Search results for "MORPHOLOGY"
showing 10 items of 1425 documents
Amorphous hydrogenated carbon (a-C:H) depositions on polyoxymethylene: Substrate influence on the characteristics of the developing coatings
2016
Abstract After oxygen plasma treatment polyoxymethylene (POM) material was exposed to acetylene plasma to progressively deposit two different types of amorphous hydrogenated carbon (a-C:H) films. Radio frequency plasma-enhanced chemical vapor deposition (RF-PECVD) was used to generate both plasma processes. The surface morphology of the coated samples has been investigated by atomic force microscopy (AFM) and their chemical composition by Diffusive Reflectance Infrared Fourier Transform (DRIFT) and Raman spectroscopy. Results revealed the absence of a solid interlayer formation between the a-C:H films and POM. The in sequence exposure of oxygen and acetylene plasma on POM substrate prevents…
Temporal control of xyloglucan self-assembly into layered structures by radiation-induced degradation
2016
Partially degalactosylated xyloglucan from tamarind seeds (Deg-XG) is a very appealing biopolymer for the production of in situ gelling systems at physiological temperature. In this work, we observe that the morphology of hydrogels evolves towards high degrees of structural organization with time, yielding to dense stacks of thin membranes within 24 h of incubation at 37 °C. We also explore the possibility offered by gamma irradiation of controlling the time scale of this phenomenon, the final morphology and mechanical properties of the system. Structural and molecular modifications of Deg-XG with dose are investigated by FTIR, dynamic light scattering (DLS) and rotational viscosimetry. The…
Dynamic Tuning of Viscoelastic Hydrogels with Carbonyl Iron Microparticles Reveals the Rapid Response of Cells to Three-Dimensional Substrate Mechani…
2021
Current methods to dynamically tune three-dimensional hydrogel mechanics require specific chemistries and substrates that make modest, slow, and often irreversible changes to their mechanical properties, exclude the use of protein-based scaffolds, or alter hydrogel microstructure and pore size. Here, we rapidly and reversibly alter the mechanical properties of hydrogels consisting of extracellular matrix proteins and proteoglycans by adding carbonyl iron microparticles (MP) and applying external magnetic fields. This approach drastically alters hydrogel mechanics: rheology reveals that application of a 4,000 Oe magnetic field to a 5 mg/mL collagen hydrogel containing 10 wt% MPs increases th…
Atomic Force Microscopy Study of Yeast Cells Influenced by High Voltage Electrical Discharge
2008
Human cells are the eukaryotic ones. Simulation of wide-spectrum electromagnetic radiation influence on eukaryotic cells was performed with yeast which is usually used now in molecular biological and medical biological investigations as the ideal model of eukaryotic system. The aim of the research was to observe possible induced alterations of the cell morphology. Atomic force microscopy (AFM) and electron scanning microscopy (ESM) have been applied to image the surface of cells exposed to electromagnetic radiation.
Biocompatibility of New Pulp-capping Materials NeoMTA Plus, MTA Repair HP, and Biodentine on Human Dental Pulp Stem Cells
2017
The aim of the present study was to evaluate the in vitro cytotoxicity of MTA Repair HP, NeoMTA Plus, and Biodentine, new bioactive materials used for dental pulp capping, on human dental pulp stem cells (hDPSCs).Biological testing was carried out in vitro on hDPSCs. Cell viability and cell migration assays were performed using eluates of each capping material. To evaluate cell morphology and cell attachment to the different materials, hDPSCs were directly seeded onto the material surfaces and analyzed by scanning electron microscopy. The chemical composition of the pulp-capping materials was determined by energy-dispersive X-ray and eluates were analyzed by inductively coupled plasma-mass …
Cytotoxicity of Root Canal Filling Materials to Three Different Human Cell Lines
2001
The aim of this study was to investigate the biological compatibility of five root canal sealers (Sealapex, Endion, Super-EBA, Ketac-Endo, and AH Plus) and regular and calcium hydroxide-based gutta-percha in three different human cell lines. Cultures without root canal sealers were used as controls. Cell growth, cell morphology, cell viability, protein content of the cells, and prostaglandin E 2 (PGE 2 ) release were used as parameters to determine the cytotoxicity of the materials. The protein content of the three cell lines—nasal fibroblasts, gingival fibroblasts, and epithelial tumor cells—was significantly reduced (p ≤ 0.001) by all materials tested. Determinations of PGE 2 release show…
The role of metal corrosion in inflammatory processes: induction of adhesion molecules by heavy metal ions
1994
Prosthetic devices undergo corrosion processes after implantation including the release of certain amounts of metal ions into the adjacent tissues. On reaching the bloodstream, a systemic influence of those ions may be envisaged. Cell adhesion molecules (CAMs) are recognized as an essential component of the mechanisms of endothelial damage. To study the influence of selected heavy metals on human umbilical vein endothelial cells (HUVEC) EIA methods were used to evaluate cellular expression of E-selectin, ICAM-1, VCAM-1 and GMP-140 under the influence of high (cytotoxic) very low (non-cytotoxic) concentrations of Zn, Ni, Co and Cr. The de novo synthesis of CAMs was studied with the help of m…
Morphology and properties of poly(methyl methacrylate) (PMMA) filled with mesoporous silica (MCM-41) prepared by melt compounding
2016
This paper reports on the morphologies of poly(methyl methacrylate) (PMMA)/mesoporous silica (MCM-41) composites prepared by melt compounding with various MCM-41 contents in the range of 0.1–5 wt%, the interactions between the polymer and filler in these composites, and their thermomechanical, mechanical and thermal degradation properties. The composites formed transparent films at low filler loadings (\0.5 wt%) because of well-dispersed, unagglomerated particles. The presence of polymer did not alter the pore dimensions in the MCM-41 structure and it maintained its hexagonal structure, even though the polymer chains partially penetrated the pores during composite preparation. The PMMA inte…
Progress in Violet Light-Emitting Diodes Based on ZnO/GaN Heterojunction
2020
Progress in light-emitting diodes (LEDs) based on ZnO/GaN heterojunctions has run into several obstacles during the last twenty years. While both the energy bandgap and lattice parameter of the two semiconductors are favorable to the development of such devices, other features related to the electrical and structural properties of the GaN layer prevent an efficient radiative recombination. This work illustrates some advances made on ZnO/GaN-based LEDs, by using high-thickness GaN layers for the p-region of the device and an ad hoc device topology. Heterojunction LEDs consist of a quasicoalesced non-intentionally doped ZnO nanorod layer deposited by chemical bath deposition onto a metal&ndash
Faceting and structural anisotropy of nanopatterned CdO(110) layers
2005
CdO(110) layers with a self-organized surface structure have been grown on (10math0) sapphire (m plane) substrates by metal-organic vapor phase epitaxy. The epitaxial relationships between layer and substrate have been determined and a crystallographic model that accounts for the CdO in-plane orientation, which results in a reduced lattice mismatch when the CdO[001] direction is perpendicular to the sapphire c axis, has been proposed. Although the measured lattice parameters indicate that the layers are almost fully relaxed, an anisotropic mosaicity is detected with symmetrical rocking curves attaining minimum values when measured along the CdO[math10] direction. The layer morphology consis…