Search results for "Oxide"
showing 10 items of 6424 documents
Full maxillary rehabilitation with an all-ceramic system
2009
With the appearance of all-ceramic systems, providing a choice of framework porcelains and allowing the same material to be used for the veneer, it is now possible to select the ideal structure in terms of both function and esthetics. Silicate ceramics allow porcelain laminate veneers and crowns to be used in the anterior region, providing excellent esthetics; while for the posterior area, where function takes precedence, oxide ceramics, specifically zirconium oxide, are preferred. The IPS e.max ceramic system, heir apparent to the IPS Empress 2 system, combines the advantages of zirconium oxide ceramics (IPS e.max Zircad) with the excellent esthetic qualities of silicate ceramics (IPS e.ma…
Effects of femtosecond laser and other surface treatments on the bond strength of metallic and ceramic orthodontic brackets to zirconia.
2017
Femtosecond laser has been proposed as a method for conditioning zirconia surfaces to boost bond strength. However, metallic or ceramic bracket bonding to femtosecond lasertreated zirconia surfaces has not been tested. This study compared the effects of four conditioning techniques, including femtosecond laser irradiation, on shear bond strength (SBS) of metallic and ceramic brackets to zirconia.Three hundred zirconia plates were divided into five groups: 1) control (C); 2) sandblasting (APA); 3) silica coating and silane (SC); 4) femtosecond laser (FS); 5) sandblasting followed by femtosecond laser (APA+SC). A thermal imaging camera measured temperature changes in the zirconia during irrad…
Fracture resistance and the mode of failure produced in metal-free crowns cemented onto zirconia abutments in dental implants.
2019
The purpose of the investigation was to analyze fracture resistance and mode of failure of zirconium oxide (zirconia) abutments placed on dental implants bearing crowns of different esthetic materials: zirconia, lithium disilicate (LDS), and nano-ceramic resin, for replacing single teeth in the anterior sector. Eighty implant-abutment-crown units were divided into four groups: Group T-MC (control): 20 metal-ceramic crowns cemented onto titanium abutments; Group Z-Z: 20 zirconia crowns on zirconia abutments; Group Z-LD: 20 lithium disilicate crowns on zirconia abutments; and Group Z-NCR: 20 nano-ceramic resin crowns on zirconia abutments. Specimens underwent a fatiguing process (dynamic load…
Dimethylsulfoxide as carrier in enzyme cytochemistry.
1971
Addition of dimethylsulfoxide (DMSO) to the incubation medium of succinate dehydrogenase in a concentration of 10% enhances the staining reaction in the hyphae of the fungus Cercosporella herpotrichoides after an incubation period of 15 min. Controls without DMSO remain unstained. DMSO causes a rapid penetration of the components of the medium through the mucilage that covers the hyphae.
Influence of barium and cerium oxides on alumina supported Pd catalysts for hydrocarbon combustion
2002
Abstract The effects of baria and ceria additions to alumina-supported palladium catalysts have been investigated. Two series of binary Al 2 O 3 –BaO and ternary oxides Al 2 O 3 –CeO 2 –BaO were prepared using a sol–gel method and then characterized, after high-temperature treatments, by XRD, BET, TG, TEM and EDXS analyses. The influence of baria and ceria on the thermal stability and morphology of the supports was examined. A baria content of 12 wt.% appears the most effective for alumina stabilization. Palladium catalysts were prepared by impregnation method using Pd(NH 3 ) 4 (NO 3 ) 2 and were characterized by XRD and TEM. The catalysts showed high activity in the total oxidation of meth…
Mesoporous SBA-15 silica modified with cerium oxide: Effect of ceria loading on support modification
2010
Abstract The present work investigates the effect of ceria loading on silica SBA-15. Five CeO2/SBA-15 samples with CeO2 content equal to 5, 10, 15, 20 and 30 wt% were prepared by wetness-impregnation of the support with cerium nitrate hexahydrate, as precursor, dissolved in ethanol. After drying at room temperature, the resulting samples were calcined at 400 °C for 2h. Characterizations by BET surface area and pore-size distribution, XRD, NH3-TPD and H2-TPR were performed.
Structural and Chemical Characterization of Cerium Oxide Thin Layers Grown on Silicon Substrate
2015
In this study, we report transmission electron microscopy and electron energy loss spectroscopy study of cerium oxide thin layers deposited on silicon substrate. Transmission electron microscopy experiments have revealed the flat morphology of the deposited layers. In addition, studies of high resolution images have indicated the presence of mainly ceria crystallized nanoparticles. Energy electron loss spectroscopy measurements were also performed in scanning mode to study the evolution of the cerium valence. In addition to Ce4+ inside the layer, the presence of amorphous cerium silicate with valence +3 is pointed out at the vicinity of the substrate.
Effect of Impurities (Carbon and Manganese) on Iron Oxidation at High Temperature: Impurities-Rare Earth Element (Cerium) Interactions
1997
Apres oxydation du fer pur revetu d'un depot de CeO 2 , (T = 7000C, pO 2 = 0,04 Pa), le cerium se trouve localise dans la couche de wustite sous la forme de CeFeO 3 . La dissolution de cette phase assure l'introduction homogene du cerium a l'interieur de la couche de FeO. Sa formation est attribuee a un processus d'oxydo-reduction entre le depot de CeO 2 et les premiers germes de FeO. Dans le cas des echantillons d'acier Fe-Mn-C, recouverts de CeO 2 , le cerium n'est pas incorpore dans la couche d'oxyde de fer de facon homogene et se retrouve sous la forme de CeO 2 a l'interface oxyde-gaz. Le role de chaque impurete est maintenant bien etabli: le manganese inhibe l'incorporation du cerium d…
XPS study of supported gold catalysts:the role of Au0 and Au+? species as active sites.
2006
Gold nanoparticles supported on different oxides (SiO2, CeO2 and TiO2) were prepared by the SMAD (solvated metal atom dispersion) and deposition–precipitation (DP) techniques. The physical and chemical characterization of the catalysts was performed by X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) and the catalytic activity was tested during the reaction of low temperature CO oxidation. The structural and surface analyses evidenced the presence of small gold crystallites (cluster size ∼2–5 nm) in all the SMAD-prepared samples and oxidized gold species in the case of the DP catalysts. A different surface distribution of ionic gold species was found on the different suppo…
Relationship between structure and CO oxidation activity of ceria supported gold catalysts
2005
Gold catalysts supported on cerium oxide were prepared by solvated metal atom dispersion (SMAD), by deposition-precipitation (DP), and by coprecipitation (CP) methods and were characterized by X-ray diffraction (XRD), temperature programmed reduction (TPR), and X-ray photoelectron spectroscopy (XPS). The catalytic activity was tested in the CO oxidation reaction. The structural and surface analyses evidenced the presence of a modified ceria phase in the case of the DP sample and the presence of pure ceria and gold metal crystallites in the case of the SMAD and CP samples. The DP sample, after a mild treatment in air at 393 K, exhibited only ionic gold, and it was very active below 273 K. By…