Search results for "NANOCOMPOSITE"
showing 10 items of 641 documents
Review on Polymers for Thermoelectric Applications.
2014
In this review, we report the state-of-the-art of polymers in thermoelectricity. Classically, a number of inorganic compounds have been considered as the best thermoelectric materials. Since the prediction of the improvement of the figure of merit by means of electronic confinement in 1993, it has been improved by a factor of 3-4. In the mean time, organic materials, in particular intrinsically conducting polymers, had been considered as competitors of classical thermoelectrics, since their figure of merit has been improved several orders of magnitude in the last few years. We review here the evolution of the figure of merit or the power factor during the last years, and the best candidates…
Continuous Broadband MWP True-Time Delay with PbS-PMMA and -SU8 waveguides
2016
[EN] A new microwave true-time delay (TTD) photonic unit based on the dispersion of PbS colloidal quantum dots (QDs) in a Polymethyl methacrylate (PMMA) and the SU8 photoresist is presented. With this aim, the PbS-PMMA and PbS-SU8 nanocomposites are integrated on a silicon platform in the form of a planar and ridge waveguides, respectively. When PbS QDs on those structures are pumped below their band-gap, a phase shift and a temporal delay in an optically conveyed (at 1550 nm) microwave signal is performed. The results of these devices show potential benefits over current TTD technologies, since the proposed photonic waveguide structures allows real-time adjustment of the temporal delay by …
Structural and thermal stability of graphene oxide-silica nanoparticles nanocomposites
2017
Abstract The investigation of the thermal stability up to 400 °C of Graphene Oxide (GO) and GO-silica nanoparticles (n-SiO2) composites prepared by direct mixture of GO and n-SiO2 is reported. Using Scanning Electron Microscopy, X-ray Photoelectron Spectroscopy, Energy Dispersive X-ray analysis, Atomic Force Microscopy, Raman and Infrared absorption measurements a thorough characterization of the prepared materials is carried out. By deepening the changes induced in the 2D Raman spectral region of GO at about 2900 cm−1 the comprehension of an interplay, driven by the thermally induced changes of the material, between inter-valley and intra-valley vibrational transitions is elucidated. This …
Temperature Sensor Based on Colloidal Quantum Dots PMMA Nanocomposite Waveguides
2012
In this paper, integrated temperature sensors based on active nanocomposite planar waveguides are presented. The nanocomposites consist of cadmium selenide (CdSe) and cadmium telluride (CdTe) quantum dots (QDs) embedded in a polymethylmethacrylate (PMMA) matrix. When the samples are heated in a temperature range from 25$^{circ}{rm C}$ to 50 $^{circ}{rm C}$, the waveguided photoluminescence of QDs suffers from a strong intensity decrease, which is approximately quadratic dependent on temperature. Moreover, the wavelength peak of the waveguided emission spectrum of CdTe-PMMA shows a blue shift of 0.25 ${rm nm}/^{circ}{rm C}$, whereas it remains constant in the case of CdSe-PMMA. A temperature…
Graphene Cardboard: from Ripples to Tunable Metamaterial
2014
Recently graphene was introduced with tunable ripple texturing, a nanofabric enabled by graphene's remarkable elastic properties. However, one can further envision sandwiching the ripples, thus constructing composite nanomaterial, graphene cardboard. Here the basic mechanical properties of such structures are investigated computationally. It turns out that graphene cardboard is highly tunable material, for its elastic figures of merit vary orders of magnitude, with Poisson ratio tunable from 10 to -0.5 as one example. These trends set a foundation to guide the design and usage of metamaterials made of rippled van der Waals solids.
Recycled Polycarbonate Based Nanocomposites
2013
Post-consumer polycarbonate (RPC) blends with various amounts (5, 10, 30 wt. %) of ethylene vinyl acetate copolymer (EVAc) are investigated as potential nanocomposite matrices. At EVAc weight content of 10 wt.% maximum tensile strength σM and impact strength AI increase is observed in comparison to neat RPC. Addition of EVAc, however, reduces resistance to creep as well as decrease thermal stability of the investigated compositions. Addition of montmorillonite nanoclay (MMT), however, allows increase modulus of elasticity E and yield strength σY of the investigated RPC blend with 10 wt. % of EVAc. Besides it creep resistance and thermal resistance of the investigated system is increased to …
Injection Molding and Mechanical Properties of Bio-Based Polymer Nanocomposites
2018
The use of biodegradable/bio-based polymers is of great importance in addressing several issues related to environmental protection, public health, and new, stricter legislation. Yet some applications require improved properties (such as barrier or mechanical properties), suggesting the use of nanosized fillers in order to obtain bio-based polymer nanocomposites. In this work, bionanocomposites based on two different biodegradable polymers (coming from the Bioflex and MaterBi families) and two different nanosized fillers (organo-modified clay and hydrophobic-coated precipitated calcium carbonate) were prepared and compared with traditional nanocomposites with high-density polyethylene (HDPE…
Processing-structure-property relationships of electrospun PLA-PEO membranes reinforced with enzymatic cellulose nanofibers
2020
Abstract Three different solvent mixtures were used to prepare electrospun membranes based on polylactic acid (PLA), polyethylene oxide (PEO) and enzymatic cellulose nanofibers (CNF). The materials were characterized from a morphological, spectroscopic, mechanical and rheological point of view. Furthermore, swelling test were performed in order to assess the water uptake of each sample. The results put into evidence that the choice of the solvents affects the structure and the properties of the membranes. Among the protocols tested, using chloroform/acetone/ethanol mixture was found to allow a high degree of CNF dispersion and a good electrospinnability of polymer solutions. These features …
Rheological Response of Polyethylene/Clay Nanocomposites to Annealing Treatment
2007
The rheological response of a polyethylene/clay nanocomposite to annealing treatment under air and nitrogen atmospheres was studied. The treatment influences the rheology of the nanocomposite significantly. In particular, the viscosity and the non-Newtonian behavior dramatically increase with annealing time, and a liquid-like/solid-like transition is observed. The annealed samples were characterized by ATR-FT-IR spectrometry and it was shown that a silicate-rich layer is formed on the surface of the nanocomposite. This result was confirmed by TEM images of bulk and surface of annealed samples. It was demonstrated that the formation of this coating is the main cause of the change of rheologi…
Advanced ultra-high molecular weight polyethylene/antioxidant-functionalized carbon nanotubes nanocomposites with improved thermo-oxidative resistance
2015
Multiwalled carbon nanotubes (CNTs) functionalized with hindered phenol moieties are dispersed in ultra-high molecular weight polyethylene (UHMWPE), and the stabilizing action of the antioxidant (AO) functionalized CNTs (AO-f-CNTs) is studied through a combination of rheological and spectroscopic (FT-IR) analyses. The effectiveness of two alternative compounding methods, namely hot compaction (HC) and melt mixing (MM), is compared. The combination of high temperature and mechanical stress experienced during MM brings about noticeable degradation phenomena of the matrix already in the course of the compounding step. Differently, the milder conditions of the HC process preserve the stability …