Search results for "crystals"
showing 10 items of 350 documents
Positron lifetime measurements on neutron‐irradiated InP crystals
1996
Neutron‐irradiated InP single crystals have been investigated by positron‐lifetime measurements. The samples were irradiated with thermal neutrons at different fluences yielding concentrations for Sn‐transmuted atoms between 2×1015 and 2×1018 cm−3. The lifetime spectra have been analyzed into one exponential decay component. The mean lifetimes show a monotonous increase with the irradiation dose from 246 to 282 ps. The increase in the lifetime has been associated to a defect containing an Indium vacancy. Thermal annealing at 550 °C reduces the lifetime until values closed to those obtained for the as‐grown and conventionally doped InP crystals. navarrof@evalvx.ific.uv.es ; Jose.Ferrero@uv.es
Comparison of cellulose nanocrystals obtained by sulfuric acid hydrolysis and ammonium persulfate, to be used as coating on flexible food-packaging m…
2016
Cellulose nanocrystals (CNCs), extracted from trees, plants, or similar cellulose-containing materials, can be used in combination with other materials to improve their performance or introduce new applications. The main purpose of this study was to compare and understand the potentialities, as coatings for Poly(ethylene terephthalate) films, of CNCs obtained starting from the same cotton linters by two different processes: sulfuric acid hydrolysis and a less common treatment with ammonium persulfate (APS), able to provide also a cellulose oxidation. The results showed that CNCs produced through the APS treatment showed higher charge densities, due to the carboxylic groups formed during the…
Development and In Vitro Evaluation of Lyotropic Liquid Crystals for the Controlled Release of Dexamethasone.
2017
Made available in DSpace on 2018-12-11T17:33:26Z (GMT). No. of bitstreams: 0 Previous issue date: 2017-08-02 Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) In this study, amphiphilic polymers were investigated as biomaterials that can control dexamethasone (DXM) release. Such materials present interfacial properties in the presence of water and an oily phase that can result in lyotropic liquid crystalline systems (LLCS). In addition, they can form colloidal nanostructures similar to those in living organisms, such as bilayers and hexagonal and cubic phases, which can be exploited to solubilize lipophilic drugs to sustain their release and enhance bioavailability. It was…
Defect Calculations for Yttrium Aluminum Perovskite and Garnet Crystals
2000
Native and impurity point defects in both Yttrium Aluminum Perovskite and Garnet crystals are studied in the framework of the pair-potential and the shell model approximations. The calculated formation energies for native defects suggest that the antisite disorder is preferred over the Frenkel and Schottky-like disorder in both YAP and YAG. In non-stoichiometric compounds, the calculated reaction energies indicate that excess of Y2O3 or Al2O3 is, most likely, to be accommodated by the formation of antisites rather than vacancies or interstitials in the lattice. Enthalpies of the reactions for impurity (Ca2+, Mg2+, Sr2+, Ba2+, Cr3+, Fe3+, Nd3+, Si4+) incorporation into both YAP and YAG latti…
Cellulose-inorganic hybrids of strongly reduced thermal conductivity
2022
Abstract The employment of atomic layer deposition and spin coating techniques for preparing inorganic-organic hybrid multilayer structures of alternating ZnO-CNC layers was explored in this study. Helium ion microscopy and X-ray reflectivity showed the superlattice formation for the nanolaminate structures and atomic force microscopy established the efficient control of the CNCs surface coverage on the Al-doped ΖnO by manipulating the concentration of the spin coating solution. Thickness characterization of the hybrid structures was performed via both ellipsometry and X-ray reflectivity and the thermal conductivity was examined by time domain thermoreflectance technique. It appears that ev…
Growth kinetics of colloidal Ge nanocrystals for light harvesters
2016
Colloidal Ge nanocrystals (NCs) are gaining increased interest because of their potential application in low-cost optoelectronic and light harvesting devices. However, reliable control of colloidal NC synthesis is often an issue and a deeper understanding of the key-role parameters governing NC growth is highly required. Here we report an extended investigation on the growth of colloidal Ge NCs synthesized from a one-pot solution based approach. A systematic study of the effects of synthesis time, temperature and precursor concentration is elucidated in detail. X-ray diffraction (XRD) analysis reveals the presence of crystalline Ge NCs with a mean size (from 5 to 35 nm) decreasing with the …
Carrier-induced quenching processes on the erbium luminescence in silicon nanocluster devices
2006
The luminescence-quenching processes limiting quantum efficiency in Er-doped silicon nanocluster light-emitting devices are investigated and identified. It is found that carrier injection, while needed to excite Er ions through electron-hole recombination, at the same time produces an efficient nonradiative Auger deexcitation with trapped carriers. This phenomenon is studied in detail and, on the basis of its understanding, we propose device structures in which sequential injection of electrons and holes can improve quantum efficiency by avoiding Auger processes. © 2006 The American Physical Society.
Silicon-based light-emitting devices: Properties and applications of crystalline, amorphous and er-doped nanoclusters
2006
In this paper, we summarize the results of an extensive investigation on the properties of MOS-type light-emitting devices based on silicon nanostructures. The performances of crystalline, amorphous, and Er-doped Si nanostructures are presented and compared. We show that all devices are extremely stable and robust, resulting in an intense room temperature electroluminescence (EL) at around 900 nm or at 1.54 μm. Amorphous nanoclusters are more conductive than the crystalline counterpart. In contrast, nonradiative processes seem to be more efficient for amorphous clusters resulting in a lower quantum efficiency. Erbium doping results in the presence of an intense EL at 1.54 μm with a concomit…
Residual crystalline silicon phase in silicon-rich-oxide films subjected to high temperature annealing
2002
Structural properties of silicon rich oxide films (SRO) have been investigated by means of micro-Raman spectroscopy and transmission electron microscopy (TEM). The layers were deposited by plasma enhanced chemical vapor deposition using different SiH4/O2 gas mixtures. The Raman spectra of the as-deposited SRO films are dominated by a broad band in the region 400-500 cm-1 typical of a highly disordered silicon network. After annealing at temperatures above 1000°C in N2, the formation of silicon nanocrystals is observed both in the Raman spectra and in the TEM images. However, most of the precipitated silicon does not crystallize and assumes an amorphous microstructure. © 2002 The Electrochem…
Micromoulding of three-dimensional photonic crystals on silicon substrates
2003
International audience; The growth of three-dimensional photonic crystals (PhCs) on patterned silicon substrates is reported. It is shown that deep trenches can be uniformly filled by a self-assembly of polymer microspheres, in a close-packed face-centred cubic lattice. The crystalline quality is compared for different channel widths. These observations are confirmed by optical reflectance measurements in the visible range, showing a bandwidth of enhanced reflection. The possibility to detach the PhC, i.e. to use the substrate as a mould, is also demonstrated. The potential of this approach for building PhC-based complex architectures is discussed.