Search results for "TRIX"
showing 10 items of 3314 documents
Effect of sodium bicarbonate treatment on mechanical properties of flax-reinforced epoxy composite materials
2017
This paper deals with the evaluation of the effect of an eco-friendly and cost-effective surface treatment based on the use of sodium bicarbonate on the mechanical properties of flax-reinforced epoxy composites. To this aim, unidirectional fabrics were soaked for five days in 5 and 10% in weight of sodium bicarbonate solution at 25℃. Quasi-static and dynamic mechanical tests were performed and the fracture surfaces of the composites were analyzed through scanning electron microscopy. Results evidenced that this treatment improves the fiber–matrix adhesion thus increasing the performances of the composites. Treating the fabrics with 10% w/w of bicarbonate solution leads to improvements of ∼…
Synthesis and degradation of type IV collagen in rat skeletal muscle during immobilization in shortened and lengthened positions
2003
Aim: Type IV collagen is a major protein in basement membranes surrounding and supporting skeletal muscle cells. In the present study, we tested the hypotheses that immobilization down-regulates synthesis and up-regulates degradation of type IV collagen in skeletal muscle. Methods: mRNA level and concentration of type IV collagen as well as mRNA levels and activities of proteins involved in its degradation were analysed from soleus (SOL), gastrocnemius (GAS) and extensor digitorum longus muscles after immobilization in shortened and lengthened positions for 1, 3 and 7 days. Results: Following immobilization, type IV collagen mRNA level was decreased in SOL and GAS suggesting down-regulat…
Determination of organophosphate flame retardants in soil and fish using ultrasound-assisted extraction, solid-phase clean-up, and liquid chromatogra…
2017
A solid–liquid extraction method in combination with high‐performance liquid chromatography and tandem mass spectrometry was developed and optimized for extraction and analysis of organophosphorus flame retardants in soil and fish. Methanol was chosen as the optimum extraction solvent, not only in terms of extraction efficiency, but also for its broader analyte coverage. The subsequent clean‐up by solid‐phase extraction is required to eliminate matrix coextractives and reduce matrix effects. Recoveries of the optimized method were 50–121% for soil and 47–123% for biota, both with high precision (RSDs <12% in soil and <23% in biota). The method limits of detection ranged from 0.06 to 0.20 ng…
A statistical design of experiments for optimizing the MALDI-TOF-MS sample preparation of polymers. An application in the assessment of the thermo-me…
2011
[EN] The sample preparation procedure for MALDI-TOF MS of polymers is addressed in this study by the application of a statistical Design of Experiments (DoE). Industrial poly (ethylene terephthalate) (PET) was chosen as model polymer. Different experimental settings (levels) for matrixes, analyte/matrix proportions and concentrations of cationization agent were considered. The quality parameters used for the analysis were signal-to-noise ratio and resolution. A closer inspection of the statistical results provided the study not only with the best combination of factors for the MALDI sample preparation, but also with a better understanding of the influence of the different factors, individua…
Assessing the MALDI-TOF MS sample preparation procedure to analyze the influence of thermo-oxidative ageing and thermo-mechanical degradation on poly…
2011
[EN] Multiple processing by means of successive injection cycles was used to simulate the thermo-mechanical degradation effects on the oligomeric distribution of PLA under mechanical recycling. Likewise, an accelerated thermal ageing over PLA glass transition was performed in order to simulate its service life. MALDI-TOF MS was used for the analysis and the sample preparation procedure was assessed by means of a statistical Design of Experiments (DoE). The quality effects in use for the analysis were signal-to-noise ratio and Resolution. Different matrixes, analyte/matrix proportions and the use of NaTFA as cationization agent were considered. A deep inspection of the statistical results pr…
Beeswax cleaning by solvent extraction of pesticides
2018
We set out to test if the methodology used to clean sheep wool wax (Lanolin) from pesticides could be used to clean beeswax as well. We first made an aggregate sample of brood comb wax from three different US beekeepers. Sub-samples of these aggregate wax samples were analyzed for pesticide contamination. The remaining wax, was then dissolved into hexane solution and run through four N, N-Dimethylformamide (DMF) washes. During these extractions, the pesticides partitioned into the DMF, and so were removed from the beeswax. Following the solvent extractions, the beeswax was tested again for pesticides. An average of 95% of the pesticide contamination was removed by the chemical wash procedur…
Current trends in solid-phase-based extraction techniques for the determination of pesticides in food and environment
2006
Solid-phase extraction (SPE) procedures for pesticide residues in food and environment are reviewed and discussed. The use of these procedures, which include several approaches such as: matrix solid-phase dispersion (MSPD), solid-phase micro-extraction (SPME) and stir-bar sorptive extraction (SBSE), represents an opportunity to reduce analysis time, solvent consumption, and overall cost. SPE techniques differ from solvent extraction depending on the interactions between a sorbent and the pesticide. This interaction may be specific for a particular pesticide, as in the interaction with an immunosorbent, or non-specific, as in the way a number of different pesticides are adsorbed on apolar or…
Reduced graphene oxide-based magnetic composite for trace determination of polycyclic aromatic hydrocarbons in cosmetics by stir bar sorptive dispers…
2020
This work describes a sensitive and rapid analytical method for trace determination of polycyclic aromatic hydrocarbons (PAHs) in cosmetic samples. The proposed method is based on stir bar sorptive-dispersive microextraction (SBSDME). A magnetic composite made of CoFe2O4 magnetic nanoparticles embedded into reduced graphene oxide sheets is used as sorbent phase. After the extraction, the target analytes are desorbed in toluene and then analyzed by gas chromatography-mass spectrometry (GC-MS). The main parameters involved in the extraction procedure (i.e., composite amount, extraction time and desorption time) were evaluated and optimized to provide the best extraction efficiency. The method…
Sample preparation strategies for the determination of psychoactive substances in biological fluids
2020
This review focuses on the existing analytical procedures for the determination of new psychoactive substances (NPS) in biological fluids by chromatographic methods. Direct analysis of samples is scarcely employed and most proposed methodologies include a sample pre-treatment in order to remove matrix interferents and, in some cases, pre-concentrate extracts. Current extraction methods for NPS determination in plasma/serum, urine, and oral fluids have been widely discussed, such as liquid-liquid, solid-phase, and micro extraction approaches, highlighting the advantages and drawbacks of the proposed extraction methodologies. Regarding microextraction approaches, techniques like microextracti…
A hybrid nano-MOF/polymer material for trace analysis of fluoroquinolones in complex matrices at microscale by on-line solid-phase extraction capilla…
2021
Abstract A hybrid material (nano-metal organic framework@organic polymer, named as nano-MOF@polymer) was applied for the first time as sorbent for on-line solid-phase extraction capillary electrophoresis with ultraviolet detection (SPE-CE-UV). The resulting material was prepared building layer-by-layer a HKUST-1 (Hong Kong University of Science and Technology-1) nano-MOF onto the polymer surface, which allowed controlling the thickness and maximizing the active surface area. The sorbent was widely characterized at micro- and nano-scale to validate the synthesis and to establish the material properties. Then, fritless microcartridges (2 mm) were assembled by packing only a few micrograms of …