methodologies. Regarding microextraction approaches, techniques like microextracti…

SorbentLiquid Phase MicroextractionLiquid-Liquid ExtractionClinical Chemistry Tests010402 general chemistry01 natural sciencesBiochemistrySpecimen HandlingAnalytical ChemistryMatrix (chemical analysis)Liquid chromatography–mass spectrometryBiological fluidsHumansSample preparationSolid phase extractionSalivaSolid Phase MicroextractionChromatographyPsychotropic DrugsChromatographyChemistrySolid Phase Extraction010401 analytical chemistryOrganic ChemistryExtraction (chemistry)General MedicineBody Fluids0104 chemical sciencesAnalytical proceduresJournal of Chromatography A
researchProduct

A hybrid nano-MOF/polymer material for trace analysis of fluoroquinolones in complex matrices at microscale by on-line solid-phase extraction capilla…

2021

Abstract A hybrid material (nano-metal organic framework@organic polymer, named as nano-MOF@polymer) was applied for the first time as sorbent for on-line solid-phase extraction capillary electrophoresis with ultraviolet detection (SPE-CE-UV). The resulting material was prepared building layer-by-layer a HKUST-1 (Hong Kong University of Science and Technology-1) nano-MOF onto the polymer surface, which allowed controlling the thickness and maximizing the active surface area. The sorbent was widely characterized at micro- and nano-scale to validate the synthesis and to establish the material properties. Then, fritless microcartridges (2 mm) were assembled by packing only a few micrograms of …

SorbentPolymers02 engineering and technology01 natural sciencesAnalytical ChemistryMatrix (chemical analysis)Capillary electrophoresisCapillary electrophoresisElectroforesi capil·larHumansSolid phase extractionDetection limitChromatographyElutionChemistrySolid Phase Extraction010401 analytical chemistryExtraction (chemistry)Electrophoresis CapillaryReproducibility of ResultsNanostructured materials021001 nanoscience & nanotechnology0104 chemical sciencesMaterials nanoestructurats0210 nano-technologyHybrid materialFluoroquinolones
researchProduct

Determination of dithiocarbamates and metabolites in plants by liquid chromatography–mass spectrometry

2004

Abstract A quantitative matrix solid-phase dispersion and liquid chromatography–atmospheric pressure chemical ionization mass spectrometry (LC–APCI–MS) method is outlined for the simultaneous analysis of dithiocarbamates (DTCs) and their degradation products in plants. Compounds analyzed are dazomet, disulfiram, thiram and the metabolites ethylenthiourea and propylenthiourea. The performance of two different sample preparation protocols, the proposed one and other based on solid-phase extraction, as well as, of both atmospheric pressure ionization sources, APCI and electrospray, were compared. The effect of several parameters on the extraction, separation and detection was studied. Dithioca…

Spectrometry Mass Electrospray IonizationChemical ionizationChromatographyChemistryOrganic ChemistryReproducibility of ResultsAtmospheric-pressure chemical ionizationGeneral MedicinePlantsReference StandardsMass spectrometryBiochemistryHigh-performance liquid chromatographyAnalytical ChemistryMatrix (chemical analysis)ThiocarbamatesLiquid chromatography–mass spectrometryFruitVegetablesIndicators and ReagentsSample preparationSolid phase extractionChromatography LiquidJournal of Chromatography A
researchProduct

Routine application using single quadrupole liquid chromatography-mass spectrometry to pesticides analysis in citrus fruits.

2005

Abstract A rapid and sensitive liquid chromatography–electrospray ionization–mass spectrometry method has been developed for the routine analysis of buprofezin, bupirimate, hexaflumuron, tebufenpyrad, fluvalinate and pyriproxyfen in citrus fruits. Extracts were obtained by matrix solid-phase dispersion (MSPD) using C 18 as dispersant and dichloromethane-methanol (80:20, v/v) as eluent. Matrix effects were tested for all matrices by addition of standard to sample blank extracts (samples containing no detectable residues). Mean recoveries obtained at fortification levels between 0.01 and 5 mg kg −1 were 57–97% with relative standard deviations (RSDs) from 5 to 19%. The limits of quantificatio…

Spectrometry Mass Electrospray IonizationChromatographyChemistryOrganic ChemistryReproducibility of ResultsGeneral MedicineMass spectrometryBiochemistryHigh-performance liquid chromatographySensitivity and SpecificityAnalytical ChemistryTriple quadrupole mass spectrometerMatrix (chemical analysis)Liquid chromatography–mass spectrometryFruitmedia_common.cataloged_instanceSample preparationSolid phase extractionEuropean unionPesticidesmedia_commonChromatography LiquidJournal of chromatography. A
researchProduct

Liquid chromatography–electrospray quadrupole ion-trap mass spectrometry of nine pesticides in fruits

2004

A liquid chromatographic method, with electrospray ionization tandem mass spectrometry (LC-ESI-MS-MS), has been developed for determining acrinathrin, carbosulfan, cyproconazole, lambda-cyhalothrin, kresoxim methyl, pyrifenox, pyriproxyfen, propanil, and tebufenpyrad in fruits. The ions prominent in ESI spectra were [M + H]+ and [M + Na]+. In the mass analyzer, collision-induced dissociation fragmentation involved common pathways, for example, product ions of [M + H]+ resulted from the cleavage of the carbamic group or an oxygen bound. The utility of the method is demonstrated by the analysis of crude extracts obtained by matrix solid-phase dispersion (MSPD) using C18 as dispersant and dich…

Spectrometry Mass Electrospray IonizationElectrosprayChromatographyChemistryElectrospray ionizationOrganic ChemistryGeneral MedicineTandem mass spectrometryMass spectrometryBiochemistryHigh-performance liquid chromatographyAnalytical ChemistryMatrix (chemical analysis)FruitCalibrationSolid phase extractionIon trapPesticidesChromatography LiquidJournal of Chromatography A
researchProduct

Development and Validation of a LC-ESI-MS/MS Method for the Determination of Alternaria Toxins Alternariol, Alternariol Methyl-Ether and Tentoxin in …

2016

Alternaria species are capable of producing several secondary toxic metabolites in infected plants and in agricultural commodities, which play important roles in food safety. Alternaria alternata turn out to be the most frequent fungal species invading tomatoes. Alternariol (AOH), alternariol monomethyl ether (AME), and tentoxin (TEN) are some of the main Alternaria mycotoxins that can be found as contaminants in food. In this work, an analytical method based on liquid chromatography (LC) tandem mass spectrometry (MS/MS) detection for the simultaneous quantification of AOH, AME, and TEN in tomato and tomato-based products was developed. Mycotoxin analysis was performed by dispersive liquid-…

Spectrometry Mass Electrospray IonizationHealth Toxicology and MutagenesisAlternariollcsh:MedicineFood ContaminationtomatoToxicologyTandem mass spectrometry01 natural sciencesAlternaria alternataPeptides CyclicArticleMatrix (chemical analysis)chemistry.chemical_compoundLactones0404 agricultural biotechnologySolanum lycopersicumTandem Mass SpectrometryLC-MS/MSdispersive liquid-liquid microextractionMycotoxinDetection limitChromatographybiology010401 analytical chemistrylcsh:RReproducibility of ResultsAlternaria04 agricultural and veterinary sciencesMycotoxinsAlternariabiology.organism_classification040401 food science0104 chemical scienceschemistryTentoxinChromatography Liquid<i>Alternaria</i>; LC-MS/MS; dispersive liquid-liquid microextraction; tomatoToxins; Volume 8; Issue 11; Pages: 328
researchProduct